journal article·2019-08Open access

Compressive deformation behavior of dendritic Mg–Ca(–Zn) alloys at high temperature

Justine Papillon, Paul Salero, Florian Mercier, Damien Fabrègue, Éric Maire

Abstract

Abstract Mg-Ca(-Zn) alloys were subjected to hot compression at temperatures ranging from 350 ∘C to 450 ∘C and strain rates of 10−3 to 10 s−1. In the corresponding flow curves, the peak stress appeared at very low strain rates (less than 0.05) followed by steady state at a constant stress, indicating the occurrence of dynamic flow softening, which is a typical signature of dynamic recrystallization (DRX). The DRX was greatly affected by the deformation conditions and Ca/Zn contents, and optical and scanning electron microscopy analysis revealed that the DRX induced rearrangement of the complex dendritic microstructure during compression. Optimal parameters for the deformation were identified. These indicate deformation conditions where the processing is safe and easy. This in turn is likely to enable widening of the range of applications of Mg-Ca(-Zn) alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Dynamic recrystallization behavior of AZ61 Magnesium alloy
2. Structural and mechanical characteristics of Mg–4Zn and Mg–4Zn–0.4Ca alloys after different thermal and mechanical processing routes10.1016/j.msea.2013.08.008 ↗
3. Compressive deformation behavior of Mg–Zn–Ca alloy at elevated temperature10.1016/j.msea.2013.08.024 ↗
4. Effect of Ca-addition on dynamic recrystallization of Mg–Zn alloy during hot deformation10.1016/j.msea.2013.05.054 ↗
5. Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application10.1016/j.msea.2008.06.019 ↗
6. Dynamic recrystallization in AZ31 magnesium alloy10.1016/j.msea.2006.11.095 ↗
7. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
8. Dynamic continuous recrystallization characteristics in two stage deformation of Mg - 3Al - 1Zn alloy sheet10.1016/S0921-5093(02)00096-5 ↗
9. Effects of dynamic recrystallization in extruded and compressed AZ31 magnesium alloy
10. A flow stress model for AZ61 magnesium alloy
11. Strain softening and hardening behavior in AZ61 magnesium alloy
12. Modeling of high temperature rheological behavior of AZ61 Mg-alloy using inverse method and ANN10.1016/j.matdes.2008.03.027 ↗
13. Dynamic recrystallization and texture development during hot deformation of magnesium alloy AZ3110.1016/S1003-6326(08)60228-9 ↗
14. Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures10.1016/S1359-6454(01)00008-8 ↗
15. Microstructural evolution and superplasticity of rolled Mg-9Al-1Zn10.1016/S0921-5093(00)00959-X ↗
16. High strain rate superplasticity of rolled AZ91 magnesium alloy10.1016/S1001-0521(08)60028-5 ↗
17. Superplasticity in a magnesium alloy subjected to isothermal rolling10.1016/j.scriptamat.2004.04.005 ↗
18. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
19. In situ study of dynamic recrystallization and hot deformation behavior of a multiphase titanium aluminide alloy10.1063/1.3266177 ↗
20. Effect of particle distribution on deformation and damage of two-phase alloys10.1016/S0921-5093(01)01168-6 ↗
21. Biodegradable orthopedic magnesium-calcium (MgCa) alloys, processing, and corrosion performance10.3390/ma5010135 ↗
22. Salero · 2015
23. Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography10.1016/j.jeurceramsoc.2006.05.097 ↗
24. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗