Microstructural and mechanical properties of α-titanium sintered material via thermal decomposition of additive chromium oxide particles
Source abstract
Abstract
Abstract The pre-mixed pure Ti and Cr2O3 powder was consolidated by spark plasma sintering (SPS) and hot extrusion to fabricate α-titanium (Ti) materials with oxygen (O) and chromium (Cr) elements by powder metallurgy (PM) process. The Cr2O3 particles were completely decomposed during SPS, and then O and Cr atoms were dissolved in α-Ti matrix. Oxygen atoms were remarkably improved the mechanical strength of PM Ti-O-Cr alloys by their solid solution hardening effect. The Cr solution and Ti4Cr precipitates had important roles to obstruct the grains coarsening behavior by the solute drag and Zener pinning effects, respectively. The solid solution strengthening effect by Cr atoms, however, was very limited due to a small Cr solubility of about 0.35 at% in α-Ti phase of Ti-O-Cr alloys. Since Ti4Cr precipitates with 10–20 µm diameters were not so fine, they hardly contributed to the precipitation hardening of Ti-O-Cr alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. 1928
2. 1982
3. 2003
4. Managing the scarcity of chemical elements10.1038/nmat2969 ↗
5. Characteristics of powder metallurgy pure titanium matrix composite reinforced with multi-wall carbon nanotubes10.1016/j.compscitech.2009.01.026 ↗
6. Powder metallurgy titanium metal matrix composites reinforced with carbon nanotubes and graphite10.1016/j.compositesa.2012.12.005 ↗
7. Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods10.1016/j.msea.2012.11.058 ↗
8. Microstructure and mechanical properties of CP-Ti fabricated via powder metallurgy with non-uniformly dispersed impurity solutes10.1016/j.msea.2018.01.031 ↗
9. Experimental and theoretical analysis of nitrogen solid-solution strengthening of PM titanium
10. Strengthening behaviour and mechanisms of extruded powder metallurgy pure Ti materials reinforced with ubiquitous light elements10.1080/00325899.2016.1148847 ↗
11. Strengthening-toughening mechanism study of powder metallurgy Ti-Si alloy by interrupted in-situ tensile tests10.1016/j.jallcom.2016.09.319 ↗
12. Study of twinning behavior of powder metallurgy Ti-Si alloy by interrupted in-situ tensile tests10.1016/j.msea.2016.10.070 ↗
13. 1987
14. 2013
15. 1973
16. W.L. Bragg, The Diffraction of Short Electromagnetic Waves by a Crystal, Proceedings of the Cambridge Philosophical Society, 17, 1912, pp. 43–57.
17. Effect of interstitial solutes on the strength and ductility of titanium10.1016/0079-6425(81)90001-3 ↗
18. Interstitial order-disorder transformation in the Ti-O solid solution. I. Ordered arrangement of oxygen10.1143/JPSJ.27.155 ↗
19. Fabrication and characterization of oxygen-diffused titanium for biomedical applications10.1016/j.actbio.2009.06.011 ↗
20. Microstructure and mechanical properties of a high nitrogen titanium alloy10.1016/j.msea.2007.08.074 ↗
21. The impurity-drag effect in grain boundary motion10.1016/0001-6160(62)90092-5 ↗
22. On the theory of impurity controlled grain boundary motion10.1016/0001-6160(71)90041-1 ↗
23. C. Zener, quoted by C. S. Smith, Grains, Phases, and interfaces: an interpretation of microstructure, Trans. AIME 175, 1948, pp. 15–51.
24. On the theory of normal and abnormal grain growth10.1016/0001-6160(65)90200-2 ↗
25. Consideration of Zener drag effect by introducing a limiting radius for neighbourhood in grain growth simulation10.1016/S0022-0248(02)01420-3 ↗
26. Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration10.1557/jmr.2017.338 ↗
27. Variation of hardness of metals with grain size10.1038/173948b0 ↗
28. Petch · J. Iron Steel Inst. · 1953 · 173 · 8
29. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
30. Quantitative analysis on solid solution strengthening by light elements in pure titanium sintered materials by using Labusch model10.2497/jjspm.65.407 ↗
31. 1987