journal article·2020-05Open access

Creep of a thermally stable nanocrystalline nickel tungsten alloy as measured by high temperature nanoindentation

Prince S. Singh, Zhiyuan Liang, George M. Pharr, Maarten P. de Boer

Abstract

The creep behavior of pure nanocrystalline (nc) fcc metals has not been studied above 200 °C because the nanoscale grains tend to grow at temperatures moderately above ambient. In this work, we study the creep of nanocrystalline Ni–W (nc Ni–W) up to 450 °C, near its thermal stability limit. A nanoindenter with the capability to heat both the specimen and the indenter tip addresses the issue of heat flow and provides more accurate test temperatures when compared to heating only the specimen. Creep experiments are performed on a nc Ni–W film (grain size ~15 nm) at 300, 350, 400 and 450 °C using the constant load and hold (CLH) method combined with the constant stiffness measurement (CSM) technique in which the peak load is maintained at a constant level. No grain growth occurs even at the highest temperature and highest stress. We conduct an analysis that accounts for the effect of the oscillating loads used in this combined CLH-CSM technique on creep. We find that nc Ni–W exhibits negligible creep at 300 °C, and that at 350 °C, creep in nc Ni–W is three orders of magnitude smaller than creep in pure nc Ni at 100 °C. The creep response of nc Ni–W differs significantly from that predicted by the standard Coble creep model and is attributed to the dislocation–grain boundary interaction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
2. Kinetic instability of nanocrystalline aluminum prepared by chemical synthesis; facile room-temperature grain growth10.1021/ja981972y ↗
3. On the room-temperature grain growth in nanocrystalline copper10.1016/0956-716X(94)90432-4 ↗
4. Thermal stability of nanocrystalline Ni10.1016/0921-5093(95)09864-X ↗
5. Nanocrystalline nickel and nickel-copper alloys: synthesis, characterization, and thermal stability10.1557/JMR.1998.0169 ↗
6. High temperature nanoindentation: the state of the art and future challenges10.1016/j.cossms.2015.02.002 ↗
7. A direct comparison of high temperature nanoindentation creep and uniaxial creep measurements for commercial purity aluminum10.1016/j.actamat.2016.03.032 ↗
8. Hot nanoindentation in inert environments10.1063/1.3436633 ↗
9. Finite element simulation of hot nanoindentation in vacuum10.1007/s11340-012-9700-7 ↗
10. Interpretation of the creep behavior of nanocrystalline nickel in terms of dislocation accommodated boundary sliding10.1007/s11661-006-1050-6 ↗
11. Low temperature compressive creep in electrodeposited nanocrystalline nickel10.1016/j.scriptamat.2005.06.035 ↗
12. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni10.1016/j.actamat.2006.02.013 ↗
13. Flow stress and creep rate of nanocrystalline Ni10.1016/j.scriptamat.2007.04.041 ↗
14. Creep behavior of nanocrystalline nickel at 290 and 373 K10.1016/S0921-5093(00)01385-X ↗
15. Grain boundary segregation and thermodynamically stable binary nanocrystalline alloys10.1103/PhysRevB.79.094112 ↗
16. Tailoring and patterning the grain size of nanocrystalline alloys10.1016/j.actamat.2006.08.032 ↗
17. Grain growth behavior at absolute zero during nanocrystalline metal indentation10.1063/1.2352725 ↗
18. Experimental quantification of mechanically induced boundary migration in nanocrystalline copper films10.1016/j.actamat.2017.08.022 ↗
19. Grain coarsening during compression of bulk nanocrystalline nickel and copper10.1016/j.scriptamat.2007.08.042 ↗
20. Grain boundary – mediated plasticity in nanocrystalline nickel10.1126/science.1098741 ↗
21. High-pressure torsion-induced grain growth in electrodeposited nanocrystalline Ni10.1063/1.2159088 ↗
22. Dislocation theory and transient creep
23. Diffusional viscosity of a polycrystalline solid10.1063/1.1699681 ↗
24. Frost · 1982
25. A model for boundary diffusion controlled creep in polycrystalline materials10.1063/1.1702656 ↗
26. Interface reaction controlled diffusional creep: a consideration of grain boundary dislocation climb sources10.1016/0025-5416(72)90060-2 ↗
27. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
28. Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement10.1557/jmr.2009.0096 ↗
29. An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures10.1557/jmr.2013.39 ↗
30. Nanoindentation creep of single-crystal tungsten and gallium arsenide
31. Strain rate sensitivity of the nanoindentation creep of Ag, Cu, and Ni thin films
32. High-strength nanocrystalline Ni-alloys produced by electrodeposition
33. Cullity · 1978
34. Grain boundary relaxation strengthening of nanocrystalline Ni-W alloys10.1557/jmr.2012.55 ↗
35. Measurement of power-law creep parameters by instrumented indentation methods10.1016/j.jmps.2012.09.009 ↗
36. Monitoring time-dependent deformation in small volumes10.1557/PROC-239-325 ↗
37. Method for continuous determination of the elastic stiffness of contact between two bodies
38. A micro-indentation study of superplasticity in Pb, Sn, and Sn-38 wt% Pb10.1016/0001-6160(88)90319-7 ↗
39. An investigation of the creep processes in tin and aluminum using a depth-sensing indentation technique10.1557/JMR.1992.0627 ↗
40. Indentation power-law creep of high-purity indium10.1007/s11661-999-0051-7 ↗
41. Nano-scale indentation creep testing at non-ambient temperature10.1080/00218469808011105 ↗
42. Microstructural length-scale effects in the nanoindentation behavior of thin gold films10.1016/j.actamat.2005.11.025 ↗
43. Grain growth stagnation and texture development in an irradiated thermally stabilized nanocrystalline alloy10.1063/1.5118943 ↗
44. Baker · 1992
45. Ni-W electrodeposited coatings: characterization, properties and applications10.1016/j.surfcoat.2016.09.052 ↗
46. Phase diagram of Ni-W (nickel-tungsten) system
47. Understanding nanoindentation unloading curves10.1557/JMR.2002.0386 ↗
48. Indentation of a power law creeping solid
49. The relationship between indentation and uniaxial creep in amorphous selenium10.1557/JMR.1995.2024 ↗
50. On the measurement of power law creep parameters from instrumented indentation
51. Analysis of indentation-derived power-law creep response10.1007/s11665-016-1934-6 ↗
52. Experimental and numerical study of the method to determine the creep parameters from the indentation creep testing10.1016/j.msea.2006.11.098 ↗
53. Impression creep of lead10.1557/JMR.1994.0903 ↗
54. On the grain size softening in nanocrystalline materials10.1016/S1359-6462(00)00320-1 ↗
55. The activation energy of dislocation movement10.1002/pssb.19650080209 ↗
56. On the validity of the hall-petch relationship in nanocrystalline materials10.1016/0036-9748(89)90342-6 ↗
57. Characterisation of the microstructure of nanophase Ni: a molecular dynamics simulation study10.1016/S0965-9773(99)00203-2 ↗
58. Interdiffusion and growth of the phases in CoNi/Mo and CoNi/W systems10.1007/s11661-011-0990-7 ↗
59. Porter · 2004
60. Grain-boundary sliding in nanocrystalline fcc metals10.1103/PhysRevB.64.224105 ↗
61. The thermally activated deformation of crystalline materials10.1002/pssb.19690340102 ↗
62. A model for the effect of grain size on the yield stress of metals
63. Deformation of electrodeposited nanocrystalline nickel10.1016/S1359-6454(02)00421-4 ↗
64. In-situ TEM tensile testing of DC magnetron sputtered and pulsed laser deposited Ni thin films10.1016/S1359-6454(02)00599-2 ↗
65. A deformation mechanism based crystal plasticity model of ultrafine-grained/nanocrystalline FCC polycrystals10.1016/j.ijplas.2016.08.001 ↗
66. Time, stress, and temperature-dependent deformation in nanostructured copper: stress relaxation tests and simulations10.1016/j.actamat.2016.02.021 ↗
67. High-speed creep process mediated by rapid dislocation absorption in nanocrystalline Cu10.1063/1.3694005 ↗
68. Compressive behavior and rate-controlling mechanisms of ultrafine grained copper over wide temperature and strain rate ranges10.1016/j.mechmat.2013.02.003 ↗
69. Multi-temperature indentation creep tests on nanotwinned copper10.1016/j.ijplas.2018.01.016 ↗
70. Nanoindentation creep behavior and its relation to activation volume and strain rate sensitivity of nanocrystalline Cu10.1016/j.msea.2019.02.027 ↗