journal article·2020-03

The significant effect of non-recrystallization zone reduction on microstructure and mechanical properties in multi-phase steel from the perspective of crystallographic structure and variant pairing

M.Y. Sun, Z.Q. Wang, X.M. Wang, C.J. Shang, R.D.K. Misra

Publisher page

Abstract

Abstract We elucidate here the significant effect of non-recrystallization zone reduction on microstructure and mechanical properties in multi-phase steel from the perspective of crystallographic structure, particularly, digitization and visualization of variant pairing. The volume fraction of deformation induced ferrite increased with the increase of non-recrystallization zone reduction, accompanied by the increase of acicular ferrite. This behavior is related to suppression of upper bainite by occupying the prior austenite grain boundaries by allotriomorphic ferrite. The increase of non-recrystallization zone reduction led to a transition from upper bainite to acicular ferrite, and consequently influenced the mechanical properties. The multi-phase steel with a microstructure consisting of ultra-fine ferrite, bainite and a large volume fraction of acicular ferrite had an excellent combination of high yield strength (561 MPa), low yield-to-tensile ratio (0.81), high uniform elongation (11.4%) and remarkable cryogenic toughness of 212 J tested at −100 °C. There was a dominance of V1/V8 pairing in upper bainite, resulting in low density of high angle grain boundaries (HAGBs). While the density of HAGBs in acicular ferrite/bainite was significantly higher because of microstructure refinement by acicular ferrite and the transition in variant pairing from V1/V8 to V1/V2. The V1/V2 pair was primarily related to the boundaries between acicular ferrite and bainite. Moreover, the brittle crack propagated straightly in upper bainite. In contrast, the high density of HAGBs in acicular ferrite/bainite impeded and arrested microcracks before they grew to a critical Griffith crack length, and subsequently suppressed the initiation of cleavage crack and decreased the ductile–brittle transition temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Wilson · 1988 · 259
2. Multicomponent high-strength low alloy steel precipitation-strengthened by sub-nanometric Cu precipitates and M2C carbides10.1007/s11661-016-3569-5 ↗
3. State-of-the-art and development trends of HSLA steels in China
4. Relation among rolling parameters, microstructures and mechanical properties in an acicular ferrite pipeline steel10.1016/j.matdes.2009.03.026 ↗
5. Enhancement of low temperature toughness of nanoprecipitates strengthened ferritic steel by delamination structure10.1016/j.msea.2017.03.018 ↗
6. Study of high strength pipeline steels with different microstructures10.1016/j.msea.2008.10.042 ↗
7. Strain hardening behavior and stress ratio of high deformability pipeline steel with ferrite/bainite multi-phase microstructure
8. Micromechanical behavior and failure mechanism of F/B multi-phase high performance steel10.1016/S1006-706X(16)30077-2 ↗
9. Bhadeshia · 2001
10. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior10.1007/s11661-003-0010-7 ↗
11. Comparison on strength and toughness behaviors of microalloyed pipeline steels with acicular ferrite and ultrafine ferrite10.1016/S0167-577X(02)01013-3 ↗
12. Classification and quantification of microstructures in steels10.1179/026708304225010325 ↗
13. Mechanism of the transition from bainite to acicular ferrite10.2320/matertrans1989.32.679 ↗
14. Transition from bainite to acicular ferrite in reheated Fe–Cr–C weld deposits10.1179/026708390790189605 ↗
15. Mechanical properties of normal strength mild steel and high strength steel S690 in low temperature relevant to Arctic environment10.1016/j.matdes.2014.04.057 ↗
16. Structure–mechanical property relationship in low carbon microalloyed steel plate processed using controlled rolling and two-stage continuous cooling10.1016/j.msea.2013.07.071 ↗
17. Improved toughness and ductility in ferrite/acicular ferrite dual-phase steel through intercritical heat treatment10.1016/j.msea.2013.10.006 ↗
18. Mechanical properties of an ultrafine grained C–Mn steel processed by warm deformation and annealing10.1016/j.actamat.2005.07.009 ↗
19. Strain-induced ferrite formation and its effect on mechanical properties of a dual phase steel produced using laboratory simulated strip casting10.1016/j.jallcom.2017.06.050 ↗
20. Influence of deformation temperature on the ferrite grain refinement in a low carbon Nb–Ti microalloyed steel10.1016/j.jmatprotec.2006.04.018 ↗
21. Grain refinement in dual-phase steels10.1007/s11661-009-9899-9 ↗
22. Influence of deformation induced ferrite transformation on grain refinement of dual phase steel10.1016/S0921-5093(01)01359-4 ↗
23. Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel10.1016/j.actamat.2011.12.018 ↗
24. Effect of carbon content on variant pairing of martensite in Fe–C alloys10.1016/j.actamat.2012.09.046 ↗
25. In situ observations of the formation of fine-grained mixed microstructures of acicular ferrite and bainite in the simulated coarse-grained heated-affected zone10.1002/srin.201200313 ↗
26. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
27. New insights from crystallography into the effect of refining prior austenite grain size on transformation phenomenon and consequent mechanical properties of ultra-high strength low alloy steel10.1016/j.msea.2018.12.057 ↗
28. New insights into the mechanism of cooling rate on the impact toughness of coarse grained heat affected zone from the aspect of variant selection10.1016/j.msea.2017.07.095 ↗
29. Analysis of impact toughness scatter in simulated coarse-grained HAZ of E550 grade offshore engineering steel from the aspect of crystallographic structure10.1016/j.matchar.2018.03.037 ↗
30. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
31. 1983 · 123