Thermal activation based constitutive model for high-temperature dynamic deformation of AZ31B magnesium alloy
Source abstract
Abstract
Abstract Based on the existing experimental results of dynamic deformation at room temperature [1], a high-temperature dynamic test and a few supplementary microstructure observations by using an optical microscope were performed. Based on these experimental results, a thermal-activation-based dynamic constitutive model was proposed to describe the temperature-dependent dynamic deformation of an extruded AZ31B magnesium alloy. In the proposed model, both dislocation slipping and twinning were taken as shear movements with fixed shear planes and directions but with different thermodynamic features. Then, the total flow stress was divided into two parts, i.e., non-thermally and thermally activated ones. In addition, the effects of applied strain, strain rate, and temperature on the dynamic deformation of the extruded AZ31B magnesium alloy were incorporated into the proposed constitutive model. It is demonstrated that the flow stresses predicted by the proposed model show good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Crystal plasticity-based impact dynamic constitutive model of magnesium alloy10.1016/j.ijmecsci.2016.10.012 ↗
2. Current wrought magnesium alloys: strengths and weaknesses10.1007/s11837-005-0095-0 ↗
3. Microstructure and corrosion behavior of AZ31 alloys prepared by dual directional extrusion10.1016/j.matdes.2011.12.023 ↗
4. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
5. Steinberg · 1973
6. Dislocation-mechanics-based constitutive relations for material dynamics calculations10.1063/1.338024 ↗
7. Microstructural based models for bcc and fcc metals with temperature and strain rate dependency10.1016/j.mechmat.2004.02.003 ↗
8. A consistent modified Zerilli-Armstrong flow stress model for BCC and FCC metals for elevated temperatures10.1007/s00707-004-0203-1 ↗
9. Constitutive modeling of Ti-6Al-4V at a wide range of temperatures and strain rates10.1016/j.euromechsol.2017.01.005 ↗
10. Dynamic plasticity of AZ31 magnesium alloy: experimental investigation and constitutive modeling10.1016/j.msea.2014.06.112 ↗
11. A new strain rate dependent continuum framework for Mg alloys10.1016/j.commatsci.2015.12.046 ↗
12. I. Ulacia, S. Yi, M.T. Pérez-Prado, N.V. Dudamell, F. Gálvez, D. Letzig, I. Hurtado, Texture Evolution of AZ31 Magnesium Alloy Sheet at High Strain Rates. Proceedings of the 4th International Conference on High Speed Forming, 2010.
13. Mechanical responses and deformation mechanisms of an AZ31 Mg alloy sheet under dynamic and simple shear deformations10.1016/j.ijplas.2014.12.001 ↗
14. Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions10.1016/j.ijplas.2014.10.012 ↗
15. Constitutive equations and flow behavior of an as-extruded AZ31 magnesium alloy under large strain condition10.1007/s11665-016-2092-6 ↗
16. Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress–strain data10.1016/j.msea.2011.07.064 ↗
17. Model of plastic deformation for extreme loading conditions10.1063/1.1524706 ↗
18. Dislocation dynamics based dynamic constitutive model of magnesium alloy10.1007/s00707-016-1784-1 ↗
19. Plastic flow characteristics and physical conception constitutive relation for AZ31 cast magnesium ally
20. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials10.1016/j.actamat.2006.11.017 ↗
21. Twinning effects in a rod-textured AM30 Magnesium alloy10.1016/j.ijplas.2011.08.001 ↗
22. Assessment of constitutive equations used in machining10.4028/www.scientific.net/KEM.274-276.277 ↗
23. Kocks · 1975
24. Yan · 2011
25. Vibration analysis of axisymmetric functionally graded viscothermoelastic spheres10.1007/s10409-014-0016-y ↗
26. Determination of temperature rise during high strain rate deformation10.1016/S0167-6636(97)00036-7 ↗
27. Guo · 2007
28. Kennedy · 1999 · 303