Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel
Source abstract
Abstract
Abstract The austenitic stainless steel 304 L was subjected to severe plastic deformation using high-pressure torsion technique at room temperature. The severe plastic deformation led not only to the grain size reduction but also to the transformation of austenite into deformation-induced martensite. At high imposed strains the martensitic boundaries disappeared and misorientation distribution exhibited nearly random misorientation distribution. The thermal exposure and tensile creep tests under constant load performed at 923 K and stresses ranging from 50 to 150 MPa revealed that austenitic microstructure contains σ phase. The ultrafine-grained microstructure coarsens during creep testing but the mean grain size is significantly finer than the predicted stationary subgrain. The results demonstrate that during creep testing new grains at precipitates of σ phase are formed and texture changes. The formation of new grains during creep keeps the microstructure of being ultrafine-grained and thus grain boundary mediated processes are enhanced in this steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Bulk nanostructured materials from severe plastic materials10.1016/S0079-6425(99)00007-9 ↗
2. Producing bulk ultrafine-grained materials by severe plastic deformation
3. Ultra-severe plastic deformation: evolution of microstructure, phase transformation and hardness in immiscible magnesium-based systems10.1016/j.msea.2017.06.076 ↗
4. Metallurgical alchemy by ultra-severe plastic deformation via high-pressure torsion process10.2320/matertrans.MF201914 ↗
5. Effect of strain path on severely deformed aluminium10.1016/j.matlet.2016.05.163 ↗
6. Bulk-state reactions and improving the mechanical properties of metals through high-pressure torsion10.2320/matertrans.MF201908 ↗
7. High-pressure torsion deformation induced phase transformations and formations: new material combinations and advanced properties10.2320/matertrans.MF201930 ↗
8. The limits of refinement by severe plastic deformation
9. Saturation of fragmentation during severe plastic deformation10.1146/annurev-matsci-070909-104445 ↗
10. Creep in ultrafine grained aluminium10.1016/j.msea.2004.01.111 ↗
11. Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing10.1016/j.actamat.2008.01.023 ↗
12. The characteristics of creep in metallic materials processed by severe plastic deformation10.2320/matertrans.MF201924 ↗
13. A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall–Petch strengthening and enhanced strain rate sensitivity10.1016/j.actamat.2008.12.041 ↗
14. Effect of grain refinement by ECAP on creep of pure Cu10.1016/j.msea.2013.10.022 ↗
15. Transition from strengthening to softening by grain boundaries in ultrafine-grained Cu10.1016/j.actamat.2004.07.003 ↗
16. Strain rate contribution due to dynamic recovery of ultrafine-grained Cu–Zr as evidenced by load reductions during quasi-stationary deformation at 0.5 Tm10.3390/met9111150 ↗
17. A compilation and analysis of data for the stress dependence of the subgrain size10.1016/0025-5416(86)90265-X ↗
18. In situ study of microstructure and strength of severely predeformed pure Cu in deformation at 573 K10.1080/14786435.2015.1096025 ↗
19. Dynamic restoration of severely predeformed, ultrafine-grained pure Cu at 373 K observed in situ10.1016/j.matchar.2017.11.006 ↗
20. The formation of PSB-like shear bands in cyclically deformed ultrafine grained copper processed by ECAP10.1016/S1359-6462(03)00141-6 ↗
21. Cyclic deformation and fatigue properties of very fine grained metals and alloys10.1016/j.ijfatigue.2009.10.007 ↗
22. Microstructural evolution and creep of an Al-0.2 wt.% Sc alloy after equal-channel angular pressing
23. Microstructure and creep behaviour of P92 steel after HPT10.1016/j.msea.2018.03.059 ↗
24. The effect of ultrafine-grained microstructure on creep behaviour of 9% Cr steel10.3390/ma11050787 ↗
25. Sigma phase precipitation in austenitic steels
26. Property evolution on annealing deformed 304 austenitic stainless steel10.1007/s10853-012-6708-4 ↗
27. Effect of intermetallic precipitations on the properties of duplex stainless steel10.1016/j.matchar.2006.03.015 ↗
28. The effect of -phase formation on long-term durability of welding joints in SUPER 304H Steels10.12693/APhysPolA.130.960 ↗
29. Effect of sigma phase morphology on the degradation of properties in a super duplex stainless steel10.3390/ma11060933 ↗
30. Annealing of cold-worked austenitic stainless steels10.2355/isijinternational.43.135 ↗
31. Optimal chemical composition in Fe-Cr-Ni alloys for ultra grain refining by reversion from deformation induced martensite10.2355/isijinternational.31.721 ↗
32. Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process10.1016/j.msea.2010.08.002 ↗
33. Effect of grain refinement and predeformation impact by severe plastic deformation on creep of P92 martensitic steel
34. What does it mean to be special? The significance and application of the Brandon criterion10.1007/s10853-006-0665-8 ↗
35. Frost · 1982
36. Phase transformations induced by severe plastic deformation10.2320/matertrans.MF201938 ↗
37. Processing pure Ti by high-pressure torsion in wide ranges of pressures and strain
38. Phase transformation and annealing behavior of SUS 304 austenitic stainless steel deformed by high pressure torsion10.4028/www.scientific.net/MSF.654-656.334 ↗
39. Formation of martensite in austenitic stainless steel-effect of deformation, temperature, and composition
40. Composition and grain-size dependencies -induced martensitic transformation in metastable austenitic stainless steels10.2355/tetsutohagane1955.63.5_772 ↗
41. Phase transformations induced by severe plastic deformation10.2320/matertrans.MF201938 ↗
42. Processing pure Ti by high-pressure torsion in wide ranges of pressures and strain10.1007/s11661-009-9890-5 ↗
43. Allotropic phase transformation of pure zirconium by high-pressure torsion10.1016/j.msea.2009.07.029 ↗
44. High-pressure torsion of hafnium10.1016/j.msea.2009.11.060 ↗
45. High-resolution transmission electron microscopy analysis of nanograined germanium produced by high-pressure torsion10.1016/j.matchar.2017.08.011 ↗
46. Phase transformation and nanograin refinement of silicon by processing through high-pressure torsion10.1063/1.4754574 ↗
47. Über den Mechanismus der Stahlhärtung10.1007/BF01397346 ↗
48. Mechanism of transformation from face-centred to body-centred cubic lattice
49. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
50. Some strengthening methods for austenitic stainless steels10.1002/srin.200806146 ↗
51. Influence of thermomechanical treatments on microstructural stability of titanium modified austenitic stainless steel10.1179/mst.1996.12.4.338 ↗
52. Overview of intermetallic sigma (σ) phase precipitation in stainless steels
53. Creep study of mechanisms involved in low-temperature superplasticity of UFG Ti-6Al-4V processed by SPD10.1016/j.matchar.2016.04.007 ↗
54. Grain boundary sliding and stress concentration during creep10.1007/BF02643771 ↗
55. Study of embrittlement in austenitic stainless steel AISI 304H with 15 years in service exposed to high temperature
56. High-strain rate superplasticity and role of dynamic recrystallization in a superplastic duplex stainless steel10.2320/matertrans1989.31.983 ↗
57. Superplastic deformation and dynamic recrystallization of a novel disc superalloy GH415110.3390/ma12223667 ↗
58. Creep behavior of Al-2.2at%Mg alloy at 573 K10.2320/matertrans1960.19.611 ↗
59. Understanding creep-a review10.1007/s11661-002-0090-9 ↗
60. Compressive creep in an Al-3%Mg-0.2%Sc alloy processed by equal-channel angular pressing
61. Analysis of the creep strength of a low-carbon AISI 304 steel with low-Σ grain boundaries10.1016/S0921-5093(02)00903-6 ↗
62. The effect of varying degrees of cold work on the stress-rupture properties of type 304 stainless steel10.1115/1.3443303 ↗
63. Austenitic stainless steels
64. Super plasticity solution alloys and Newtonian-viscous flow in fine-grained class I solid solution alloys10.2355/isijinternational.31.76 ↗