journal article·2018-01Open access

Influence of equal channel angular pressing on high cycle fatigue behavior of ultrafine-grained iron: Role of anisotropy

Enrico Bruder, Chandanraj Gangaraju, Rimma Lapovok

Abstract

Abstract The high cycle fatigue behavior of ARMCO® Iron processed by equal-channel angular pressing (ECAP) was investigated for routes A and B C , which results in ultrafine-grained microstructures with high and low grain elongations, respectively. Rotating bending fatigue tests along two different testing directions show a significant anisotropy in the fatigue strength for route B C but only marginal differences for route A, in spite of the higher grain elongation and stronger crystallographic texture that is generated by route A. Still, the fatigue damage at the surface of samples processed by route A is highly anisotropic, as it is confined to regions with a certain alignment of the microstructural elongation plane with regard to the surface plane. The anisotropy in high cycle fatigue strength for route B C as well as the surface orientation dependent resistance to fatigue damage for route A are discussed with regard to the alignment of the shear plane during the last ECAP pass and the correlation between the microstructural morphology and subgrain coarsening that lead to fatigue crack initiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
3. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
4. Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route10.1016/j.scriptamat.2010.09.006 ↗
5. On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation10.1016/j.scriptamat.2010.07.014 ↗
6. Optimizing the procedure of equal-channel angular pressing for maximum superplasticity10.1016/S0921-5093(00)01255-7 ↗
7. Superplasticity in nanostructured materials: new challenges10.1016/j.msea.2006.08.121 ↗
8. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
9. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
10. Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms10.1016/j.actamat.2013.01.057 ↗
11. Fracture and fracture toughness of nanopolycrystalline metals produced by severe plastic deformation10.1098/rsta.2014.0366 ↗
12. Revisiting fatigue crack growth in various grain size regimes of Ni10.1016/j.msea.2015.08.071 ↗
13. Fatigue crack growth anisotropy in ultrafine-grained iron10.1016/j.actamat.2016.12.059 ↗
14. Fatigue crack propagation in an ECAP-processed aluminium alloy – influence of shear plane orientation10.1002/mawe.201200008 ↗
15. Fatigue properties of bulk nanostructured materials
16. On the Microstructural stability of ultrafine-grained interstitial-free steel under cyclic loading10.1007/s11661-007-9154-1 ↗
17. On the fatigue behavior of ultrafine-grained interstitial-free steel10.3139/146.101377 ↗
18. Strain localisation patterns under equal-channel angular pressing10.1016/j.jmps.2008.09.012 ↗
19. Anisotropic fracture behavior of ultrafine-grained iron10.1016/j.msea.2009.12.033 ↗
20. The shearing characteristics associated with equal-channel angular pressing10.1016/S0921-5093(98)00750-3 ↗
21. Microstructural characteristics of ultrafine-grained aluminum produced using equal-channel angular pressing10.1007/s11661-998-0102-5 ↗
22. Observations and issues on mechanisms of grain refinement during ECAP process10.1016/S0921-5093(00)00978-3 ↗
23. Effect of processing route on microstructure and texture development in equal channel angular extrusion of interstitial-free steel10.1016/j.actamat.2005.10.042 ↗
24. Texture of IF steel after equal channel angular pressing (ECAP)10.1016/j.actamat.2005.05.024 ↗
25. Microstructural and mechanical study in the plastic zone of ARMCO iron processed by ECAP10.1016/j.msea.2017.04.108 ↗
26. High cycle fatigue of ARMCO iron severely deformed by ECAP10.1016/j.msea.2016.10.010 ↗
27. The effect of testing direction on the fatigue and tensile properties of a Ti–6Al–4V bar
28. D. François, A. Pineau, A. Zaoui, Fatigue, in: Mechanical Behaviour of Materials, Solid Mechanics and Its Applications, Springer, Dordrecht, vol. 191, 2013.10.1007/978-94-007-4930-6 ↗
29. Fatigue behavior and damage characteristic of ultra-fine grain low-purity copper processed by equal-channel angular pressing (ECAP)10.1016/j.msea.2007.04.074 ↗
30. Enhanced fatigue properties of ultrafine-grained Ti rods processed by ECAP-conform10.1007/s10853-012-6675-9 ↗
31. Fatigue life and failure characteristics of an ultrafine-grained Ti–6Al–4V alloy processed by ECAP and extrusion10.1002/adem.201300530 ↗