Microstructural evolution and failure mechanism of an extrusion welded aluminum alloy tube during hydroforming processing
Source abstract
Abstract
Abstract During hydroforming of Al alloys, cracking often limits the production of specific frames for next-generation transportation vehicles. In this study, microstructural evolution and cracking behavior of an extrusion welded aluminum alloy blank tube were characterized to uncover the failure mechanisms during hydroforming process. Electron back-scattered diffraction, transmission electron microscope, and scanning electron microscope were employed to characterize the grains, textures, and local micro-crack sites. Experimental results demonstrated that grains in the welds region were significantly larger than those in the neighboring regions. Along the weld region, large grains typically with high-misorientation with respect to neighboring grains were identified as the preferred crack nucleation sites. Plastic incompatibility due to preferential yielding in the larger (softer) grains as compared to the surrounding finer (harder) grains is postulated as the origin for local strain localization that leads to cracking in the weld regions during hydroforming.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Effect of vanadium on the microstructures and mechanical properties of an Al-Mg-Si-Cu-Cr-Ti alloy of 6XXX series10.1016/j.jallcom.2013.03.239 ↗
2. Grain boundary precipitation induced by grain crystallographic misorientations in an extruded Al-Mg-Si-Cu alloy10.1016/j.jallcom.2014.10.206 ↗
3. Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys10.1186/s40712-015-0053-8 ↗
4. Extrusion welding in aluminum extrusion10.1504/IJMPT.2002.001317 ↗
5. Akeret · 1992 · vol. 1 · 219
6. GJERSTAD · 1999
7. Weld quality in extruded aluminum hollow sections
8. Experimental and numerical study on mechanical properties of aluminum alloy under uniaxial tensile test
9. Mechanical properties and microstructural characterization of extrusion welds in AA6082-T410.1023/B:JMSC.0000044896.46771.ba ↗
10. On the mechanics of localized necking in anisotropic sheet metals10.1016/S0022-5096(01)00031-X ↗
11. Numerical analysis and design for tube hydroforming process by rigid-plastic finite element method
12. An experimental and numerical study of necking initiation in aluminum alloy tubes during hydroforming10.1016/j.ijmecsci.2004.11.007 ↗
13. Failure analysis of tubular hydroforming10.1115/1.1394966 ↗
14. Effect of triggering on the energy absorption capacity of axially compressed aluminum tubes10.1016/S0261-3069(98)00043-0 ↗
15. Wrinkling analysis for forming limit of tube bending processes10.1016/j.jmatprotec.2004.04.410 ↗
16. Buckling behaviors of section aluminum alloy columns under axial compression10.1016/j.engstruct.2015.03.064 ↗
17. Influence of hydrostatic extrusion parameters on the microstructure and mechanical properties of 6082 aluminum alloy10.4028/www.scientific.net/SSP.140.197 ↗
18. Microstructure and texture evolution of bcc and fcc metals subjected to equal channel angular extrusion10.1016/j.msea.2005.09.065 ↗
19. Grain size effects on plastic strain and dislocation density tensor fields in metal polycrystals10.1016/j.commatsci.2011.02.043 ↗
20. Micro-macro modelling of the effects of the grain size distribution on the plastic flow stress of heterogeneous materials10.1016/j.commatsci.2006.02.019 ↗
21. On the influence of the grain boundary misorientation on the plastic deformation of aluminum bicrystals10.1016/S1359-6454(03)00259-3 ↗
22. Direct observation of individual dislocation interaction processes with grain boundaries10.1126/sciadv.1501926 ↗
23. Engler · 2010