Explore the electron work function as a promising indicative parameter for supplementary clues towards tailoring of wear-resistant materials
Source abstract
Abstract
Abstract For materials used under dynamic loading conditions such as impact and impact wear, an appropriate balance between hardness and toughness is highly desired. However, determination of such a balance is challenging, since the toughness depends on both the mechanical strength and ductility, which complicates the judgement and control. Besides, local defects, poor phases and interfaces all could trigger local cracking and consequent global failure. These undesired structural or microstructural imperfections increase the difficulty in controlling the hardness-toughness balance. In this article, using high-Cr cast irons (HCCI) as example, we demonstrate that electron work function is a promising indicative parameter for supplementary clues to adjust the balance between hardness and toughness for HCCIs towards improved performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Effect of molybdenum and chromium contents in sliding wear of high-chromium white cast iron: the relationship between microstructure and wear10.1016/j.wear.2008.12.095 ↗
2. Hot friction and wear behaviour of high speed steel and high chromium iron for rolls10.1016/j.wear.2009.01.049 ↗
3. Correlation of microstructure with the wear resistance and fracture toughness of white cast iron alloy10.1007/s12540-013-3013-y ↗
4. Microstructure of high (45wt%) chromium cast irons and their resistances to wear and corrosio10.1016/j.wear.2010.11.047 ↗
5. Structure of wear-resistant alloyed white irons10.1007/s11041-007-0077-7 ↗
6. Effects of titanium addition on microstructure and wear resistance of hypereutectic high chromium cast iron Fe–25wt%Cr–4wt%C10.1016/j.wear.2008.12.061 ↗
7. Microstructure refinement of hypereutectic high Cr cast irons using hard carbide-forming elements for improved wear resistance10.1016/j.wear.2013.01.079 ↗
8. Effect of (Fe,Cr)7C3 carbide orientation on abrasion wear resistance and fracture toughness10.1016/j.wear.2010.10.070 ↗
9. Kittel · 2004
10. Callister · 2000
11. Theory of metal surfaces: work function10.1103/PhysRevB.3.1215 ↗
12. 100 years of work function
13. Is work function a surface or a bulk property?10.1016/j.vacuum.2010.01.017 ↗
14. Thermionic emission properties of refractory compounds and materials based on them (a review)10.1007/BF01177935 ↗
15. Effects of secondary β and γ phases on the work function properties of Cu–Be alloys10.1007/s00339-015-9271-4 ↗
16. Generic relation between the electron work function and Young’s modulus of metals10.1063/1.3614475 ↗
17. Dependence of the mechanical behavior of alloys on their electron work function—an alternative parameter for materials design10.1063/1.4852675 ↗
18. In situ measurements of simultaneous electronic behavior of Cu and Al induced by mechanical deformation10.1063/1.2181300 ↗
19. Characterization of interfacial bonding using a scanning Kelvin probe10.1063/1.1829785 ↗
20. Electron work function: a parameter sensitive to the adhesion behavior of crystallographic surfaces10.1063/1.1428766 ↗
21. Electron work function, adhesion, and friction between 3d transition metals under light loads10.1016/j.wear.2005.01.027 ↗
22. Correlation between the wear resistance of Cu-Ni alloy and its electron work function10.1080/14786435.2015.1108532 ↗
23. The relationship between the electron work function and friction behavior of passive alloys under different conditions10.1016/j.apsusc.2015.05.125 ↗
24. Understand the corrosion behavior of isomorphous Cu-Ni alloy from its electron work function10.1016/j.matchemphys.2016.02.009 ↗
25. Gundlach · 1991 · Vol. 4 · 697
26. Microstructure and mechanical properties of high boron white cast iron10.1016/j.msea.2007.10.017 ↗
27. Modification of 27Cr cast iron with alloying yttrium for enhanced resistance to sliding wear in corrosive media10.1007/s11661-002-0031-7 ↗
28. Mechanical properties and erosion resistance of ceria nano-particle-doped ultrafine WC–12Co composite prepared by spark plasma sintering
29. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
30. Abrasive wear behavior of TiB2 particle-reinforced copper matrix composites10.1016/S0921-5093(99)00752-2 ↗
31. The correlation between the electron work function and yield strength of metals10.1002/pssb.201248051 ↗
32. Electron work function: a novel probe for toughness10.1039/C5CP04873G ↗
33. Overview no. 44: the chemistry of fracture: a basis for analysis10.1016/0001-6160(85)90001-X ↗
34. On brittle-to-ductile transition in covalent diamond-like and ionic rock salt structure solids10.1023/A:1018595422284 ↗
35. Griffiths · 1999 · 3
36. Gilman · 2003
37. Atomistic study on the structure and thermodynamic properties of Cr7C3, Mn7C3, Fe7C310.1016/j.actamat.2005.02.039 ↗
38. Huheey · 1983
39. The work function of the elements and its periodicity10.1063/1.323539 ↗
40. Work functions of elements expressedin terms of the Fermi energy and the density of free electrons
41. Effect of particle size on the surface activity of TiC-Ni composite coating via the interfacial valence electron localization10.1039/C5RA24371H ↗