Microstructure evolution of ultra-fine grain low-carbon steel tubular undergoing radial expansion process
Source abstract
Abstract
Abstract Tubular expansion is a cold metal forming process where diameteral change is achieved by propagating a conical mandrel through the tubular either by mechanical pull or hydraulic push. Cold metal forming alters post-expansion mechanical and microstructural properties of tubular material, which may lead to premature failure during operation. In order to prevent tubular from failure, its post-expansion material and mechanical properties must be investigated thoroughly. Initial grains morphology, distribution of phases, and subsequent variation in material and mechanical properties due to expansion process of low-carbon LSX-80 steel tubular are investigated in the current study. The observed microstructure is typical of high strength steels with a mixture of carbon-poor and carbon-rich regions. A noticeable volume fraction of martensite phase was also observed. Presence of smaller grains in the material is a clear indication of the application of grain refinement mechanism to improve strength and toughness. Microhardness and Charpy impact tests were done on unexpanded and expanded sections of tubular in order to determine their mechanical properties. In addition, fractographic analysis was accomplished and obtained results showed that the morphology of the fractured surface was nearly alike at the macroscopic scale throughout the range of expansion ratios considered in this study. However, at the fine microscopic scale, the fractured surface was mostly ductile at low expansion ratio, while it was mainly brittle at large expansion ratio. Hence, an expansion ratio in the vicinity of 15% is highly recommended for the current tubular material in order to have adequate safe margin for down-hole application. An alternative material has to be selected and/or developed in order to realize the goal of achieving higher expansion ratio (≥30%) while preserving the tubular structural integrity after expansion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. J. Cales, in: Proceedings of the Petroleum Society’s Canadian International Petroleum Conference, Calgary, Canada, 2003, Paper # 2003-136.
2. A. Filippov, R. Mack, L. Cook, P. York, L. Ring, T. McCoy, in: Proceedings of the SPE Annual Technical Conference and Exhibition, Houston, Texas, 1999, SPE paper # 56500.
3. D. Campo, C. Williams, A. Filippov, L. Cook, D. Brisco, B. Dean, L. Ring, in: Proceedings of the SPE Drilling Confrence, Amesterdam, Netherland, 2003, SPE paper # 79790.
4. Binggui · Pet. Explor. Dev. · 2009 · 36 · 65110.1016/S1876-3804(09)60152-X ↗
5. Carstens · J. SPE Drill. Complet. · 2006 · 21 · 27910.2118/92622-PA ↗
6. J. Nylund, S.B. Flaming, K. Mitrushi in: Proceedings of the IADC/SPE Drilling Conference and Exhibition, New Orleans, Louisiana, USA, 2010, SPE paper # 128366.
7. DeLange · SPE Drill. Complet. · 2011 · 26 · 41210.2118/135462-PA ↗
8. Kupresan · SPE Drill. Complet. · 2014 · 29 · 36610.2118/168056-PA ↗
9. G. Noel, K. Waddell, in: Proceedings of the 7th ASME International Pipeline Conference (IPC2008), Alberta, Canada, Vol. 2, 2008, pp. 627–637. Paper # IPC2008-64382.10.1115/IPC2008-64382 ↗
10. R.D. Mack, Offshore Technology Confrence, Houston, USA, 2005, OTC paper # 17622.
11. A. Bufalini, R. Morana, P.I. Nice, B.M. Bailey, in: Proceedings of the SPE Annual Technical Confrence and Exhibition, San Antonio, Texas, 2012, SPE Paper # 159684.
12. Pervez · Mater. Manuf. Process. · 2012 · 27 · 72710.1080/10426914.2011.648037 ↗
13. Klever · SPE Drill. Complet. · 2010 · 25 · 39110.2118/111742-PA ↗
14. J. Agata, Tsuru, M.Sawamura, H. Asahi, H. Tsugihara, in: Proceedings of the SPE/IADC Drilling Conference and Exhibition, Amsterdam, Netherlands, 2011, SPE Paper # 139939.
15. Gao · Int. J. Miner., Metall. Mater. · 2015 · 22 · 14910.1007/s12613-015-1055-5 ↗
16. Al-Abri · Int. J. Solids Struct. · 2013 · 50 · 298010.1016/j.ijsolstr.2013.05.013 ↗
17. Sung · Mater. Sci. Eng. A · 2011 · 528 · 335010.1016/j.msea.2011.01.031 ↗
18. Joo · Mater. Sci. Eng. A · 2012 · 546 · 31410.1016/j.msea.2012.03.079 ↗
19. Joo · Mater. Sci. Eng. A · 2012 · 556 · 60110.1016/j.msea.2012.07.033 ↗
20. P. Cizek, in: Proceedings of the 10th International Metallurgical and Materials Conference (METAL 2001), Ostrava, Czech Republic, 2001.
21. Deng · J. Mater. Sci. Technol. · 2010 · 26 · 80310.1016/S1005-0302(10)60128-4 ↗
22. Yi · Mater. Sci. Eng. A · 2011 · 528 · 590010.1016/j.msea.2011.03.111 ↗
23. Joo · ISIJ Int. · 2013 · 53 · 130510.2355/isijinternational.53.1305 ↗
24. D.G. Stalheim, G. Muralidharan, in: Proceedings of the 6th ASME International Pipeline Conference (IPC 2006), Alberta, Canada, Vol. 3, 2006, pp. 231–238. Paper No. IPC2006-10251.
25. Han · Metall. Mater. Trans. A · 2010 · 41 · 32910.1007/s11661-009-0135-4 ↗
26. Rosado · Int. J. Sustain. Constr. Des. · 2013 · 4 · 1
27. H. Asahi, E. Tsuru, T. Motoyoshi, I. Hiroshige, H. Tsugihara, NACE Int'l: CORROSION 2005, Houston, Texas, 2005, NACE Paper # 05121.
28. V. Palanisamy, J.K. Solberg, B. Salberg, P.T. Moe, in: Proceedings of the 31st ASME International Conferewnce on Ocean, Offshore and Arctic Engineering (OMAE2012), Rio de Janeiro, Brazil, Vol. 6, 2012, pp. 253–259. Paper # OMAE2012-83937.10.1115/OMAE2012-83937 ↗
29. ASTM E8 / E8M-13a, Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2013, 〈www.astm.org〉.
30. ASTM E23-12c · 2012
31. Y. Yamazaki, Y. Miyata, M. Kimura, K. Sakata, M. Tanaka, US Pat. No 0116975 A1, 2007.
32. G.M. Reavis, B.W. Lowery, R.R. Myers, B.A. Urech, US Pat. No 0289814 A1, 2008.
33. H. Takabe, M. Ueda, K. Kondo, T. Ohe, US Pat. No 0032246 A1, 2009.
34. Sherby · Mat. Trans. · 2008 · 49 · 201610.2320/matertrans.MRA2007338 ↗
35. Bhadeshia · 2006
36. Song · Mater. Sci. Eng. A · 2006 · 441 · 110.1016/j.msea.2006.08.095 ↗
37. Calcagnotto · Mater. Sci. Eng. A · 2010 · 527 · 783210.1016/j.msea.2010.08.062 ↗
38. Vahdat · Int. J. Steel Struct. · 2014 · 14 · 57110.1007/s13296-014-3014-9 ↗
39. Niaki · Adv. Mater. · 2015 · 4 · 110.11648/j.am.s.2015040201.11 ↗
40. C.H.J. Gerritsen, D.J. Howarth, in: Proceedings of the 11th CF/DRDC International Meeting on Naval Applications of Materials Technology, Halifax, Canada, 2005.