Softening and hardening on a Zr-based bulk metallic glass induced by nanosecond laser surface melting
Source abstract
Abstract
The study reported here confirms that laser surface melting (LSM) can be employed to modify the hardness and the shear banding behaviour of bulk metallic glasses (BMGs). More specifically, by conducting LSM operations on the Zr-based Vitreloy 105 BMG in ambient atmosphere using a nanosecond laser, it was found that surface hardening can be achieved, in addition to the well-known surface softening effect. Besides, it was found that the presence of compressive residual stress and an increased introduction of crystalline precipitates accompanied LSM-induced surface hardening. On the contrary, tensile residual stress and a reduced fraction of crystalline precipitates were observed for a softened surface post-LSM. Finally, differences in shear-banding mechanisms were detected near the surface of the laser irradiated regions. More specifically, overall reduced serrated flow but important surface shear bands events were observed following the LSM-based introduction of compressive residual stress. In contrast, more pronounced serrated flows and the likely distribution of shear banding activity well beneath the irradiated BMG surface was promoted when LSM resulted in the introduction of tensile residual stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A brief overview of bulk metallic glasses10.1038/asiamat.2011.30 ↗
2. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
3. Bulk metallic glasses10.1016/S0966-9795(03)00046-3 ↗
4. Mechanical properties of bulk metallic glasses10.1016/j.pmatsci.2010.04.002 ↗
5. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
6. Making metallic glasses plastic by control of residual stress10.1038/nmat1758 ↗
7. Recent advances in bulk metallic glasses for biomedical applications10.1016/j.actbio.2016.03.047 ↗
8. The case for bulk metallic glass10.1016/S1369-7021(04)00124-5 ↗
9. Influence of the shot-peening intensity on the structure and near-surface mechanical properties of Ti40Zr10Cu38Pd12 bulk metallic glass10.1063/1.4833017 ↗
10. Superior tensile ductility in bulk metallic glass with gradient amorphous structure10.1038/srep04757 ↗
11. Effect of laser shock peening on the compressive deformation and plastic behavior of Zr-based bulk metallic glass10.1016/j.optlaseng.2016.05.014 ↗
12. Induced multiple heterogeneities and related plastic improvement by laser surface treatment in CuZr-based bulk metallic glass10.1016/j.intermet.2012.01.022 ↗
13. Influence of laser surface melting treatment on the surface composition and mechanical properties of a Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glass10.1016/j.jnoncrysol.2018.02.029 ↗
14. Optimization of mechanical properties of bulk metallic glasses by residual stress adjustment using laser surface melting10.1016/j.scriptamat.2012.02.046 ↗
15. Size-dependent enhancement of plasticity by laser surface melting in Zr55Al10Ni5Cu30 bulk metallic glass10.1016/j.jallcom.2015.10.221 ↗
16. Improvement in mechanical properties of a Zr-based bulk metallic glass by laser surface treatment10.1016/j.jallcom.2010.04.053 ↗
17. Softening of Zr-based metallic glass induced by nanosecond pulsed laser irradiation10.1016/j.jallcom.2018.04.278 ↗
18. Tensile plasticity in monolithic bulk metallic glass with sandwiched structure10.1016/j.jallcom.2016.07.243 ↗
19. Evolution of microstructure in Zr55Cu30Al10Ni5 bulk amorphous alloy by high power pulsed Nd:YAG laser10.1016/j.jallcom.2009.06.008 ↗
20. Influence of pulse laser irradiation on structure and mechanical properties of amorphous Fe73.1Nb3Cu1.0Si15.5B7.4 alloy
21. The coupling effects of laser thermal shock and surface nitridation on mechanical properties of Zr-based metallic glass10.1016/j.jallcom.2018.08.195 ↗
22. A review of micro-scale focused ion beam milling and digital image correlation analysis for residual stress evaluation and error estimation10.1016/j.surfcoat.2015.10.049 ↗
23. Laser shock peening on Zr-based bulk metallic glass and its effect on plasticity: experiment and modeling10.1038/srep10789 ↗
24. Evolution of residual stress, free volume, and hardness in the laser shock peened Ti-based metallic glass10.1016/j.matdes.2016.09.017 ↗
25. Experimental and modelling characterisation of residual stresses in cylindrical samples of rapidly cooled bulk metallic glass10.1016/j.matdes.2016.05.017 ↗
26. Effect of residual stresses on the hardness of bulk metallic glasses10.1016/j.actamat.2011.01.025 ↗
27. Effect of oxygen impurity on crystallization of an undercooled bulk glass forming Zr–Ti–Cu–Ni–Al alloy10.2320/matertrans1989.38.473 ↗
28. Microstructure and ductile–brittle transition of as-cast Zr-based bulk glass alloys under compressive testing10.1016/S0921-5093(01)01260-6 ↗
29. A state-of-the-art review of micron-scale spatially resolved residual stress analysis by FIB-DIC ring-core milling and other techniques10.1177/0309324715596700 ↗
30. Eberl · 2019
31. An investigation of residual stress gradient effects in FIB-DIC micro-ring-core analysis
32. Carbon-nanotube-reinforced Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass composites10.1063/1.1530371 ↗
33. Wear resistance of amorphous alloys and related materials10.1179/095066001225001067 ↗
34. Noyan · 2013
35. Applicability of Johnson-Mehl-Avrami model to crystallization kinetics of Zr60Al15Ni25 bulk amorphous alloy10.1016/S1003-6326(08)60025-4 ↗
36. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
37. Influences of sample preparation on nanoindentation behavior of a Zr-based bulk metallic glass10.3390/ma5061033 ↗
38. Serrated plastic flow during nanoindentation of a bulk metallic glass10.1016/S1359-6462(01)01116-2 ↗
39. Influence of indenter geometry on the deformation behavior of Zr60Cu30Al10 bulk metallic glass during nanoindentation10.2320/matertrans.MJ200752 ↗
40. Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending – a nanoindentation and atomic force microscopy study10.1016/j.actamat.2014.01.053 ↗
41. Stress-induced softening and hardening in a bulk metallic glass10.1016/j.scriptamat.2008.08.021 ↗