Mechanical testing via dominant shear deformation of small-sized specimen
Source abstract
Abstract
Abstract We report on the miniaturization of a recently introduced novel specimen geometry, the so-called shear compression specimen (SCS). The SCS consists of a cylinder- or beam-shaped geometry in which two diametrically opposed slots are machined at 45° with respect to the longitudinal axis to form the test gauge section. The miniaturized SCS (m-SCS) were prepared by spark erosion and have a typical gauge width of 100 μm. Numerical analysis of the deformation behavior of the m-SCS shows that the dominant deformation mode in the gauge section is shear and stresses and strains are rather uniform. The m-SCS was validated by comparing results obtained from m-SCS testing with those received from standardized tension testing. Shear deformation of nanocrystalline metals beyond 10% strain has been demonstrated. The m-SCS seems to have the potential to emerge as a versatile tool for studying the plasticity of nanocrystalline and glassy materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced Surface Polishing Techniques · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Binnig · Phys. Rev. Lett. · 1986 · 56 · 93010.1103/PhysRevLett.56.930 ↗
2. Binnig · Rev. Mod. Phys. · 1999 · 71 · 32410.1103/RevModPhys.71.S324 ↗
3. Giessibl · Rev. Mod. Phys. · 2003 · 75 · 94910.1103/RevModPhys.75.949 ↗
4. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
5. Yang · 2008
6. Lucas · Metall. Trans. A · 1990 · 21 · 110510.1007/BF02698242 ↗
7. Rittel · Exp. Mech. · 2002 · 42 · 5810.1007/BF02411052 ↗
8. Dorogoy · Exp. Mech. · 2005 · 45 · 16710.1007/BF02428190 ↗
9. Rittel · Mech. Mater. · 2002 · 34 · 62710.1016/S0167-6636(02)00164-3 ↗
10. Vural · Metall. Mater. Trans. A · 2003 · 34A · 287310.1007/s11661-003-0188-8 ↗
11. Rittel · Metall. Mater. Trans. A · 2004 · 35A · 378710.1007/s11661-004-0284-4 ↗
12. Bhattacharayya · Scr. Mater. · 2005 · 52 · 65710.1016/j.scriptamat.2004.11.019 ↗
13. Dorogoy · Exp. Mech. · 2005 · 45 · 17810.1007/BF02428191 ↗
14. Bhattacharayya · Metall. Mater. Trans. A · 2006 · 37A · 113710.1007/s11661-006-1092-9 ↗
15. Dorogoy · Exp. Mech. · 2006 · 46 · 35510.1007/s11340-006-6414-8 ↗
16. Rittel · Mater. Sci. Eng. A · 2006 · 432 · 19110.1016/j.msea.2006.05.154 ↗
17. Rittel · Mech. Mater. · 2008 · 40 · 62910.1016/j.mechmat.2008.03.002 ↗
18. DIN e.V., DIN-Taschenbuch 19, Beuth, 2006.
19. Birringer · Phys. Lett. A · 1984 · 102 · 36510.1016/0375-9601(84)90300-1 ↗
20. Voce · J. Inst. Met. · 1948 · 74 · 537
21. Ebrahimi · Nanostruct. Mater. · 1999 · 11 · 34310.1016/S0965-9773(99)00050-1 ↗