Towards high performance GNFs/Ti composite through simultaneously manipulating laminated microstructure and interface reaction
Source abstract
Abstract
Abstract Bulk graphene nano-flakes (GNFs)-reinforced Ti matrix composite (GNFs/Ti) was obtained by laminated microstructure design. By means of a novel flake powder assembly approach, the GNFs possessed high compatibility with Ti flakes and achieved uniform dispersion in matrix. Powder mixtures were consolidated through low-temperature sintering and short-time heat treatment strategy to simultaneously manipulate the interface reaction and microstructure. Compared with the unreinforced Ti matrix, GNFs/Ti composites were shown to obtain significantly improved strength. Specially, the 0.46 vol% GNFs/Ti composite heat-treated at 1023 K for 450s exhibited the exceptional well ductility with a superior high compressive yield strength of ~2 GPa, which was interpreted by the strong GNFs-Ti interface, and the extrinsic toughening effect as a result of the laminated microstructure and improvement of matrix grain bonding. This work provided a feasible way to construct the high performance nano-carbon reinforced Ti-based composites, and underscore the importance of interface reaction and microstructure design for achieving the well strength-ductility combination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Multiscale architecture and superior high-temperature performance of discontinuously reinforced titanium matrix composites10.1002/adma.202000688 ↗
2. Roles of reinforcements in twin nucleation and nano- α precipitation in the hybrid TiB/TiC-reinforced titanium matrix composites during high-temperature fatigue10.1016/j.scriptamat.2021.113758 ↗
3. High-performance titanium-based composite strengthened with in-situ network-distributed 3D reinforcements10.1016/j.msea.2020.140572 ↗
4. Multiplied bending ductility and toughness of titanium matrix composites by laminated structure manipulation10.1016/j.matdes.2020.109237 ↗
5. Good strength-plasticity compatibility in graphene nanoplatelets/Ti composites by strengthening the interface bonding via in-situ formed TiB whisker10.1016/j.ceramint.2020.09.241 ↗
6. Multi-layer graphene/copper composites: preparation using high-ratio differential speed rolling, microstructure and mechanical properties10.1016/j.carbon.2013.11.058 ↗
7. Nucleation and growth mechanisms of interfacial carbide in graphene nanosheet/Al composites10.1016/j.carbon.2020.01.032 ↗
8. Introducing graphene (reduced graphene oxide) into Al matrix composites for enhanced high-temperature strength10.1016/j.compositesb.2020.108095 ↗
9. Microstructural evolution, mechanical and physical properties of graphene reinforced aluminum composites fabricated via powder metallurgy10.1016/j.msea.2020.140669 ↗
10. Graphene-boundary strengthening mechanism in Cu/graphene nanocomposites: a molecular dynamics simulation10.1016/j.matdes.2020.108555 ↗
11. Synergistic strengthening effect of in-situ synthesized WC1-x nanoparticles and graphene nanosheets in copper matrix composites10.1016/j.compositesa.2020.105891 ↗
12. Fabricating graphene nanoplatelets/nickel composites of balanced strength and ductility10.1016/j.matchemphys.2021.124254 ↗
13. Metal-graphene interfaces in epitaxial and bulk systems: a review10.1016/j.pmatsci.2020.100652 ↗
14. The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design-a review10.1016/j.pmatsci.2020.100672 ↗
15. Synthesis, characterization, and properties of graphene reinforced metal-matrix nanocomposites10.1016/j.compositesb.2019.107664 ↗
16. Significant radiation tolerance and moderate reduction in thermal transport of a tungsten nanofilm by inserting monolayer graphene10.1002/adma.201604623 ↗
17. Strengthening effect of single-atomic-layer graphene in metal-graphene nanolayered composites10.1038/ncomms3114 ↗
18. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
19. Enhanced mechanical properties of graphene (reduced graphene oxide)/Aluminum composites with a bioinspired nanolaminated structure10.1021/acs.nanolett.5b03492 ↗
20. Aligning graphene in bulk copper: nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity10.1016/j.carbon.2017.02.089 ↗
21. High-temperature properties of extruded titanium composites fabricated from carbon nanotubes coated titanium powder by spark plasma sintering and hot extrusion10.1016/j.compscitech.2012.05.002 ↗
22. Carbonaceous nanomaterial reinforced Ti-6Al-4V matrix composites: properties, interfacial structures and strengthening mechanisms10.1016/j.carbon.2020.04.009 ↗
23. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
24. Simultaneous strengthening and toughening of reduced graphene oxide/alumina composites fabricated by molecular-level mixing process10.1016/j.carbon.2014.06.074 ↗
25. Fabrication of in-situ grown graphene reinforced Cu matrix composites10.1038/srep19363 ↗
26. The fabrication of graphene-reinforced Al-based nanocomposites using high pressure torsion10.1016/j.actamat.2018.10.060 ↗
27. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites10.1016/j.actamat.2017.08.048 ↗
28. Powder metallurgy titanium metal matrix composites reinforced with carbon nanotubes and graphite10.1016/j.compositesa.2012.12.005 ↗
29. Powder metallurgy Ti-TiC metal matrix composites prepared by in situ reactive processing of Ti-VGCFs system10.1016/j.carbon.2013.04.088 ↗
30. Enhanced mechanical properties of Al5083 alloy with graphene nanoplates prepared by ball milling and hot extrusion Mater10.1016/j.msea.2016.01.076 ↗
31. Rapid and low temperature spark plasma sintering synthesis of novel carbon nanotube reinforced titanium matrix composites10.1016/j.carbon.2015.08.061 ↗
32. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite10.1016/j.matdes.2017.12.016 ↗
33. A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
34. The sintering mechanism in spark plasma sintering e proof of the occurrence of spark discharge10.1016/j.scriptamat.2014.03.011 ↗
35. The discrete element method for the simulation of ball mills10.1016/0307-904X(92)90035-2 ↗
36. Effect of different milling media for surface coating on the copper powder using two kinds of ball mills with discrete element method simulation10.3390/coatings10090898 ↗
37. Mechanical alloying in a planetary ball mill: kinematic description
38. Introducing graphene (reduced graphene oxide) into Al matrix composites for enhanced high-temperature strength10.1016/j.compositesb.2020.108095 ↗
39. Microstructure and properties of copper coated graphene nanoplates reinforced Al matrix composites developed by low temperature ball milling10.1016/j.carbon.2019.12.029 ↗
40. Fabrication of biomimetic titanium laminated material using flakes powder metallurgy10.1007/s10853-018-2086-x ↗
41. Comparative study of first- and second-order Raman spectra of MWCNT at visible and infrared laser excitation10.1016/j.carbon.2006.03.003 ↗
42. Identifying and understanding the effect of milling energy on the synthesis of carbon nanotubes reinforced titanium metal matrix composites10.1016/j.carbon.2015.12.041 ↗
43. An overview of graphene and its derivatives reinforced metal matrix composites: preparation, properties and applications10.1016/j.carbon.2020.08.040 ↗
44. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
45. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
46. Nanocrystalline metals prepared by high-energy ball milling10.1007/BF02646980 ↗
47. Scalable production of graphene sheets by mechanical delamination10.1016/j.carbon.2010.05.003 ↗
48. Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method10.1016/j.carbon.2018.09.041 ↗
49. Bioinspired hierarchical Al2O3/Al laminated composite fabricated by flake powder metallurgy10.1016/j.compositesa.2020.106187 ↗
50. Achieving high performance in graphite nano-flakes reinforced titanium matrix composites through a novel reaction interface design10.1016/j.carbon.2021.01.113 ↗
51. Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries10.1021/nl800957b ↗
52. Development of large-size ceramic/mrtal bulk FGM fabricated by spark plasma sintering10.4028/www.scientific.net/MSF.308-311.83 ↗
53. Grain-size effects during dynamic recrystallization of nickel10.1179/msc.1974.8.1.325 ↗
54. Stress-driven migration of deformation-distorted grain boundaries in nanomaterials10.1016/j.actamat.2015.01.052 ↗
55. The role of low angle grain boundary in deformation of titanium and its size effect10.1016/j.scriptamat.2018.10.054 ↗
56. Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions10.1016/j.scriptamat.2015.11.011 ↗
57. Influence of crystallographic orientation upon microscopic indentation shape on pure titanium10.2472/jsms.57.249 ↗
58. Impact of texture on mechanical properties in an advanced titanium alloy10.1016/S0921-5093(00)02034-7 ↗
59. Microstructure evolution and superior tensile properties of low content graphene nanoplatelets reinforced pure Ti matrix composites10.1016/j.msea.2017.01.072 ↗
60. On the condensation and preferred orientation of TiC nanocrystals -effects of electric field, substrate temperature and second phase10.1016/S0921-5093(99)00504-3 ↗
61. Atomic chemical composition and reactivity of the TiC (111) surface10.1016/0039-6028(85)90680-6 ↗
62. Uniform dispersion of multi-layer graphene reinforced pure titanium matrix composites via flflake powder metallurgy10.1016/j.msea.2018.04.056 ↗
63. Enhanced mechanical properties of few-layer graphene reinforced titanium alloy matrix nanocomposites with a network architecture10.1016/j.matdes.2019.108330 ↗
64. Microstructural evolution and mechanical properties of graphene-reinforced Ti-6Al-4V composites synthesized via spark plasma sintering10.3390/met10060737 ↗
65. A simple way to fabricate Ti6Al4V matrix composites reinforced by graphene with exceptional mechanical properties10.1016/j.matlet.2019.126750 ↗
66. Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder10.1016/j.carbon.2020.04.010 ↗
67. In-situ synthesis and superhigh modulus of network structured TiC/Ti composites based on diamond-Ti system10.1016/j.jallcom.2020.155248 ↗
68. Self-assembled, aligned TiC nanoplatelet-reinforced titanium composites with outstanding compressive properties10.1016/j.scriptamat.2013.03.017 ↗
69. Mechanical properties and microstructures of composites of Ti-based metallic Glass and β–Ti10.2320/matertrans.MJ200756 ↗
70. Novel Ti-base nanostructure–dendrite composite with enhanced plasticity10.1038/nmat792 ↗
71. Strengthening behavior of few-layered graphene/aluminum composites10.1016/j.carbon.2014.10.044 ↗
72. Halle-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
73. Consideration of Orowan strengthening effect in particulate reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
74. Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods10.1016/j.msea.2012.11.058 ↗
75. High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane10.1016/j.msea.2020.139924 ↗
76. Self-assembled, aligned TiC nanoplatelet-reinforced titanium composites with outstanding compressive properties10.1016/j.scriptamat.2013.03.017 ↗
77. The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution10.1016/j.carbon.2011.12.057 ↗
78. Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling10.1016/j.compositesa.2017.02.017 ↗
79. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
80. Multiscale architecture and superior high-temperature performance of discontinuously reinforced titanium matrix composites