journal article·2019-11Open access

Copper precipitation at engine operating temperatures in powder-forged connecting rods manufactured with Fe–Cu–C alloys

Edmond Ilia, Philippe Plamondon, Jean-Philippe Masse, Gilles L'Espérance

Abstract

The effect of copper precipitation on the mechanical properties of Fe–Cu–C alloys prepared for Powder Metallurgy and used to manufacture connecting rods for the automotive industry through powder forging was evaluated at engine operating temperatures, ranging between 100 °C and 150 °C. Tensile tests were conducted at room temperature as well as at 120 °C and 150 °C on specimens machined from connecting rods. The test results clearly indicated an improvement in the strength of Fe–Cu–C alloys at 120 °C and 150 °C. Scanning and transmission electron microscopies were employed to investigate the strengthening mechanism causing the improvement. The microscopy investigations pointed to stress-induced second phase precipitation strengthening in super-saturated Fe–Cu–C alloys even at these relatively low temperature levels as copious Cu nano precipitates were observed in the specimens submitted to tensile testing at 120 °C and components submitted to engine dynamometer testing. Clear evidence of interactions between dislocations and copper precipitates was found in both tensile specimens and components.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. ASM Handbook, ASM International, Materials Park, 1, 2005, p. 699.
2. Effects of copper content on microstructure and mechanical properties of powder-forged rod Fe-C-Cu alloys manufactured at elevated temperature10.1016/j.msea.2018.11.082 ↗
3. Interaction between dislocation and copper particles in Fe–Cu alloys10.2355/isijinternational.42.1541 ↗
4. The effect of heat treatment on sintered Fe-Cu alloys
5. Bernier · 2011 · 9-142
6. Ilia · 2007 · 10-18
7. Ilia · 2012
8. The effect of copper precipitation on mechanical properties at operating temperature of the materials used to manufacture powder forged connecting rods
9. Ilia · 2015
10. Stone · 1999 · 453
11. Wang · 2008 · 4
12. Theoretical models in the study of temperature effect on steel mechanical properties. Buletinul institutului politehnic din lasi, tomul V11 (VIV)
13. Behavior of high strength structural steel at elevated temperatures10.1061/(ASCE)0733-9445(2006)132:12(1948) ↗
14. Annual Book of ASTM Standards. Vol. 03.01, ASTM International, West Conshohocken, PA (2016), pp. 69 - 98 and 178 - 185.
15. 2016 · 2
16. Influence of Stresses on Precipitation