Achieving continuous cold rolling of martensitic stainless steel via online induction heat treatment
Source abstract
Abstract
Abstract The continuous cold rolling of martensitic stainless steel (MSS) has not been achieved so far because of the poor weld toughness caused by the occurrence of the brittle martensite. How to improve the toughness of MSS weld is then one of the most concerned challenges in steel rolling industries. In this paper, the toughness of the MSS weld was increased to meet the rolling requirement by introducing the online induction heat treatment into laser-arc hybrid welding. The heat treatment parameters were optimized, which was the heating temperature of 650 °C and the holding time longer than 5 s. The weld toughness characterized by Erichsen cupping value was increased from 5.7 mm to 8.7 mm, while the bearable rolling reduction was increased from 25% to 75%. The microstructure-toughness-bearable rolling reduction relationship was established according the experimental results. The mechanism of the microstructure transformation was explained by the thermodynamic calculation of austenite stability, which is dominated by the diffusion behavior of alloying elements. The toughness improvement was discussed according to the microstructure transformation and the crack propagation behaviors, which is closely related to the austenite content and the martensite with high-angle misorientation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Experimental investigation on laser beam welding of martensitic stainless steels in a constrained overlap joint configuration10.1016/j.jmatprotec.2010.03.024 ↗
2. Experimental design approach to the process parameter optimization for laser welding of martensitic stainless steels in a constrained overlap configuration10.1016/j.optlastec.2010.06.006 ↗
3. Experimental investigation on seam geometry, microstructure evolution and microhardness profile of laser welded martensitic stainless steels10.1016/j.optlastec.2011.11.035 ↗
4. Problems and issues in laser-arc hybrid welding10.1179/174328009X411163 ↗
5. Weld microstructure and shape of laser-arc hybrid welding10.1179/174329307X249388 ↗
6. Hybrid fiber laser-arc welding of thick section high strength low alloy steel10.1016/j.matdes.2011.02.002 ↗
7. Influence of Ni coating on interfacial reactions and mechanical properties in laser welding-brazing of Mg/Ti butt joint10.1016/j.jallcom.2018.06.039 ↗
8. Achieving high strength joint of pure copper via laser-cold metal transfer arc hybrid welding10.1007/s11661-016-3497-4 ↗
9. Effect of heat input on weld microstructure and toughness of laser-arc hybrid welding of martensitic stainless steel10.1016/j.jmatprotec.2017.02.007 ↗
10. Effect of Ni content on rolling toughness of laser-arc hybrid welded martensitic stainless steel10.1016/j.jmatprotec.2017.08.029 ↗
11. The effect of preheat & post weld heat treatment on the laser weldability of AISI 420 martensitic stainless steel10.1016/j.matdes.2014.07.044 ↗
12. Characteristics and effects of austenite resulting from tempering of 13Cr-NiMo martensitic steel weld metals10.1016/S1044-5803(00)00099-1 ↗
13. Toughness and microstructure of 13Cr4NiMo high-strength steel welds10.1361/105994900770345458 ↗
14. Influence of post-weld heat treatments on microstructure and mechanical properties of AISI 431 martensitic stainless steel friction welds10.1179/174328407X179773 ↗
15. Improving 410NiMo weld metal toughness by PWHT10.1016/j.jmatprotec.2011.06.024 ↗
16. Influence of austenitizing temperature on microstructure and mechanical properties of AISI 431 martensitic stainless steel electron beam welds10.1016/j.matdes.2008.07.042 ↗
17. Microstructure and mechanical properties of laser-arc hybrid welding joint of GH909 alloy10.1016/j.optlastec.2015.12.020 ↗
18. Influence of PWHT on toughness of high chromium and nickel containing martensitic stainless steel weld metals10.1007/s11661-015-2847-y ↗
19. Effect of grain boundary character distribution on the impact toughness of 410NiMo weld metal10.1007/s11661-016-3481-z ↗
20. Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel10.1016/j.msea.2011.09.017 ↗
21. Strengthening mechanism in micro-polycrystals with penetrable grain boundaries by discrete dislocation dynamics simulation and Hall-Petch effect10.1016/j.commatsci.2009.05.021 ↗
22. The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steels10.1016/j.msea.2011.01.078 ↗
23. Precipitation behaviors and strengthening of carbides in H13 steel during annealing10.2320/matertrans.M2014452 ↗
24. Formation of the reversed austenite during intercritical tempering in a Fe-13%Cr-4%Ni-Mo martensitic stainless steel10.1016/j.matlet.2010.03.021 ↗
25. Effect of heat treatment on microstructure and property of Cr13 super martensitic stainless steel10.1016/S1006-706X(11)60118-0 ↗
26. Martensite shear phase reversion-induced nanograined/ultrafine-grained Fe-16Cr-10Ni alloy: the effect of interstitial alloying elements and degree of austenite stability on phase reversion10.1016/j.msea.2010.08.051 ↗
27. of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe-13%Cr-7%Ni-3%Si martensitic stainless steel10.1016/S1359-6462(01)01093-4 ↗
28. Microstructure evolution and precipitation behavior of 0Cr16Ni5Mo martensitic stainless steel during tempering process10.1016/S1006-706X(16)30063-2 ↗
29. A study on aging dynamics of maraging stainless steel 00Cr13Ni7Mo4W2Ti
30. Austenite-to-ferrite phase transformation in low-alloyed steels10.1016/j.commatsci.2004.09.031 ↗
31. Microstructure and properties of 13Cr5Ni1Mo0.025Nb0.09V0.06N super martensitic stainless steel10.1016/j.msea.2012.01.093 ↗
32. The determining role of reversed austenite in enhancing toughness of a novel ultra-low carbon medium manganese high strength steel10.1016/j.scriptamat.2015.04.009 ↗