The sensitivity of the microstructure and properties to the peak temperature in an ultrafast heat treated low carbon-steel
Source abstract
Abstract
In this work, we investigate the sensitivity of the microstructure and mechanical properties of an ultrafast heat treated low carbon-steel to the peak temperature. In all studied cases, the steel was heated within the intercritical temperature range (i.e. between the AC1 and AC3 temperatures). Both the peak temperature and soaking time were varied, and their effect on the size, the fraction of individual microstructural constituents and their tensile mechanical response were investigated. It is shown that the increasing peak temperature and soaking time promote austenite formation and recrystallization processes in the ferritic matrix. The highest nanohardness is shown by martensitic grains, while recovered ferrite demonstrated slightly higher nanohardness compared to recrystallized ferrite. The applied heat treatment parameters have strong effect on the nanohardness of martensite, whereas nanohardness of ferrite microconstituents is not sensitive to variation of the peak temperature and soaking time. The non-recrystallized ferrite is harder than its recrystallized counterpart due to the higher dislocation density of the former. Increasing peak temperatures promote strengthening in the material at the expense of its ductility mainly due to increased martensite fraction. The steel demonstrates enhanced strain hardening ability independently of the peak temperature. Analysis of the experimental results showed that the industrial processing window of +- 10 oC may lead to some heterogeneity of the local microstructure in the ultrafast heat treated sheets. However, the latter should not have any negative effect on the overall mechanical behavior of the ultrafast heat treated steel sheets on the macro-scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Fonstein · 2015
2. Advanced high strength steels for automotive industry10.3989/revmetalm.1158 ↗
3. steel Organization
4. Recrystallization and austenite formation in a cold rolled TRIP steel during ultra fast heating
5. Development of rapid heating and cooling (flash processing) process to produce advanced high strength steel microstructures10.1179/174328409X433813 ↗
6. Texture formation in high strength low alloy steel reheated with ultrafast heating rates
7. Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating10.1016/j.matdes.2016.12.009 ↗
8. Identification of the parameters controlling the grain refinement of ultra-rapidly annealed low carbon Al-killed steels10.1016/j.msea.2010.05.024 ↗
9. Ultra-rapid intercritical annealing to improve deep drawability of low-carbon, al-killed steels10.1007/s11661-012-1096-6 ↗
10. The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating10.1016/j.matchar.2017.06.010 ↗
11. Non-isothermal phase-transformation kinetics model for evaluating the austenization of 55CrMo steel based on Johnson – Mehl – Avrami equation10.1016/j.matdes.2015.12.110 ↗
12. Experimental characterisation of the effects of thermal conditions on austenite formation for hot stamping of boron steel10.1016/j.jmatprotec.2015.12.008 ↗
13. Effect of ultrafast heating on the properties of the microconstituents in a low-carbon steel10.1007/s11661-018-4658-4 ↗
14. Recrystallization kinetics of low and ultra low carbon steels during high-rate annealing10.2355/isijinternational.41.1053 ↗
15. Influence of heating rate on anisothermal recrystallization in low and ultra-low carbon steels10.1016/S0921-5093(00)01882-7 ↗
16. Microstructure, texture and mechanical properties in a low carbon steel after ultrafast heating10.1016/j.msea.2016.06.056 ↗
17. Puype · 2014
18. Fine microstructure formation in steel under ultrafast heating10.1038/s41598-019-47668-6 ↗
19. Microstructures and hardness of as-quenched martensites (0.1–0.5%C)10.1016/j.actamat.2011.05.061 ↗
20. Vercruysse · 2016
21. High-efficiency fast-heating annealing of a cold-rolled dual-phase steel10.1016/j.matdes.2014.01.055 ↗
22. Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications10.1016/j.msea.2019.05.043 ↗
23. In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation10.1016/j.msea.2019.04.098 ↗
24. A model of isothermal and non isothermal transformation kinetics of bainite in 0.5 % C steels10.2355/isijinternational.42.1010 ↗
25. Advanced high-strength steels: electron backscatter diffraction (EBSD)
26. An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel – chromium alloy (800H) during hot deformation10.1016/j.msea.2013.07.037 ↗
27. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
28. Austenite formation during intercritical annealing10.1007/s11661-004-0173-x ↗
29. Effect of heating rate on the austenite formation in low-carbon high-strength steels annealed in the intercritical region10.1007/s11661-011-0753-5 ↗
30. Austenite formation in plain low-carbon steels10.1007/s11661-010-0551-5 ↗
31. Effect of heating rate on ferrite recrystallization and austenite formation of cold-roll dual phase steel10.1016/j.jallcom.2013.05.226 ↗
32. Influence of heating rate on anisothermal recrystallization in low and ultra-low carbon steels10.1016/S0921-5093(00)01882-7 ↗
33. Effect of heating rate on nucleation and growth of austenite in cold rolled dual phase steel10.1179/1743281214Y.0000000228 ↗
34. The effect of heating rate on the recrystallization behavior in cold rolled ultra low carbon steel
35. The effect of soaking time after ultrafast heating on the microstructure and mechanical behavior of a low carbon steel10.1016/j.msea.2019.138276 ↗
36. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
37. Geometrically necessary boundaries , incidental dislocation boundaries and geometrically necessary dislocations10.1016/S1359-6462(02)00358-5 ↗
38. Stretching the mechanical properties in a 590 MPa ferrite-martensite dual-phase steel through rapid heating10.1051/metal/2017038 ↗
39. Correlations between nanoindentation hardness and macroscopic mechanical properties in DP980 steels10.1016/j.msea.2013.12.084 ↗
40. Bhadeshia · 2006
41. On the measurement of the nanohardness of the constitutive phases of TRIP-assisted multiphase steels10.1016/S0921-5093(01)01689-6 ↗
42. Nanoindentation study of ferrite-martensite dual phase steels developed by a new thermomechanical processing10.1016/j.msea.2015.04.098 ↗
43. Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering10.1016/j.msea.2017.03.017 ↗
44. The effect of ferrite grain size and martensite volume fraction on the tensile properties of dual phase steel10.1016/0001-6160(85)90114-2 ↗
45. Effect of martensite plasticity on the deformation behavior of a low-carbon dual-phase steel10.1007/s11661-006-9023-3 ↗
46. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
47. Effect of martensite strength on the tensile strength of dual phase steels10.1007/BF02385411 ↗
48. Influence of martensite volume fraction and cooling rate on the properties of thermomechanically processed dual phase steel10.1016/j.msea.2012.01.010 ↗
49. Effect of heat treatment on the properties and structure of molybdenum and vanadium dual-phase Steels10.1007/BF02643562 ↗
50. Influence of martensite composition and content on the properties of dual phase steels10.1007/BF02659924 ↗
51. Dieter · 1986
52. Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels10.1007/s11661-006-0213-9 ↗
53. A theoretical model for the flow behavior of commercial dual-phase steels containing metastable retained austenite: Part I. derivation of flow curve equations10.1007/BF02662402 ↗