Strain aging characterization and physical modelling of over-aging in dual phase steel
Source abstract
Abstract
Abstract This study presents an integrated work of experimental investigations and physical modeling of bake hardening (BH) response in dual-phase steel (DP). A DP steel with a martensite volume percentage of 22% was produced by intercritical annealing followed by quenching in brine. Aging experiments with up to 5% pre-straining were carried out in the temperature range of 100 to 220 °C, for 2 to 2·104 min at temperature. The DP steel was characterized using light optical, scanning electron and transmission electron microscopy. The pinning effect of the dislocations was revealed by atom probe tomographic analysis. The increase in the yield strength accompanying the aging phenomenon, measured using tensile tests, showed a two-step increase, followed by an over-aging stage. The dependence of the time-interval of each stage on the pre-strain value and aging temperature was analyzed. A physical-based model for interpreting the over-aging stage in DP steel was developed. A new concept for over-aging, correlating it to carbon-diffusion from ferrite to martensite due to the gradient in the chemical potential at the interface between the two phases, was introduced. This diffusion causes a partial dissolution of the already formed Cottrell atmosphere/carbide precipitates. Finally, the time required for the onset of over-aging, calculated using physical simulations, was compared with experimental results showing a good matching between experiment and simulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Ma · 2009
2. Influence of microstructure and pre-straining on the bake hardening response for ferrite-martensite dual-phase steels of different grades10.1016/j.msea.2017.09.127 ↗
3. Static strain aging phenomena in cold-rolled dual-phase steels10.1007/s11661-003-1006-z ↗
4. The influence of microstructure and composition on the plastic behaviour of dual-phase steels10.1016/j.actamat.2014.04.015 ↗
5. Microstructure-mechanical property relationships of dual-phase steel wire10.1007/BF02814834 ↗
6. Fonstein · 2015
7. An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design10.1146/annurev-matsci-070214-021103 ↗
8. Mechanical behavior of strain aged dual phase steels
9. Bake-hardening response of high Martensite dual-phase steel with different morphologies and volume fractions10.1007/s40195-014-0043-5 ↗
10. The effect of bake-hardening parameters on the mechanical properties of dual-phase steels10.1002/srin.201600060 ↗
11. Influence of hot working parameters on microstructure evolution, tensile behavior and strain aging potential of bainitic pipeline steel10.1016/j.matdes.2015.09.040 ↗
12. Tensile properties and bake hardening response of dual phase steels with varied martensite volume fraction10.1016/j.msea.2020.139044 ↗
13. 2011
14. Stahl – Bestimmung der Streckgrenzenerhöhung durch Wärmebehandlung (Bake-Hardening-Index)
15. Strength of mixtures of bainite and Martensite
16. Phase-hardening and phase softening phenomena in dual-phase steels
17. Twinning and martensitic transformation10.1051/jphyscol:1974705 ↗
18. The tempering behavior of a plain carbon dual-phase steel10.1016/1044-5803(90)90010-H ↗
19. A transmission electron microscopy and atom-probe tomography study of martensite morphology and composition in a dual-phase steel10.1016/j.matchar.2020.110207 ↗
20. Effect of bake‐hardening on the structure‐property relationship of multiphase steels for the automotive industry
21. Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels10.1007/s11661-999-0269-4 ↗
22. The contribution of atmosphere locking to the strain-ageing10.1016/0001-6160(60)90138-3 ↗
23. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
24. Kinetics of Snoek ordering and Cottrell atmosphere formation in Fe-N single crystals10.1016/0001-6160(67)90370-7 ↗
25. On the mechanism of bake-hardening10.1002/srin.199301049 ↗
26. Strain ageing under stress in an Fe-0.01 wt% C alloy10.1179/cmq.1969.8.2.97 ↗
27. Calculability of the bake hardening effect of hot rolled multiphase steels10.1002/srin.200505987 ↗
28. Static strain ageing behaviour of dual phase steels10.1016/j.msea.2007.08.056 ↗
29. Rubianes · 1994 · 111
30. Effect of prestrain on aging and bake hardening of cold-rolled, continuously annealed steel sheets10.1007/s11661-998-0126-x ↗
31. Effects of quenching and tempering on the microstructure and bake hardening behavior of ferrite and dual phase steels10.1016/j.msea.2014.06.100 ↗
32. Characterization of the bake-hardening behavior of transformation induced plasticity and dual-phase steels using advanced analytical techniques10.2355/isijinternational.50.574 ↗
33. In structure and properties of dual phase steels
34. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
35. Timokhina · 2008 · 26
36. Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques10.1016/j.matdes.2017.09.065 ↗
37. In Chapter two of Phase transformations in steels volume 2: Diffusionless transformations, high strength steels, modelling and advanced analytical techniques
38. Tempering of low-carbon martensite
39. Co-segregation of boron and carbon atoms at dislocations in steel10.1016/j.jallcom.2017.07.096 ↗
40. Modelling for hydrogen diffusion in metals with traps revisited10.1016/j.actamat.2011.11.025 ↗
41. Evolution of precipitates and martensite substructure during continuous heat treatment10.1016/j.matpr.2015.07.360 ↗