The oxidation resistance performance of stainless steel foam with 3D open-celled network structure at high temperature
Source abstract
Abstract
Abstract The effects of stainless steel powder particle size, sintering temperature and soaked time on the oxidation resistance performance of foam with 3D open-cell network structure at 800 °C were mainly investigated, and the improvement mechanism of Cr 3 C 2 on the oxidation resistance performance of foam was also discussed in this paper. The experimental results show that the oxidation resistance performance of foam improves with the decrease of stainless steel powder particle size, the increase of sintering temperature and the prolongation of soaked time, which may be due to the facts that the fine particle size, high sintering temperature and long soaked time can make the foam sintered compactly and the oxidizable interface between foam and air medium shrink, at the same time, the open porosity of foam decreases; the addition of Cr 3 C 2 is effective to improve the oxidation resistance ability of foam at high temperature due to that the preferential formation of excessive compact anti-oxidation Cr 2 O 3 film in the existence of Cr 3 C 2 ; however, the bending strength decrease with the content of Cr 3 C 2 rising.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Catalytic Processes in Materials Science · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Zhao · Mater. Sci. Eng. A · 2004 · 367 · 12310.1016/j.msea.2003.10.241 ↗
2. John · Prog. Mater. Sci. · 2001 · 46 · 55910.1016/S0079-6425(00)00002-5 ↗
3. Zhao · Int. J. Heat Mass Transfer · 2004 · 47 · 292710.1016/j.ijheatmasstransfer.2004.03.006 ↗
4. Park · Mater. Sci. Eng. A · 2000 · 288 · 11110.1016/S0921-5093(00)00761-9 ↗
5. Ren · Foundry Equip. Technol. China · 1994 · 2 · 42
6. Roberto · Int. J. Mech. Sci. · 2005 · 47 · 2610.1016/j.ijmecsci.2004.12.007 ↗
7. Gaillard · Mater. Sci. Eng. A · 2004 · 374 · 25010.1016/j.msea.2004.03.015 ↗
8. Neumann · 1999 · p.167
9. Tada · J. Jpn. Soc. Powder Metall. · 1997 · 44 · 32310.2497/jjspm.44.323 ↗
10. Kanahashi · Mater. Sci. Eng. A · 2001 · 308 · 28310.1016/S0921-5093(01)01199-6 ↗
11. Mukai · Scripta Mater. · 1999 · 41 · 36510.1016/S1359-6462(99)00186-4 ↗
12. Lin · Mater. Sci. Eng. Powder Metall. · 2005 · 10 · 128
13. Park · Mater. Sci. Eng. · 2001 · 297 · 6210.1016/S0921-5093(00)01265-X ↗
14. Fang · Phys. Chem. Test-Phys. Fascicule · 2000 · 36 · 258
15. Wang · Filtr. Sep. · 2003 · 13 · 26
16. X.Y. Zhou, J. Lie, B. Long, et al. Porous metallic foams with 3-D open cells or partial connected pore and their preparation methods [P] (2005) 9, application no. CN 200510032174.7
17. Bautisa · Corros. Sci. · 2003 · 45 · 134310.1016/S0010-938X(02)00217-2 ↗
18. Chang · J. Mater. Sci. Lett. · 1999 · 18 · 41910.1023/A:1006613624476 ↗
19. Liao · 2003
20. X.Y. Zhou, B. Long, J. Li, The effects of the sintering schedule on the performance of stainless steel foam with 3-D opened network structure, Powder Metall. Technol., (submitted for publication).
21. Li · 2003
22. Guo · 1998
23. Hirota · Mater. Sci. Eng. A · 2005 · 399 · 15410.1016/j.msea.2005.02.062 ↗
24. Li · 2003