journal article·2017-02

Deformation behavior of Mg-alloy-based composites at different temperatures studied by neutron diffraction

Gergely Farkas, Kristian Máthis, Ján Pilch, Peter Minárik, Petr Lukáš, Alexei Vinogradov

Publisher page

Abstract

Abstract The influence of the reinforcement short Saffil fibers on the deformation behavior of Mg-Al-Ca alloy-based composite with two different fiber plane orientations is investigated and clarified using in-situ neutron diffraction at room and elevated temperatures. The measured lattice strain evolution points to a more efficient reinforcing effect of fibers at parallel fiber plane orientation, which decreases at elevated temperature. A significant decrement of compressive lattice strain was incidentally observed in the matrix in the direction of load axis when deformation due to the elevated temperature occurred. Electron microscopy revealed the influence of the temperature and fiber orientation on fiber cracking. The EBSD observations corroborated neutron diffraction results highlighting significant twin growth at elevated testing temperatures
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Clyne · 1993 · 7
2. Fabrication, microstructures, and tensile properties of magnesium alloy AZ91/SiCp composites produced by powder metallurgy10.1179/mst.1997.13.7.590 ↗
3. Strengthening and recovery in AX41 magnesium alloy reinforced with short Saffil fibers
4. Processing, microstructure, and mechanical behavior of cast magnesium metal matrix composites10.1007/BF02671259 ↗
5. Development of SiCp/AZ91 magnesium matrix nanocomposites using ultrasonic vibration10.1016/j.msea.2012.01.112 ↗
6. Compressive, shear, and fracture behavior of CNT reinforced Al matrix composites manufactured by severe plastic deformation10.1016/j.matdes.2016.05.109 ↗
7. Effect of reinforcing shape on twinning in extruded magnesium matrix composites10.1016/j.msea.2016.04.028 ↗
8. Acoustic emission from deformed magnesium alloy based composites10.1016/j.msea.2010.11.058 ↗
9. The role of equiaxed particles on the yield stress of composites10.1016/0956-716X(91)90345-2 ↗
10. Study of relaxation of residual internal stress in Mg composites by internal friction10.1016/S0921-5093(01)01293-X ↗
11. Deformation-induced residual stress changes in SiC whisker-reinforced 6061 Al composites10.1007/BF02669615 ↗
12. Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration10.1016/j.msea.2011.08.035 ↗
13. The interface characteristics of as-cast iCp/Mg(AZ80) composite10.1016/S1359-6462(97)00172-3 ↗
14. Mechanical properties and microstructure of SiC-reinforced Mg-(2,4) A1-1Si nanocomposites fabricated by ultrasonic cavitation based solidification processing10.1016/j.msea.2007.09.054 ↗
15. Tensile properties and microstructure of SiC10.1007/s11661-007-9453-6 ↗
16. Mg–6Zn/1.5%SiC nanocomposites fabricated by ultrasonic cavitation-based solidification processing10.1007/s10853-008-2785-9 ↗
17. Mechanical properties and microstructures of nano SiC reinforced ZE10 composites prepared with ultrasonic vibration10.4028/www.scientific.net/AMR.1019.169 ↗
18. Microstructure and mechanical properties of carbon nanotubes reinforced aluminum matrix composites synthesized via equal-channel angular pressing10.1016/j.msea.2016.06.027 ↗
19. Load transfer in short fibre reinforced metal matrix composites10.1016/j.actamat.2007.06.003 ↗
20. Elastic phase-strain distribution in a particulate-reinforced metal-matrix composite deforming by slip or creep10.1007/s11661-999-0136-3 ↗
21. Internal stresses and voids in SiC particle reinforced aluminum composites for heat sink applications10.1016/j.compscitech.2011.01.020 ↗
22. Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking10.1016/j.actamat.2008.05.004 ↗
23. Plasticity of nanostructured Cu-Nb-based wires: strengthening mechanisms revealed by in situ deformation under neutrons10.1016/j.scriptamat.2008.09.032 ↗
24. Effects of triangle-shape fiber on the transverse mechanical properties of unidirectional carbon fiber reinforced plastics10.1016/j.compstruct.2016.05.065 ↗
25. Acoustic emission from deformed magnesium alloy based composites10.1016/j.msea.2010.11.058 ↗
26. Deformation behaviour of an AS21 alloy reinforced by short Saffil fibers and SiC particles
27. Neutron diffraction study and deformation behavior of a composite based Mg alloy reinforced by short Saffil fibers10.12693/APhysPolA.128.758 ↗
28. Thermal residual stress in metal matrix composite10.1016/0001-6160(87)90188-X ↗
29. Plastic properties of a Mg-Al-Ca alloy reinforced with short saffil fibers10.1007/s11661-013-2120-1 ↗
30. Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction10.1016/j.actamat.2006.06.020 ↗
31. Effect of the loading mode on the evolution of the deformation mechanisms in randomly textured magnesium polycrystals - Comparison of experimental and modeling results10.1016/j.ijplas.2015.05.009 ↗
32. Neutron diffraction and acoustic emission study of Mg-Al-Sr alloy reinforced with short Saffil® fibers deformed in compression10.4028/www.scientific.net/MSF.777.92 ↗
33. Hardening and softening processes in an AJ51 magnesium alloy reinforced with short Saffil fibers
34. Effect of temperature on mechanical properties of continuously cast AZ31 magnesium alloy
35. The evolution of non-basal dislocations as a function of deformation temperature in pure magnesium determined by X-ray diffraction10.1016/j.actamat.2004.02.034 ↗
36. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
37. Effect of the fiber orientation on the deformation mechanisms of magnesium-alloy based composite10.1016/j.msea.2015.07.012 ↗
38. On the influence of the grain size and solute content on the AE response of magnesium alloys tested in tension and compression10.1016/j.msea.2006.02.470 ↗