Continuous multi-cycle nanoindentation behavior of a gradient nanostructured metastable β titanium alloy fabricated by rotationally accelerated shot peening
Source abstract
Abstract
Abstract A novel gradient nanostructured structure fabricated by rotationally accelerated shot peening (RASP) has been proven useful in the enhancement of strength and ductility. In this study, a series of nanoindentation tests using continuous multi-cycle (CMC) mode are first used to characterize the nanoindentation behavior of the RASP-processed metastable β titanium alloy with a gradient nanostructured structure. The experimental results indicate that indentation depth and grain size paly a dominant role in the nanoindentation behavior. Inverse indentation size effect (ISE) on the hardness occurs at shallow indentation depth ( 225 nm), which is dominated by the known strain gradient mechanism. The hardness, reduced module and back stress decrease from the treated surface with a nanostructured grain size of 20 nm to the center zone with a coarse grain size of 216 μm. For the RASP-processed sample, the fine grain zone exhibits a more pronounced inverse and normal ISEs than these of the coarse grain zone. In addition, the Bauschinger effect and back stress strengthening mechanism are also firstly used to explain the variation of gradient micro-mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Surface Treatment and Residual Stress · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
3. Extra strengthening and work hardening in gradient nanotwinned metals10.1126/science.aau1925 ↗
4. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
5. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
6. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
7. Gradient plasticity in gradient nano-grained metals10.1016/j.eml.2015.12.005 ↗
8. Mechanical properties and optimal grain size distribution profile of gradient grained nickel10.1016/j.actamat.2018.04.065 ↗
9. Mechanically-induced grain coarsening in gradient nano-grained copper10.1016/j.actamat.2016.12.006 ↗
10. Surface nanocrystallization (SNC) of metallic materials-presentation of the concept behind a new approach
11. Strain rate sensitivity of the ultrastrong gradient nanocrystalline 316L stainless steel and its rate-dependent modeling at nanoscale10.1016/j.ijplas.2020.102696 ↗
12. Indentation size effect of stress exponent and hardness in homogeneous duplex eutectic 80Au/20Sn10.1016/j.matlet.2014.01.066 ↗
13. Indentation size effect in unirradiated and ion-irradiated 800H steel at high temperatures10.1016/j.actamat.2017.11.001 ↗
14. Multi-cycling instrumented nanoindentation of a Ti-23Nb-0.7 Ta-2Zr-1.2 O alloy in annealed condition10.1016/j.msea.2017.05.004 ↗
15. Indentation size effect on hardness in the body-centered cubic coarse-grained and nanocrystalline tantalum10.1016/j.msea.2017.01.033 ↗
16. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
17. The correlation of the indentation size effect measured with indenters of various shapes10.1016/S0022-5096(01)00103-X ↗
18. Indentation size effect in MgO10.1016/j.scriptamat.2004.05.034 ↗
19. Structural inhomogeneity and strain rate dependent indentation size effect in Zr-based metallic glass10.1016/j.msea.2015.12.083 ↗
20. Nano-indentation in FCC metals: experimental study10.1007/s00707-009-0151-x ↗
21. Size effects in nanoindentation: an experimental and analytical study10.1007/s00707-009-0222-z ↗
22. Gradient structured copper by rotationally accelerated shot peening10.1016/j.jmst.2016.11.006 ↗
23. Dense dispersed shear bands in gradient-structured Ni10.1016/j.ijplas.2019.08.012 ↗
24. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
25. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
26. Enhancing grain refinement in polycrystalline materials using surface mechanical attrition treatment at cryogenic temperatures10.1016/j.scriptamat.2013.05.036 ↗
27. Strain rate effects on tensile deformation behaviors of Ti-10V-2Fe-3Al alloy undergoing stress-induced martensitic transformation10.1016/j.msea.2017.10.057 ↗
28. Achieving gradient martensite structure and enhanced mechanical properties in a metastable β titanium alloy10.1007/s11661-019-05157-5 ↗
29. Effect of strain reversal on the stress-induced martensitic transformation and tensile properties of a metastable β titanium alloy10.1016/j.jallcom.2019.01.010 ↗
30. Cyclic deformation induced strengthening and unusual rate sensitivity in Cu/Ru nanolayered films10.1016/j.ijplas.2017.08.005 ↗
31. Effect of grain size on the strain rate sensitivity of CoCrFeNi high-entropy alloy
32. Depth-sensing indentation-based studies of surface mechanical behavior and fatigue damage evolution of an austenitic stainless steel subjected to cyclic straining10.1016/j.msea.2015.10.024 ↗
33. Effect of heat treatment on the microstructure and micro-mechanical behavior of quenched Ti-6Al-4V alloy10.1007/s11665-015-1682-z ↗
34. Measurement of residual stresses using nanoindentation method10.1080/10408436.2014.940442 ↗
35. Estimation of residual stresses from elastic recovery of nanoindentation10.1080/14786430600627277 ↗
36. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
37. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
38. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
39. Effects of loading strain rate and stacking fault energy on nanoindentation creep behaviors of nanocrystalline Cu, Ni-20 wt.% Fe and Ni10.1016/j.jallcom.2015.06.094 ↗
40. Nanoindentation and the indentation size effect: kinetics of deformation and strain gradient plasticity10.1016/S0022-5096(02)00033-9 ↗
41. Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro-and nano-indentation experiments10.1016/j.ijplas.2003.10.007 ↗
42. Experimental nanoindentation of BCC metals10.1016/j.mechrescom.2010.02.001 ↗
43. Small-scale mechanical behavior of a eutectic high entropy alloy
44. Strain rate dependence of the indentation size effect in Ti–10V–2Fe–3Al alloy10.1080/02670836.2019.1612596 ↗