journal article·2012-07

High-cycle fatigue characteristics of non-heat-treated steels developed for bolt applications

Sung Hyuk Park, Seong-Gu Hong, Young Soo Chun, You-Hwan Lee, Chong Soo Lee

Publisher page

Abstract

Abstract High-cycle fatigue behavior of non-heat-treated steels for 900 MPa grade bolt applications, developed as substitutes for tempered martensite (TM) steel, was investigated. Four types of non-heat-treated steels with ferrite–pearlite (F–P) and granular bainitic ferrite (GBF) microstructures were developed by combining alloying and air cooling processes. The developed materials exhibited a similar tensile strength (840–890 MPa) as that of TM steel (910 MPa) but their fatigue ratios R f = (fatigue strength at 10 7 cycles)/(tensile strength) were somewhat different from each other; in the F–P steels R f was comparable to that of the TM steel but the GBF steels showed a somewhat reduced R f (∼11%), due to a change in the crack initiation mechanism. For both TM and F–P steels, fatigue cracks initiated at the specimen surface, irrespective of the stress amplitude applied, and thus their R f values became similar and conventional stress amplitude vs. fatigue life (S–N) curves were resulted. In the GBF steels, however, fatigue cracks initiated at inclusions, as the stress amplitude applied was low; this different crack initiation mechanism led to a reduction of fatigue strength and caused a duplex S–N curve. It was found that the F–P steels are a promising candidate to substitute for the TM steel in terms of the tensile strength and high-cycle fatigue resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Matlock · J. Mater. Process. Technol. · 2001 · 117 · 32410.1016/S0924-0136(01)00792-0 ↗
2. Linaza · Scr. Mater. · 1993 · 29 · 45110.1016/0956-716X(93)90146-J ↗
3. Tavarse · Scr. Mater. · 1999 · 40 · 88710.1016/S1359-6462(99)00042-1 ↗
4. Kim · Metall. Trans. A · 1981 · 12 · 48310.1007/BF02648546 ↗
5. Padmanabhan · J. Mater. Process. Technol. · 2008 · 207 · 29310.1016/j.jmatprotec.2008.06.052 ↗
6. Sankaran · Mater. Sci. Eng. A · 2003 · 345 · 32810.1016/S0921-5093(02)00511-7 ↗
7. Yang · Mater. Des. · 1992 · 13 · 33510.1016/0261-3069(92)90003-Z ↗
8. Lis · J. Mater. Process. Technol. · 1997 · 64 · 25510.1016/S0924-0136(96)02575-7 ↗
9. Farsetti · Int. J. Fatigue · 1988 · 10 · 15310.1016/0142-1123(88)90057-6 ↗
10. Shah Khan · Int. J. Fatigue · 1992 · 14 · 31310.1016/0142-1123(92)90482-R ↗
11. Fatemi · Int. J. Fatigue · 2004 · 26 · 66310.1016/j.ijfatigue.2003.10.005 ↗
12. Park · ISIJ Int. · 2005 · 45 · 135210.2355/isijinternational.45.1352 ↗
13. Jun · Mater. Sci. Eng. A · 2006 · 422 · 15710.1016/j.msea.2005.05.008 ↗
14. Townsend · 1979
15. Beidokhti · Mater. Charact. · 2009 · 60 · 22510.1016/j.matchar.2008.09.005 ↗
16. Gojic · Strojarstvo · 2005 · 47 · 101
17. Hong · J. Mater. Res. · 2010 · 25 · 78410.1557/JMR.2010.0094 ↗
18. Suresh · 1991
19. Buch · 1995
20. Basquin · Am. Soc. Test. Mater. Proc. · 1910 · 10 · 625
21. Sadananda · Int. J. Fatigue · 2007 · 29 · 206010.1016/j.ijfatigue.2007.02.028 ↗
22. Murakami · 2002
23. Bathias · 2005
24. Shiozawa · Int. J. Fatigue · 2009 · 31 · 88010.1016/j.ijfatigue.2008.11.001 ↗
25. Shiozawa · Int. J. Fatigue · 2010 · 32 · 54110.1016/j.ijfatigue.2009.06.011 ↗
26. Al-Abbasi · Mater. Sci. Eng. A · 2010 · 527 · 690410.1016/j.msea.2010.07.045 ↗
27. Honeycombe · 1981
28. Atienza · Scr. Mater. · 2005 · 52 · 30510.1016/j.scriptamat.2004.10.010 ↗
29. Martinez-Perez · Acta Mater. · 2004 · 52 · 530310.1016/j.actamat.2004.07.036 ↗
30. Llorca · Fatigue Fract. Eng. Mater. Struct. · 1989 · 12 · 3110.1111/j.1460-2695.1989.tb00506.x ↗