journal article·2018-04

Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel

I. Miyazaki, T. Furuta, K. Oh-ishi, T. Nakagaki, S. Kuramoto, A. Shibata, N. Tsuji

Publisher page

Abstract

Abstract A simple strategy associated with elastic properties that enables metals to undergo multiple plastic deformations based on slip deformation, mechanical twinning, and deformation-induced martensitic transformation was developed in this study. In the Fe–Ni–Al–C alloy designed in this work, the strength and ductility were not in the typical trade-off relationship. The alloy exhibited decreased elongation after strengthening by intermediate amounts of cold working, whereas upon further strengthening, the elongation improved markedly and returned to that in the pre-strengthened state. The tensile behaviors of samples of the alloy indicated that this was due to the thermally stable and plastically unstable austenitic phase that arose after cold working. The microstructures of the samples implied that this austenitic phase stability was due to the occurrence of simultaneous twinning during tensile deformation, and the effect of the plastic accommodation induced by the multiple deformations is discussed in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. The future of metals10.1126/science.1185866 ↗
2. A synchrotron look at steel10.1126/science.1078210 ↗
3. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
4. Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy10.1016/j.scriptamat.2010.03.038 ↗
5. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
6. The conflicts between strength and toughness10.1038/nmat3115 ↗
7. Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
8. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
9. Dislocation and twin substructure evolution during strain hardening of an Fe–22 wt.% Mn–0.6 wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
10. Tensile behavior of TRIP-aided multi-phase steels studied by in situ neutron diffraction10.1016/j.actamat.2004.08.016 ↗
11. Stress- and strain-induced formation of martensite and its effects on strength and ductility of metastable austenitic stainless steels10.1007/BF02913420 ↗
12. Hadfield's manganese steel
13. Ultra high strength FeMn TWIP steels for automotive safety parts10.1051/metal:2005151 ↗
14. High strength Fe-Mn-(Al,Si) TRIP/TWIP steels development – properties – application10.1016/S0749-6419(00)00015-2 ↗
15. Influence of Al on shape memory effect and twinning induced plasticity of Fe-Mn-Si-Al system alloy10.2320/matertrans.MRA2007124 ↗
16. Zener · 1948
17. Every · 1992
18. The elastic constants of Fe-Ni-C alloys
19. Generalized stacking fault energies, ductilities, and twinnabilities of Ni and selected Ni alloys10.1063/1.2051793 ↗
20. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels10.1016/S1359-6454(03)00117-4 ↗
21. Criterion for the action of applied stress in the martensitic transformation10.1016/0001-6160(53)90083-2 ↗
22. Die-hard plastic deformation behavior in an ultrahigh-strength Fe–Ni–Al–C alloy10.1016/j.scriptamat.2015.01.025 ↗
23. Callister · 1994
24. Effect of preliminary plastic deformation on the mechanical properties of austenitic steel at low temperatures10.1007/BF01537685 ↗
25. Effect of pre-deformation on TRIP phenomenon in austenitic Fe-Ni-C alloys10.2472/jsms.25.717 ↗
26. Transformation-induced plasticity of pre-deformed austenite in Fe-Cr-Ni alloy10.2472/jsms.22.329 ↗
27. Dislocation strengthening without ductility trade-off in metastable austenitic steels10.1038/srep35345 ↗
28. Crystallographic similarities in shape memory martensites10.1016/0001-6160(79)90186-X ↗
29. Crystallography of lath martensite in steels10.2320/matertrans1989.33.235 ↗