Determination of interfacial fracture toughness of coatings using circumferentially notched cylindrical substrate
Source abstract
Abstract
Abstract The evaluation of interfacial strength is a challenging task due to the complexity of loading, the thickness of coating and the material conditions of interface cracking and coating spallation. In this study, a new method using circumferentially notched tensile (CNT) specimens is proposed for evaluating the interfacial fracture toughness of coated materials. The 0°, 15°, 30° and 45° notch angled mild steel cylindrical substrates with electroplated nickel were tensile tested. A well defined precrack was introduced at the interface for quantitative evaluation of adhesion. In situ acoustic signals were acquired to obtain the crack initiation or the critical load. The crack initiation and propagation were analysed using scanning electron microscope. Finite element analyses were used to evaluate the critical interface energy release rate as a function of mode mixity from the obtained critical load. The results showed an increase in the interfacial fracture toughness values with an increase in the phase angle. Based on the findings, it has been concluded that this proposed method is an easier testing method to evaluate the adhesive properties of coatings on metallic substrates compared to traditional methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Numerical methods in engineering · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. The thermomechanical integrity of thin films and multilayers10.1016/0956-7151(94)00444-M ↗
2. Mittal · 1995
3. Taylor · 2006
4. A review of the methods for the evaluation of coating–substrate adhesion10.1016/0921-5093(91)90482-3 ↗
5. On the determination of residual stress and mechanical properties by indentation10.1016/j.msea.2005.10.034 ↗
6. Elastic and plastic properties of thin films on substrates: nanoindentation techniques
7. Measurement of mechanical properties by ultra-low load indentation10.1016/S0921-5093(98)00724-2 ↗
8. Adhesion strength of Ni film on Ti substrate characterized by three-point bend test, peel test and theoretic calculation10.1016/j.msea.2005.12.024 ↗
9. Evaluation of fracture characteristics of ceramic coatings on stainless steel substrates using circumferentially notched tensile specimens10.1016/j.compositesb.2011.04.007 ↗
10. Interface crack between two elastic layers10.1007/BF00018123 ↗
11. Elastic–plastic and asymptotic fields of interface cracks10.1007/BF00018380 ↗
12. Sandwich test specimens for measuring interface crack toughness10.1016/0921-5093(89)90382-1 ↗
13. Cracks on bimaterial interfaces: elasticity and plasticity aspects10.1016/0921-5093(91)90727-5 ↗
14. Elastic fracture mechanics concepts for interfacial cracks10.1115/1.3173668 ↗
15. Young's modulus of electroplated Ni thin film for MEMS applications10.1016/j.matlet.2004.02.044 ↗
16. Three-dimensional finite element analysis of double-lap composite adhesive bonded joint using submodeling approach10.1016/S1359-8368(99)00026-8 ↗
17. A novel blister test to evaluate the interface strength between nickel coating and low carbon steel substrate10.1016/j.msea.2008.09.077 ↗
18. Interfacial toughness measurements for thin films on substrates10.1016/S1359-6454(01)00354-8 ↗
19. Validity requirements for fracture toughness measurements obtained from small circumferentially notched cylindrical specimens10.1016/0013-7944(87)90190-1 ↗