Compression with oscillatory torsion applied after solution treatment and aging treatment of CuCr0.6 alloy for grain refinement: Microstructure, mechanical and electrical properties
Source abstract
Abstract
Abstract Microstructure, mechanical properties and electrical conductivity of the CuCr0.6 alloy processed by compression with oscillatory torsion (COT) at room temperature were investigated. The COT processing was applied for the samples processed with the solution treatment followed by quenching into iced water at 1000 °C for 3 h and for the samples processed using the solution treatment followed by aging treatment at 500 °C for 2 h. Application of the solution and aging processes prior to the COT deformation results in the partial dissolution of Cr precipitates into the Cu matrix and precipitation of the coherent second phase precipitates, respectively. COT processing with different values of the total effective strain (eft) of 10, 20, 40 was introduced to the material. It was found that the presence of the second phase precipitates has a significant effect on the formation of the ultrafine grain (UFG) structure during the COT deformation. After the COT deformation with maximal effective strain value of eft = 40 of the samples processed by aging, the obtained grain size was about 300 nm and the high angle boundary fraction of about 30%. Application of the COT deformation at the effective strain value of eft = 40 for the samples after solid-solution treatment leads to the formation of a UFG microstructure with the average grain size of about 450 nm and the high angle boundary fraction of 13%. Formation of the more refined UFG structure and the presence the dispersed chromium precipitates in the samples after aging contributes to the enhanced ultimate tensile strength (UTS) of 521 MPa, with the electrical conductivity of 85% IACS, which are much higher than the corresponding values of solid-solution-treated samples prior to COT of 353 MPa and 40% IACS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Material effects during monotonic- cyclic loading10.1016/j.ijsolstr.2013.10.040 ↗
2. Tensile or compressive plastic deformation of cylinders assisted by cyclic torsion
3. KOBO-type forming: forging of metals under complex conditions of the process10.1016/S0924-0136(02)01033-6 ↗
4. Plastic flow of aluminium extruded, under complex conditions10.1179/026708300101508243 ↗
5. Influence of rolling process with induced strain path on aluminium structure and mechanical properties10.1016/j.acme.2012.10.008 ↗
6. Variations of mechanical parameters and strain energy dissipated during tension-torsion loading10.2478/v10172-012-0009-4 ↗
7. Analysis of power-energy effect for processes with forced deformation path
8. Material properties under drawing and extrusion with cyclic torsion10.1016/S0921-5093(00)01971-7 ↗
9. Refinement and control of the metal structure elements by plastic deformation10.1016/j.scriptamat.2004.06.020 ↗
10. F. Grosman, J. Pawlicki, The yield stress in the conditions of combined loadings. Materiały XII Konferencji KomPlasTech, Informatyka w Technologii Metali (Proceedings of XII Conference KomPlastTech, Informatics in Metal Technology) Ustroń, 253–258 [in Polish], 2005.
11. T. Szymczak, Z.L. Kowalewski, Analysis of tensile force variation due to application of cyclic torsion for a range of frequency levels, in: Proceedings of the 39th Solid Mechanics Conference Zakopane, Poland, September 1–5, P049, 2014.
12. Patent no. PL 203220 B1.
13. Microstructure characterization of Cu processed by compression with oscillatory torsion10.1016/j.matchar.2014.05.002 ↗
14. Effect of compression with oscillatory torsion processing on structure and properties of Cu10.1016/S1005-0302(11)60190-4 ↗
15. Efficiency of the compression with oscillatory torsion method in grain refinement in Al10.1016/j.acme.2016.05.004 ↗
16. Effect of strain path on structure and mechanical behavior of ultra-fine grain Cu–Cr alloy produced by equal-channel angular pressing10.1016/j.actamat.2005.01.046 ↗
17. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation10.1016/j.matdes.2015.10.157 ↗
18. Role of strain reversal in grain refinement y severe plastic deformation10.1016/j.msea.2008.09.036 ↗
19. Microstructural characteristics of ultrafine-grained aluminum produced by equal channel angular extrusion10.1016/S1359-6462(02)00117-3 ↗
20. Electrical conductivity and mechanical properties of Cu-0.7wt%Cr and Cu-1.0wt%Cr alloys processed y severe plastic deformation10.1088/1757-899X/63/1/012169 ↗
21. Aging behavior and precipitates analysis of the Cu-Cr-Zr-Ce alloy10.1016/j.msea.2015.10.046 ↗
22. Microstructure and properties of cold drawn and annealed submicron crystalline Cu-5% Cr alloy10.1016/S1003-6326(08)60234-4 ↗
23. Microstructure, mechanical properties and electrical conductivity of industrial Cu–0.5%Cr alloy processed by severe plastic deformation10.1016/j.msea.2010.10.059 ↗
24. Mechanism and kinetics of precipitation process in selected copper alloys10.2478/amm-2014-0106 ↗
25. Effect of strain path on structure an mechanical behaviour of ultra-fine grain Cu-Cr alloy produced by equal-channel angular pressing10.1016/j.actamat.2005.01.046 ↗
26. Nanostructured Cu- Cr alloy with high strength and electrical conductivity10.1063/1.4874655 ↗
27. Structure and crystallographic texture in the Cu-Cr-Ag alloy subjected to severe plastic deformation
28. High strength and good electrical conductivity in Cu–Cr alloys processed by severe plastic deformation10.1016/j.matlet.2015.03.144 ↗
29. Phase transformations in a Cu—Cr alloys induced by high pressure torsion10.1016/j.matchar.2016.02.017 ↗
30. Effect of chemical composition on structure and properties of ultrafine grained Cu-Cr-Zr alloys produced by equal-channel angular pressing10.2320/matertrans.45.2187 ↗
31. Influence of microalloying with zirconium on the structure and properties of Cu-Cr alloy after high pressure torsion10.1016/j.msea.2015.10.008 ↗
32. Effect of rare-earth metals addition on microstructure and properties of selected copper alloys10.2478/amm-2014-0105 ↗
33. Microstructure and properties of CuCr0.6 and CuFe2 alloys after rolling with the cyclic movements of rolls10.1016/j.acme.2017.07.001 ↗
34. J. Szala, Computer Program Quantitative Metallography: MET-ILO V.3.0. Edited by Department of Materials Science, Silesian University of Technology, 1997.
35. Warm spray forming of Ti-6Al-4V10.1007/s11666-013-0024-7 ↗
36. Use of micro tensile test Samales in determining the remnant life of pressure vessel steel10.4028/www.scientific.net/AMM.7-8.187 ↗
37. Effect of applied pressure on microstructure development and homogeneity in an aluminum alloy processed by high-pressure torsion10.1016/j.jallcom.2016.07.149 ↗
38. Nanostructured aluminum alloys produced by severe plastic deformation. New horizons in development10.1016/j.msea.2012.09.020 ↗
39. Mechanisms of grain refinement in aluminium alloys in the process of severe plastic deformation10.1007/s11041-006-0044-8 ↗
40. The strength and thermal stability of Al-5Mg alloys nano-engineered using methods of metal forming10.1016/j.msea.2012.06.068 ↗
41. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗
42. Non-equilibrium grain boundary structure and inelastic deformation using atomistic simulations10.1016/j.ijplas.2010.09.011 ↗
43. Sabirov · 2015 · 11
44. Strengthening of metals through severe plastic deformation
45. Structure and properties of copper after large strain deformation10.1002/pssc.200983392 ↗
46. Pinning of grain boundaries by second phase particles in equal-channel angularly pressed Cu-Fe-P alloy10.1016/j.msea.2006.05.081 ↗
47. Tougher ultrafine grain Cu via high-angle grain boundaries and low dislocation density10.1063/1.2870014 ↗
48. High tensile ductility in nanostructured metal10.1038/nature01133 ↗
49. Stored energy, vacancies and thermal stability of ultra-fine grained copper10.1016/j.msea.2008.02.048 ↗