Deformation mechanisms and texture evolution of in-situ magnesium matrix composites containing polymer derived SiCNO dispersoids during hot compression
Source abstract
Abstract
In-situ magnesium matrix composite was fabricated by injecting a liquid polymer directly into, and having it converted into 2.5 vol% SiCNO ceramic dispersoids, within molten Mg using a stir-casting method. The deformation mechanisms and texture evolution for these as-cast composites were investigated in a strain rate range of 10(-3) - 1 s(-1) within a temperature range of 150-350 degrees C under uniaxial compression. It was observed that the deformed composites follow a power-law creep having a stress exponent, n = 8 and activation energy, Q = 149 kJ mol(-1) which suggest that deformation mechanism is controlled by lattice self-diffusion for constant structure creep. It was found that in the range of 150-250 degrees C, with a ratio of rate of work-softening to rate of work-hardening of about 0.80, twinning induced shear bands nucleate and propagate along the direction of maximum shear stress. When the temperature approaches 350 degrees C, the plastic flow is dominated by dislocation assisted slip. Analysis of Zener-Hollomon parameter (Z) revealed that the transition from twinning into dislocation slip dominated deformation progresses at 10(13) s(-1) < Z < 10(13) s(-1). Macro-textural studies confirm that while basal plane assists deformation by twinning mechanism, the non-basal prismatic planes favor significant plastic deformation by dislocation assisted slip for the in-situ composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Magnesium properties-applications-potentials10.1016/S0921-5093(00)01351-4 ↗
2. Magnesium alloys development towards 21st century
3. Research for a new age of magnesium in the automotive industry10.1016/S0924-0136(01)00780-4 ↗
4. Microstructural evolution during creep of Ca-containing AZ9110.1016/j.msea.2008.04.115 ↗
5. Metal matrix composites: production by the stir casting method10.1016/S0924-0136(99)00118-1 ↗
6. Microstructural and mechanical characteristics of in-situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
7. Processing, microstructural evolution and strength properties of in-situ magnesium matrix composites containing nano-sized polymer derived SiCNO particles10.1016/j.msea.2017.01.001 ↗
8. Nano-ceramic metal matrix composites by in-situ pyrolysis of organic precursors in a liquid melt10.1007/s11661-008-9672-5 ↗
9. Effect of grain size on compressive behavior in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature10.1016/j.msea.2011.04.045 ↗
10. Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals10.1016/j.actamat.2010.11.064 ↗
11. Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium10.1016/j.actamat.2015.01.032 ↗
12. Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals10.1016/j.actamat.2014.11.013 ↗
13. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg-Y alloys10.1016/j.actamat.2010.08.031 ↗
14. Dynamic recrystallization and development of microstructures during high temperature deformation of magnesium10.1016/0001-6160(82)90031-1 ↗
15. Texture evolution during large-strain hot rolling of the Mg AZ61 alloy10.1016/S0921-5093(03)00043-1 ↗
16. Threshold stress and load portioning during creep of MMCs10.1016/j.actamat.2008.01.037 ↗
17. Microstructural processes in creep of an AZ91 magnesium-based composite and its matrix alloy10.1016/S0921-5093(01)01023-1 ↗
18. Hot deformation behavior and processing maps of fine-grained SiCp/AZ91 composite10.1016/j.matdes.2014.11.006 ↗
19. Hot workability and deformation mechanisms in Mg/nano–Al2O3 composite10.1016/j.compscitech.2009.01.032 ↗
20. Effect of volume fraction and particle size on the microstructure and plastic deformation of Mg–Y2O3 composites10.1016/j.msea.2006.01.026 ↗
21. Hot deformation behavior of SiCp/AZ91 magnesium matrix composites fabricated by stir-casting10.1016/j.msea.2008.05.046 ↗
22. Effect of strain rate and ball milling of reinforcement on the compressive response of magnesium composites10.1016/j.compositesa.2011.08.017 ↗
23. Hot deformation mechanisms, microstructure and texture evolution in extruded AZ31–nano-alumina composite10.1016/j.msea.2013.09.062 ↗
24. Compressive creep behavior of TiC/AZ91D magnesium-matrix composites with interpenetrating networks
25. Creep deformation of metal-matrix composites10.1016/0266-3538(85)90010-7 ↗
26. J.J. Fundenberger, B. Beausir, Universite de Lorraine, Metz, JTEX Software for Texture Analysis, 2015. 〈http://jtex-software.eu/〉 (Accessed 20 November 2017).
27. Effect of strain rate upon plastic flow of steel
28. Unique deformation and aging characteristics of certain magnesium-base alloys
29. Effect of particle size on the formation of shear band in particle reinforced metal matrix composites10.1016/j.matlet.2003.10.050 ↗
30. Dynamic recrystallization behavior of bimodal Size SiCp-reinforced Mg matrix composite during hot deformation10.1007/s40195-016-0415-0 ↗
31. Hot deformation behavior and workability characteristics of bimodal size SiCp/AZ91 magnesium matrix composite with processing map10.1016/j.matdes.2014.07.039 ↗
32. Correlation between the tensile properties of pure magnesium and 4 commercial alloys with their mode of fracturing
33. Deformation mechanisms in hcp metals at elevated temperatures-I creep behavior of magnesium10.1016/0001-6160(81)90034-1 ↗
34. Effect of in-situ TiB2 particle reinforcement on the creep resistance of hypoeutectic Al-12Si alloy10.1016/j.jallcom.2004.07.052 ↗
35. Elevated temperature properties of Mg-14Li-B particulate composites10.1557/JMR.1990.1359 ↗
36. Deformation behavior of Mg-Zn-Y alloys reinforced by icosahedral quasicrystalline particles10.1016/S1359-6454(02)00067-8 ↗
37. Model based description of the proof stress of magnesium AZ31 during hot working10.1007/s11661-003-0146-5 ↗
38. Bhadeshia · 2006 · 306
39. Song · Mater. Sci. Eng. A · 2006 · 441 · 110.1016/j.msea.2006.08.095 ↗
40. Suwas · 2014 · 73
41. Relationships of the solid-liquid interface and the crystal orientation for pure magnesium solidified in fashion of cellular crystal10.1016/S1003-6326(09)60136-9 ↗
42. Texture analysis in hexagonal materials10.1016/S0254-0584(03)00168-8 ↗
43. Synthesis and tribological behavior of silicon oxycarbonitride thin films derived from poly(ureamethylvinyl)silazane10.1111/j.1744-7402.2006.02070.x ↗