Effect of Si content on microstructures, tensile properties, and creep properties in a cast Mg–6Al-0.4Mn–2Ca (wt.%) alloy
Source abstract
Abstract
Abstract Effect of Si content on microstructures, tensile properties, and creep properties in a gravity-cast Mg–6Al-0.4Mn–2Ca (wt.%, AMX6042) alloy has been investigated. High content of Si addition increases the ductility of the AMX6042 alloy without large loss of strengths; however, addition of Si over 0.6 wt.% decreases fraction of (Mg,Al)2Ca phases significantly. Moreover, such high content of Si promotes formation of Mg17Al12 phases, leading to poor creep properties. Although addition of Si tends to decrease fraction of (Mg,Al)2Ca phases and promote formation of Mg17Al12 phases, good creep properties could be kept up to 0.47 wt.% Si addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Creep studies of coarse-grained AZ91D magnesium castings10.1016/S0921-5093(98)00668-6 ↗
2. Effect of combined addition of Si and Sb on the microstructure and creep properties of AZ91 magnesium alloy10.1016/j.msea.2007.09.059 ↗
3. Effects of strontium and titanium on the microstructure, tensile properties and creep behavior of AM50 alloys10.1016/j.msea.2006.08.111 ↗
4. Effect of Ca additions on the microstructure, thermal stability and mechanical properties of a cast AM60 magnesium alloy10.1016/j.msea.2009.11.043 ↗
5. Effects of rare earth element additions on the impression creep behavior of AZ91 magnesium alloy10.1007/s11661-009-9905-2 ↗
6. Creep of diecast magnesium alloys AZ91D and AM6010.4271/910416 ↗
7. Creep deformation mechanisms in high-pressure die-cast magnesium-aluminum–base alloys10.1007/s11661-005-0036-0 ↗
8. Microstructure and tensile creep behavior of Mg–4Al based magnesium alloys with alkaline-earth elements Sr and Ca additions10.1016/j.msea.2005.12.017 ↗
9. Improved heat resistance of Mg-Al alloy by the Ca addition10.1016/0956-7151(94)00269-N ↗
10. An investigation of formation of second phases in microalloyed, AZ31 Mg alloys with Ca, Sr and Ce10.1016/j.jallcom.2009.11.159 ↗
11. Investigations of the properties of Mg–5Al–0.3Mn–xCe (x = 0–3, wt.%) alloys10.1016/j.jallcom.2008.09.143 ↗
12. Microstructure of Mg-5Al-0.4Mn-xRE (x = 3 and 5 wt.%) alloys in as-cast conditions and after annealing10.1016/j.jallcom.2015.12.029 ↗
13. Effect of strontium on the microstructure, mechanical properties, and fracture behavior of AZ31 magnesium alloy10.1007/s11661-006-1085-8 ↗
14. Microstructures and creep properties of Mg–4Al–(1–4) La alloys produced by different casting techniques10.1016/j.msea.2012.05.072 ↗
15. Creep properties of a Mg–Al–Ca alloy produced by different casting technologies10.1016/j.msea.2006.09.154 ↗
16. Correlation of microstructure and creep behaviour of MRI230D Mg alloy developed by two different casting technologies10.1016/j.msea.2015.02.037 ↗
17. Grain-scale creep processes in Mg–Al–Ca base alloys: implications for alloy design10.1016/j.scriptamat.2010.03.055 ↗
18. The 400 °C isothermal section of the Mg–Al–Ca system10.1016/j.intermet.2010.03.038 ↗
19. Thermodynamic modeling of the Mg–Al–Ca system10.1016/j.actamat.2008.10.037 ↗
20. Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys10.1016/j.actamat.2005.03.001 ↗
21. Al2(Mg,Ca) phases in Mg–Al–Ca ternary system: first-principles prediction and experimental identification10.1016/j.scriptamat.2006.03.068 ↗
22. Dislocation analysis of die-cast Mg–Al–Ca alloy after creep deformation10.1016/j.msea.2009.07.001 ↗
23. The effect of cooling rates on the refinement of microstructure and the nanoscale indentation creep behavior of Mg–Al–Ca alloy10.1016/j.msea.2009.01.068 ↗
24. On the observation of a new ternary MgSiCa phase in Mg-Si alloys10.1007/s11661-998-0099-9 ↗
25. Formation of CaMgSi at Ca2Si/Mg2Si interface10.1016/S0169-4332(03)00471-9 ↗
26. Preparation and solidification features of AS21 magnesium alloy10.1016/S0921-5093(00)01352-6 ↗
27. Metallurgy, design data, applications
28. Microstructure and mechanical characterization of cast Mg-Ca-Si alloys10.1016/j.jallcom.2016.10.059 ↗
29. Experimental study of ternary Ca–Mg–Si phase equilibria and thermodynamic assessment of Ca–Si and Ca–Mg–Si systems10.1016/j.intermet.2003.07.001 ↗
30. Effect of Ce on microstructure, mechanical properties and corrosion behavior of high-pressure die-cast Mg–4Al-based alloy10.1016/j.jallcom.2010.09.185 ↗
31. Effect of Ca on microstructure and properties of Mg-Al-Si alloys
32. Microstructure and impression creep properties of Ca-containing AS31 magnesium alloy10.1007/s40195-016-0491-1 ↗
33. Creep and microstructure of magnesium-aluminum-calcium based alloys10.1007/s11661-002-0118-1 ↗
34. Structure and transition of eutectic (Mg,Al)2Ca Laves phase in a die-cast Mg–Al–Ca base alloy10.1016/j.scriptamat.2004.07.011 ↗
35. Characterization of Al–Mn particles in AZ91D investment castings10.1016/j.matchar.2006.10.010 ↗
36. Villars · 1991 · vol. 1
37. Creep resistant magnesium diecasting alloys based on alkaline earth elements
38. Neutronenbeugungsuntersuchung der. Atomverteilung von Mg17Al1210.1007/BF00600053 ↗
39. Grain refinement of magnesium alloys10.1007/s11661-005-0030-6 ↗
40. Understanding effects of microstructural inhomogeneity on creep response – new approaches to improve the creep resistance in magnesium alloys10.1016/j.jma.2014.03.003 ↗
41. Effect of intermetallic phases on the creep behavior of AZ91 magnesium alloy10.1016/j.msea.2009.10.008 ↗
42. Grain boundary strengthening in strongly textured magnesium produced by hot rolling10.1007/BF02648393 ↗
43. The cleavage strength of polycrystals
44. Predicting the flow stress of high pressure die cast magnesium alloys10.1016/j.jallcom.2014.03.043 ↗
45. Dislocation binding as an origin for the improvement of room temperature ductility in Mg alloys10.1016/j.msea.2018.01.010 ↗
46. Constitutive equations in creep of Mg–Al alloys10.1016/j.msea.2008.03.007 ↗
47. Microstructural analysis of the creep resistance of die-cast Mg–4Al–2RE alloy10.1016/j.scriptamat.2007.10.041 ↗