Experimental correlation between varying silicon carbide and hardness values in heat-treated Al–Si–Fe/SiC particulate composites
Source abstract
Abstract
Abstract The effects of varying silicon carbide on the hardness values of heat-treated Al–Si–Fe/SiC particulate composites have been investigated. The 5–25% SiC additions were used for the production of different grades of Al–Si–Fe/SiC particulate composites. The composites samples were solution heat-treated at 500 °C for 3 h and quenched in warm water at 65 °C, aged at 100, 200 and 300 °C with various ageing time between 60 and 660 min at 60 min interval. Hardness measurements were made using Rockwell hardness tester. Experimental correlations obtained between the varying silicon carbide addition, heat-treatment parameters and the hardness values were analyzed using kinetic of ageing and factorial analysis (2K). The results show that hardness increases with increasing percentage of silicon carbide addition in the alloy and decreases with increasing ageing time. These results, which are in agreement with the experimental findings for these ageing time and temperatures. The increases in hardness values during ageing are attributed to formation of a coherent and uniform precipitation of the second phase in the matrix of the metal. A substantial improvement in hardness has been achieved in the reinforced metal matrices produced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Clyne · 2000 · 26
2. Sagail · Scripta Metall. Mater. · 1992 · 87110.1016/0956-716X(92)90674-4 ↗
3. Clyne · 2001 · 26
4. Maruyama · AMPTIAC Newslett. · 1998 · 23
5. A. Jokinen, V. Rauta, Manufacturing and Properties of aluminium alloy matrix composites, Final Report, Espoo: Technical Research Centre of Finland Metallurgy Laboratory, 1992, pp. 1–23.
6. I.A. Oguocha, Characterization of aluminium alloy 2618 and its composites containing alumina particles, unpublished Ph.D. Thesis, Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, 1999, pp. 1–200 (unpublished).
7. Rajan · 1988
8. Ghosh · J. Mater. Sci. Technol. · 2004 · 20 · 82510.1179/026708304225019650 ↗
9. Lloyd · Int. Mater. Rev. · 1999 · 3 · 5
10. Rohatgi · 1988 · 1
11. S. Jayalakshmi, S. Seshan, S.V. Kailas, S. Srivatsan, Influence Processing and Reinforcement on Microstructure and Impact Behaviour of Magnesium Alloy AM100 S̄adhan̄a, vol. 29, Part 5, October 2004, pp. 509–523 (©Printed in India).10.1007/BF02703258 ↗
12. Irwin · 1987