Strain hardening model of TWIP steels with manganese content
Source abstract
Abstract
Abstract High Mn austenitic Fe–Mn–C steel is a superior material which exhibits excellent strain hardening behavior, with high strength and good ductility as a result of deformation-induced twinning. In this paper, a dislocation-based strain hardening model is developed by considering the effect of the Mn content on the mechanical behavior of TWIP steel. The Mn content varies in the range of 22–26 wt%. In the model, the stacking fault energy (SFE) is considered to be dependent on the composition of the TWIP steel and the plastic strain. The driving force for twinning, which is controlled by the SFE, dominates the mechanical twin nucleation probability. The dislocation density evolution, which controls the strain hardening behavior, is influenced by the twinning volume fraction. The mechanical behaviors of TWIP steels with different Mn contents are tested in axisymmetric tension, and the microstructure evolution is observed in-situ by means of light-optical microscopy. The twinning volume fraction is determined on the basis of the observed twin area fraction. The predictions of the proposed model are verified by comparison with experimental data and the influence of the Mn content of the TWIP steel on the mechanical behavior is also analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
2. The relationship between the boundary area and hardness of recrystallized cartridge brass
3. Composition and temperature dependence of tensile properties of austenitic Fe-Mn-Al-C alloys10.1016/0921-5093(89)90844-7 ↗
4. Microband-induced plasticity in a high Mn–Al–C light steel10.1016/j.msea.2008.05.042 ↗
5. Stacking fault energies of seven commercial austenitic stainless steels10.1007/BF02641927 ↗
6. The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels10.1016/j.msea.2007.02.074 ↗
7. Effect of Si and Al additions on the low temperature toughness and fracture mode of Fe-27Mn alloys10.2355/isijinternational.30.632 ↗
8. Influences of silicon on the work hardening behavior and hot deformation behavior of Fe–25wt% Mn–(Si, Al) TWIP steel10.1016/j.jallcom.2014.08.239 ↗
9. Effect of Cu addition on the mechanical behavior of austenitic twinning-induced plasticity steel10.1016/j.scriptamat.2011.09.019 ↗
10. The influence of copper addition on microstructure and mechanical properties of thermomechanically processed microalloyed steels10.1007/s10853-008-3051-x ↗
11. Sugimoto K-i. effects of the addition of Cr, Mo and Ni on the microstructure and retained austenite characteristics of 0.2% C–Si–Mn–Nb ultrahigh-strength TRIP-aided bainitic ferrite steels10.2355/isijinternational.52.1894 ↗
12. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel10.1016/j.msea.2006.12.170 ↗
13. Hot ductility behavior of High-MN austenitic FE–22 Mn–1.5 AL–1.5 SI–0.45 C TWIP Steels microalloyed with Ti and V10.1016/j.msea.2014.05.072 ↗
14. Thermo-mechanical treatment of Fe–Mn–(Al, Si) TRIP/TWIP steels10.1016/j.acme.2012.06.016 ↗
15. Microstructure evolution and phase composition of high-manganese austenitic steels
16. Microstructure evolution of high-manganese steel during the thermomechanical processing
17. Hot deformation and recrystallization of advanced high-manganese austenitic TWIP steels
18. Dislocation and twin substructure evolution during strain hardening of an Fe–22wt% Mn–0.6wt% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
19. Mechanical properties and microstructure evolution during deformation of Fe–Mn–C TWIP steel10.1002/srin.201100322 ↗
20. Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test10.1080/14786435.2011.600736 ↗
21. On the relationship between the twin internal structure and the work-hardening rate of TWIP steels10.1016/j.scriptamat.2010.07.016 ↗
22. Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions10.1016/j.msea.2008.09.031 ↗
23. A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel10.1016/j.msea.2004.01.060 ↗
24. Twinning models in self-consistent texture simulations of TWIP steels10.1002/srin.200806178 ↗
25. Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect10.1016/j.ijplas.2007.11.004 ↗
26. Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure10.1016/j.actamat.2011.08.031 ↗
27. Modeling the deformation textures and microstructural evolutions of a Fe–Mn–C TWIP steel during tensile and shear testing10.1016/j.msea.2012.01.128 ↗
28. Crystal plasticity modeling of texture development and hardening in TWIP steels10.1016/j.actamat.2012.01.015 ↗
29. Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: a multi-scale modeling study10.1016/j.jmps.2011.02.007 ↗
30. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
31. Constitutive model of the TWIP effect in a polycrystalline high manganese content austenitic steel10.1002/srin.200200212 ↗
32. Modelling of TWIP effect on work-hardening10.1016/S0921-5093(00)02019-0 ↗
33. J.K. Kim, Y. Estrin, H. Beladi, S.K. Kim, K.G. Chin, B.C. De Cooman, Constitutive modeling of TWIP steel in uni-axial tension, in: Materials science forum: 2010: Trans Tech Publ, 2010, pp. 270–3.10.4028/www.scientific.net/MSF.654-656.270 ↗
34. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
35. Heterogeneous deformation in twinning-induced plasticity steel10.1016/j.scriptamat.2012.02.028 ↗
36. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
37. A model for alloying in ferromagnetic metals10.1016/0364-5916(78)90011-1 ↗
38. Relationship between stacking-fault energy and x-ray measurements of stacking-fault probability and microstrain10.1063/1.1663122 ↗
39. Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel10.1016/j.msea.2013.09.073 ↗
40. Otte · Philos. Mag. · 1964 · 9 · 29910.1080/14786436408229193 ↗
41. Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels10.1016/j.actamat.2010.01.056 ↗
42. A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels10.1016/0956-7151(92)90114-T ↗
43. Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels10.1016/j.scriptamat.2007.10.050 ↗
44. The effect of grain size on the twin initiation stress in a TWIP steel10.1016/j.actamat.2015.02.008 ↗
45. On the relationship between work hardening and twinning rate in TWIP steels10.1016/j.msea.2012.01.123 ↗
46. Effects of strain, strain rate and temperature on deformation twinning in a Cu–Zn alloy10.1016/j.scriptamat.2008.06.060 ↗
47. Adler · Metall. Trans. · 1970 · 1 · 237510.1007/BF03038366 ↗
48. Effect of carbon content on the mechanical properties and microstructural evolution of Fe-22Mn-C steels10.1016/j.msea.2014.10.042 ↗
49. Application of a dislocation density-based constitutive model to Al-alloyed TWIP steel10.1007/s11661-013-1771-2 ↗
50. Raghavan · Trans. Met. Soc. AIME · 1969 · 245 · 1569