journal article·2019-09Open access

Investigation on the enhanced maximum strain rate sensitivity (m) superplasticity of Mg-9Li-1Al alloy by a two-step deformation method

H.P. Yang, X. Zhang, P. Chen, M.W. Fu, G.C. Wang, S. To

Abstract

Abstract A two-step superplastic deformation (SPD) approach was employed for the SPD of Mg-9Li-1Al (LA91) alloy. In the first SPD step, the constant velocity (Constv) or constant strain rate (CSR) SPD was adopted with the outcome elongation ranging from 50 to 250%. The maximum strain rate sensitivity (Maxm) SPD, in which the maximum m value is always maintained, was then employed in the second SPD step. The results show that the two-step SPD can greatly enhance the superplasticity of LA91 alloy. The largest elongation of 621.1% was obtained by CSR-Maxm SPD with the pre-elongation of 250%, which is even better than the results of single-step Maxm SPD by using grain-refined materials. In addition, the mechanisms of the two-step SPD are discussed and an in-depth understanding of the SPD of LA91 alloy is obtained. This research thus provides a feasible method for efficiently enhancing the plasticity of Mg-Li based alloys for making complex parts and structures with complicated local and multi-scaled features.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg–Li–(Al)–(RE) alloys for future cardiovascular stent application10.1016/j.actbio.2013.01.032 ↗
2. Hypersensitivity cases associated with drug-eluting coronary stents: a review of available cases from the Research on Adverse Drug Events and Reports (RADAR) project10.1016/j.jacc.2005.07.071 ↗
3. Microstructure and properties of Mg–8Li–1Al–1Ce alloy10.1016/j.matlet.2007.10.017 ↗
4. Corrosion behaviors of Mg and its alloys with different Al contents in a modified simulated body fluid10.1016/j.jallcom.2009.08.147 ↗
5. Hauser · 1956
6. Poerschke · 2009
7. Superplasticity in ultrafine-grained materials10.1515/rams-2018-0019 ↗
8. Improving the superplastic properties of a two-phase Mg–8% Li alloy through processing by ECAP10.1016/j.msea.2005.08.143 ↗
9. Low temperature superplasticity of ECAE processed Mg-10% Li-1% Zn alloy10.2320/matertrans.43.2419 ↗
10. Superplasticity in Mg-Li-Zn alloys processed by high ratio extrusion10.1080/10426910701860954 ↗
11. Microstructural evolution and superplastic behavior in friction stir processed Mg-Li-Al-Zn alloy10.1007/s10853-013-7672-3 ↗
12. Deformation and microstructure evolution of a high strain rate superplastic Mg–Li–Zn alloy10.1016/j.jallcom.2011.07.081 ↗
13. Superplasticity at elevated temperature of a coarse-grained Mg–Li alloy10.1002/adem.201300302 ↗
14. Room-temperature superplasticity in an ultrafine-grained magnesium alloy10.1038/s41598-017-02846-2 ↗
15. Investigation on the maximum strain rate sensitivity (m) superplastic deformation of Mg-Li based alloy10.1016/j.matdes.2016.09.066 ↗
16. Maximum m superplasticity deformation for Ti–6Al–4V titanium alloy10.1016/j.jmatprotec.2007.04.059 ↗
17. Study on the maximum m superplasticity deformation of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy
18. Stepped superplasticity deformation-induced plastic enhancement of Ti–6Al–1.5Cr–2.5Mo–0.5Fe–0.3Si alloy10.1016/j.matdes.2011.09.048 ↗
19. Enhanced the superplasticity in Ti–6.5Al–2Zr–1Mo–1V alloy by a two-step deformation method10.1016/j.matdes.2011.09.025 ↗
20. Superplastic behaviour and microstructural evolution in stepped tensile deformation of titanium alloy10.1007/s11665-013-0739-0 ↗
21. Fu · 2018 · 103
22. Kassner · 2015
23. Zhang · 2010
24. Rollett · 2008