Residual stress distribution of a 6061-T6 aluminum alloy under shear deformation
Source abstract
Abstract
There is a lack of information with regards to the friction effect in ECAPed aluminum alloys, even though it might substantially modify the deformation at the surface. In this work, the friction effect at the surface and the deformation heterogeneity in the ECAPed aluminum alloy 6061-T6 were characterized. X-Ray diffraction was used to determine residual stresses (RS) on the sample surface. The volumetric sections were characterized by Synchrotron diffraction at ESRF beamline ID15B (Grenoble, France). It was found that the microhardness mapping and residual stress results showed a good agreement with the finite element analysis for the first layer studied. Minor strain variation, Delta d/d as a function of (hkl) planes, for the different analyzed sections was found. The study also showed that there was an incomplete symmetry in the residual stress near the surface, even at up to a depth of 400 gm. The regions with higher deformation were found to be at the top and bottom parts of the sample, while the central region showed stress variations of up to 50 MPa. (C) 2016 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
2. Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development10.1016/j.msea.2012.09.020 ↗
3. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
4. Texture and lattice distortion study of an Al-6061-T6 alloy produced by ECAP10.2320/matertrans.M2015200 ↗
5. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
6. New experimental insight into the mechanisms of nanoplasticity10.1016/j.actamat.2013.08.032 ↗
7. Nanograined Ti–Nb microalloy steel achieved by accumulative roll bonding (ARB) process10.1016/j.msea.2013.04.025 ↗
8. Evolution of texture during equal channel angular extrusion of commercially pure aluminum: experiments and simulations10.1016/j.msea.2009.05.028 ↗
9. Microstructure and Texture of Al2SixSn (x=0, 4, 8 mass %) alloys processed by equal channel angular pressing10.2320/matertrans.M2012011 ↗
10. Hardness homogeneity on longitudinal and transverse sections of an aluminum alloy processed by ECAP10.1016/j.msea.2011.01.074 ↗
11. Microtexture and microstructure evolution during processing of pure aluminum by repetitive ECAP10.1016/j.msea.2006.05.009 ↗
12. The evolution of homogeneity and grain refinement during equal-channel angular pressing: a model for grain refinement in ECAP10.1016/j.msea.2005.03.083 ↗
13. The evolution of homogeneity on longitudinal sections during processing by ECAP10.1016/j.msea.2007.08.011 ↗
14. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing10.1016/j.actamat.2004.06.017 ↗
15. Microstructure and texture evolution of the Al-20sn alloy processed by equal-channel angular pressing using route C10.2320/matertrans.M2014225 ↗
16. Designing of ECAP parameters based on strain distribution uniformity10.1016/j.pnsc.2012.08.001 ↗
17. 3D FEM simulations for the homogeneity of plastic deformation in aluminum alloy HS6061-T6 during ECAP10.1016/j.proeng.2011.05.007 ↗
18. Residual stress distribution of Ti-6Al-4V alloy under different ns-LSP processing parameters10.1016/j.apsusc.2013.08.100 ↗
19. Analysis of the unstressed lattice spacing, d0, for the determination of the residual stress in a friction stir welded plate of an age-hardenable aluminum alloy – use of equilibrium conditions and a genetic algorithm10.1016/j.actamat.2014.04.035 ↗
20. Investigation of through thickness residual stress distribution in equal channel angular rolled Al 5083 alloy by layer removal technique and X-ray diffraction10.1016/j.matdes.2012.03.029 ↗
21. EBSD FEG-SEM, TEM and XRD techniques applied to grain study of a commercially pure 1200 aluminum subjected to equal-channel angular-pressing10.1016/j.micron.2005.03.004 ↗
22. Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP10.1016/j.actamat.2013.09.013 ↗
23. Internal stress measurements by high-energy synchrotron X-ray diffraction at increased specimen-detector distance10.1016/S0168-583X(02)01694-4 ↗
24. Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites10.1007/BF02830344 ↗
25. Capturing the texture changes in a zirconium alloy during the allotropic phase transformation10.1016/j.scriptamat.2009.04.031 ↗
26. Two-dimensional detector software: from real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
27. ABAQUS Inc., ABAQUS 6.9 Analysis User's Manual.
28. FEM and metallurgical analysis of modified 6082 aluminium alloys processed by multipass ECAP: influence of material properties and different process settings on induced plastic strain10.1016/j.jmatprotec.2008.04.013 ↗
29. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
30. Evaluating plastic anisotropy in two aluminum alloys processed by equal-channel angular pressing10.1016/j.msea.2008.06.045 ↗