journal article·2003-06

Deformation mechanisms in tensile fracture of Al foils containing Si precipitates

Y. Satoh, T. Yoshiie, H. Mori, M. Kiritani

Materials Science and Engineering: A· Volume 350· Issue 1-2
Publisher page

Abstract

Abstract Recently, Kiritani et al . proposed a new mechanism of plastic deformation without involving dislocations in tensile fracture of metal foils. The paper reports transmission electron microscopy (TEM) study of tensile fracture of Al containing hard precipitates (Si) that are considered to act as obstacles to dislocation motion. In sawtooth-shaped thin-foils formed at the fracture tip (‘sawtooth portion’), tensile strain was as high as 10 3 , but only a few dislocations were pinned to precipitates. Instead, voids were formed at precipitate/matrix interface, elongated in the direction of tension, and broke up into several smaller voids, due to stress concentration around hard precipitates. The thicker area of the specimen (‘base portion’), where tensile strain was 30, did not contain voids but showed a dislocation cell structure. In tensile fracture of pre-thinned specimen, voids were formed in the sawtooth portion, despite the tensile strain also being 30. These results suggest that the sawtooth portion is formed by a new mechanism that does not involve dislocations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Kiritani · Philosophical Magazine Letters · 1999 · 79 · 79710.1080/095008399176616 ↗
2. Y. Satoh, T. Yoshiie, H. Mori, M. Kiritani, Radiation Effects and Defects in Solids 157 (2002) 31–42.10.1080/10420150211406 ↗
3. Massalski · 1990
4. K. Sato, T. Yoshiie, Y. Satoh, Q. Xu, M. Kiritani, Simulation of vacancy migration energy in Cu under high strain, PII: S0921-5093(02)006925.
5. K. Arakawa, et al., Radiation Effects and Defects in Solids 157 (2002) 25–30.10.1080/10420150211415 ↗
6. Rosenfield · Metallurgical Reviews · 1968 · 13 · 2910.1179/mtlr.1968.13.1.29 ↗
7. Thompson · Scripta Metallurgica · 1976 · 10 · 20510.1016/0036-9748(76)90150-2 ↗
8. Chan · Acta Metallurgica · 1981 · 29 · 122110.1016/0001-6160(81)90013-4 ↗