High-temperature internal friction and dynamic moduli in copper
Source abstract
Abstract
Abstract New measurements of dynamic shear and Young's moduli and their associated internal frictions were made with torsional and flexural forced-oscillation methods, respectively, on three polycrystalline specimens of pure copper. The tests spanned the 1–1000 s range of oscillation periods, at temperatures ranging from those of annealing close to the melting point (1050 °C) down to room temperature. A broad internal friction peak, found at temperatures around 700 °C (at 1 Hz) for samples annealed at 1050 °C, is superimposed on a monotonic relaxation background. Non-linear viscoelastic behaviour is observed above strains around 5 × 10 − 6 . The period- and temperature-dependence of both shear modulus and internal friction is adequately captured by an extended “background plus peak” Burgers model for viscoelastic rheology. Activation energies are found to be around 200 kJ mol−1 for both the high-temperature peak and monotonic damping background, consistent with common diffusional control of both the dissipation background and superimposed peak, plausibly involving stress-induced migration of dislocations. Complementary torsional microcreep tests at selected temperatures reveal that most of the inelastic strain is anelastic (viscous) for loading durations less (greater) than 1000 s. Such linear viscous deformation, observed at low stress in coarse-grained polycrystalline copper, involves much higher strain rates than expected from published rheology, plausibly attributable to the Harper-Dorn mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-pressure geophysics and materials · Geotechnical and Geomechanical Engineering · Electromagnetic Launch and Propulsion Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Experimental evidence of the viscous behaviour of grain boundaries in metals10.1103/PhysRev.71.533 ↗
2. Stress relaxation across grain boundaries in metals10.1103/PhysRev.72.41 ↗
3. Strain-amplitude dependent internal friction studies of dilute alloys of copper10.1063/1.1722474 ↗
4. Internal friction and grain boundary viscosity of copper and of binary copper solid solutions
5. Grain boundary damping I: pure iron10.1088/0370-1328/78/6/353 ↗
6. Use of the internal friction technique to measure rates of grain boundary sliding10.1016/0001-6160(74)90108-4 ↗
7. Apparatus for the measurement of internal friction as a function of frequency between 10−5 and 10 Hz10.1063/1.1134874 ↗
8. Mechanical dynamical spectroscopy in low-flux neutron irradiated pure copper
9. G. Ashmarin, M. Golubev, N. Naumova, A. Shalimova, Internal Friction and Attenuation in Solids, International Academic Publishers, Beijing, edited by T.-S. Kê, 1990.
10. High-temperature isothermal internal friction of copper and copper-aluminium solid solutions between 10−4 and 10 Hz10.1080/01418618108239415 ↗
11. Nowick · 1972
12. Schaller · 2001 · 366–36810.4028/b-N33BWo ↗
13. High temperature relaxation peaks in copper and aluminium10.1016/0001-6160(67)90384-7 ↗
14. On the high-temperature relaxation peak in f.c.c. metals10.1179/msc.1969.3.1.97 ↗
15. Résultats relatifs aux pics de frottement intérieur observés sur les métaux non alliés de structure cubique face centrée et cubique centrée au voisinage de 0,5Tf10.1016/0036-9748(75)90439-1 ↗
16. Mechanical dynamical spectroscopy in Cu-Li allows produced by electrodeposition10.1016/0921-5093(96)10178-7 ↗
17. Present state of the controversy about the grain boundary relaxation10.1007/BF02457391 ↗
18. Grain boundary relaxation in metals
19. High temperature damping
20. High temperature relaxation peaks in copper and gold10.1016/0001-6160(66)90209-4 ↗
21. High temperature internal friction and dislocation motion in poly and single crystals of f.c.c. metals10.1051/jphyscol:1981565 ↗
22. A grain boundary model and the mechanism of viscous intercrystalline slip10.1063/1.1698355 ↗
23. Experimental and theoretical aspect of the high temperature damping of pure metals10.1051/jphyscol:1981561 ↗
24. High-temperature relaxations10.1016/j.msea.2003.08.068 ↗
25. Low frequency techniques
26. A model of dislocation-controlled rheology for the mantle10.1098/rsta.1981.0025 ↗
27. The activation energy of high temperature internal friction10.1016/0001-6160(64)90141-5 ↗
28. Elastically accomodated grain-boundary sliding: new insights from experiment and modeling10.1016/j.pepi.2013.11.014 ↗
29. A high-pressure, high-temperature apparatus for studies of seismic wave dispersion and attenuation10.1007/BF00998339 ↗
30. Relaxation of the bulk modulus in partially molten dunite?10.1002/2016GL071004 ↗
31. Improved procedures for the laboratory study of high-temperature viscoelastic relaxation10.1016/j.pepi.2008.03.010 ↗
32. High-temperature viscoelastic relaxation in iron and its implications for the shear modulus and attenuation of the earth's inner core10.1029/2000JB900131 ↗
33. A versatile facility for laboratory studies of viscoelastic and poroelastic behaviour of rocks10.1063/1.3592154 ↗
34. Grain size-sensitive viscoelastic relaxation and seismic properties of polycrystalline MgO10.1002/2016JB013126 ↗
35. Grainsize-sensitive viscoelastic relaxation in olivine: towards a robust laboratory-based model for seismological application10.1016/j.pepi.2010.09.005 ↗
36. Internal friction and dynamic modulus of cold-worked metals10.1063/1.1721827 ↗
37. Frost · 1982
38. Grain-boundary relaxation in cu-au alloys10.1179/msc.1967.1.1.166 ↗
39. Internal friction at medium temperature in high purity aluminium and its relation with the microstructure - II10.1016/0001-6160(88)90138-1 ↗
40. Self-diffusion in copper at low temperatures10.1002/pssa.2210440220 ↗
41. Modèle pour les pics de frottement interne observés à haute température sur les monocristaux10.1080/14786437608221124 ↗