journal article·2018-10

Cold rolling and intercritical annealing of C-Mn steel sheets with different initial microstructures

Y. Karimi, S. Hossein Nedjad, H. Shirazi, M. Nili Ahmadabadi, H. Hamed Zargari, K. Ito

Publisher page

Abstract

Abstract The microstructure and mechanical properties of cold-rolled dual-phase steels produced from different initial microstructures, i.e., complex ferrite-pearlite, martensite, and bainite, were studied for a C-Mn steel contained 0.15 C, 2.50Mn, and 0.30Si (wt%). Sheets of 4 mm thickness, and with the different initial microstructures were cold rolled for 50% thickness reduction, intercritically annealed at 710 and 740 °C for various times (10–1800 s) in a salt bath, and then water cooled. Different amounts and distributions of martensite were produced from the different initial microstructures by the same annealing treatment. Bainite was the overwhelming initial microstructure, which produced slightly higher amounts of martensite and the net-arrayed martensite distribution. Electron backscattering diffraction revealed recrystallization of cold-rolled bainite before austenite formation at 710 °C; and that the ferrite bound near martensite has remarkable transformation induced effects. Tensile strength and ductility of the steels annealed for 1200 s at 710 °C were almost the same. The effect of the initial microstructure on the tensile properties is remarkable for steels annealed for the same time at 740 °C. The net-arrayed martensite produced by using bainite represented higher initial strain hardening at both temperatures, which is attributed to the transformation effects in the ferrite bound around martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. World Auto Steel, 2018. 〈www.worldautosteel.org/projects〉.
2. Fonstein · 2015
3. Rana · 2017
4. Thermomechanical processing of advanced high strength steels10.1016/j.pmatsci.2018.01.006 ↗
5. Influence of martensite composition and content on the properties of dual phase steels10.1007/BF02659924 ↗
6. Deformation characteristics of dual-phase steels10.1007/BF02642418 ↗
7. The effect of ferrite grain size and martensite volume fraction on the tensile properties of dual phase steel10.1016/0001-6160(85)90114-2 ↗
8. Influence of bainite/martensite-content on the tensile properties of low carbon dual-phase steels10.1016/j.msea.2007.05.007 ↗
9. Effects of morphology on the mechanical behavior of a dual phase Fe-2Si-0.1C steel10.1007/BF02648546 ↗
10. The development of some dual-phase steel structures from different starting microstructures10.1007/BF02814228 ↗
11. The influence of starting microstructure on the retention and mechanical stability of austenite in an intercritically annealed-low alloy dual-phase steel10.1007/BF02646215 ↗
12. Effect of morphology of second-phase martensite on tensile properties of Fe-0.1C dual phase steels10.1007/BF00580148 ↗
13. Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels10.1007/s11661-999-0269-4 ↗
14. Effects of martensite morphology and tempering on dynamic deformation behavior of dual-phase steels10.1007/s11661-006-0217-5 ↗
15. Effect of martensite plasticity on the deformation behavior of a low-carbon dual-phase steel10.1007/s11661-006-9023-3 ↗
16. Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel10.1007/s10853-009-3392-0 ↗
17. Effect of martensite distribution on damage behavior in DP600 dual phase steels10.1016/j.msea.2009.03.055 ↗
18. Effect of pre-IC annealing treatments on the final microstructure and work hardening behavior of a dual-phase steel10.1016/j.msea.2013.11.034 ↗
19. The influence of microstructure and composition on the plastic behaviour of dual-phase steels10.1016/j.actamat.2014.04.015 ↗
20. Microstructures, mechanical properties, and strain hardening behavior of an ultrahigh strength dual phase steel developed by intercritical annealing of cold-Rolled ferrite-martensite10.1007/s11661-015-2918-0 ↗
21. The Impact of thermo-mechanical controlled processing on structure-property relationship and strain hardening behavior in dual-phase steels10.1016/j.msea.2016.03.055 ↗
22. Morphology and distribution of martensite in dual phase (DP980) steel and its relation to the multiscale mechanical behavior10.1016/j.msea.2016.02.048 ↗
23. Unraveling the initial microstructure effects on mechanical properties and work-hardening capacity of dual-phase steel10.1007/s11661-017-4246-z ↗
24. Processing of thin sheet multiphase steel grades10.1002/srin.200705883 ↗
25. Advanced cold rolled steels for automotive applications
26. Processing opportunities for new advanced high-strength sheet steels10.1080/10426910903158272 ↗
27. Austenite formation during intercritical annealing10.1007/s11661-004-0173-x ↗
28. Microstructures resulting from the interaction between ferrite recrystallization and austenite formation in dual-phase steels10.1007/s10853-014-8596-2 ↗
29. Microstructure and texture evolution in dual-phase steels: competition between recovery, recrystallization, and phase transformation10.1016/j.msea.2010.03.028 ↗
30. Effect of heating rate on ferrite recrystallization and austenite formation of cold-roll dual phase steel10.1016/j.jallcom.2013.05.226 ↗
31. Influence of heating rate on ferrite recrystallization and austenite formation in cold-rolled microalloyed dual-phase steels10.1007/s11661-017-4407-0 ↗
32. Microstructure characterization of cold-rolled dual-phase steels10.1002/srin.200506051 ↗
33. Ferrite recrystallization and austenite formation in cold-rolled intercritically annealed steel10.1007/BF02658671 ↗
34. Austenitization during intercritical annealing of an Fe-C-Si-Mn dual-phase steel10.1007/BF02670328 ↗
35. Incomplete recrystallization and subsequent microstructural evolution during intercritical annealing in cold-rolled low carbon steels10.2355/isijinternational.50.469 ↗
36. Dual phase structure formed by partial reversion of cold-deformed martensite10.1016/j.msea.2012.06.001 ↗
37. The effect of the initial microstructure on recrystallization and austenite formation in a DP600 steel10.1007/s11661-013-1721-z ↗
38. Effect of hot band microstructure on strength and ductility of cold rolled dual-phase steel10.2355/isijinternational1966.27.360 ↗
39. Cold-rolling and intercritical annealing of low-carbon steel: effect of initial microstructure and heating rate10.1016/j.msea.2012.11.109 ↗
40. Grain refinement by cold deformation and recrystallization of bainite and acicular ferrite structures of C–Mn steels10.1016/j.msea.2010.10.064 ↗
41. Banding effects on the process of grain refinement by cold deformation and recrystallization of acicular C-Mn steel10.1016/j.msea.2017.05.006 ↗
42. Tensile deformation
43. Effect of starting microstructure on the grain refinement in cold-rolled low-carbon steel during annealing at two different heating rates10.1007/s11661-015-3248-y ↗
44. Modeling of the recrystallization and austenite formation overlapping in cold-rolled dual-phase steels during intercritical treatments10.1007/s11661-017-4231-6 ↗
45. On phase transformation induced effects controlling the initial flow behavior of ferritic-martensitic dual-phase steels10.1016/j.msea.2017.10.005 ↗
46. An unexpected feature of the stress–strain diagram of dual-phase steel10.1016/S0927-0256(02)00256-2 ↗