journal article·2020-03

Revealing the maximum microhardness and thickness of hardened layers for copper with various grain sizes

C.X. Ren, Q. Wang, J.P. Hou, Z.J. Zhang, H.J. Yang, Z.F. Zhang

Publisher page

Abstract

Abstract Surface strengthened Cu samples with ultra-fine grain (UFG), fine grain (FG), and coarse grain (CG) matrixes were prepared by cold-rolling, controlled annealing, and then treated by surface spinning strengthening (3S) to reveal the effect of grain size on the feature of the hardened layer. The results indicate that the maximum microhardness of the hardened layer was slightly affected by grain size. The thickness of the hardened layer is significantly influenced by grain size. When decreasing the grain size of matrix from CG to UFG, the thickness of the hardened layer displays an increasing then deceasing trend, and approaches in the highest thickness at FG.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel10.1016/S0142-1123(01)00205-5 ↗
2. Compound technology of manufacturing and multiple laser peening on microstructure and fatigue life of dual-phase spring steel10.1016/j.msea.2016.08.031 ↗
3. Improvement of low-cycle fatigue resistance in TWIP steel by regulating the grain size and distribution10.1016/j.actamat.2017.05.004 ↗
4. Influence of shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ8010.1016/j.scriptamat.2004.11.003 ↗
5. Effects of combined plasma-carburizing and shot-peening on fatigue and wear properties of Ti-6Al-4V alloy10.1016/j.surfcoat.2008.11.013 ↗
6. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility10.1016/j.actamat.2016.04.045 ↗
7. Glow discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment pressure10.1016/j.surfcoat.2005.07.073 ↗
8. Mechanical properties and microstructures of commercial-purity aluminum processed by rotational accelerated shot peening plus cold rolling
9. A gradient nanostructure generated in pure copper by platen friction sliding deformation10.1016/j.scriptamat.2016.02.007 ↗
10. Enhanced fatigue durability of Al–6Mg alloy by applying ultrasonic impact peening: Effects of surface hardening and reinforcement with AlCuFe quasicrystalline particles10.1016/j.msea.2012.11.061 ↗
11. The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons10.1016/j.triboint.2009.04.005 ↗
12. Three strategies to achieve uniform tensile deformation in a nanostructured metal10.1016/j.actamat.2003.12.022 ↗
13. Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution10.1016/j.msea.2018.03.099 ↗
14. Obtaining hexagon-shaped billets of copper with gradient structure by twist extrusion10.1016/j.matchar.2019.04.042 ↗
15. Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod10.1016/j.scriptamat.2016.05.006 ↗
16. Enhanced tensile and bending yield strengths of 304 stainless steel and H62 brass by surface spinning strengthening10.1016/j.msea.2019.03.113 ↗
17. Surface strengthening behaviors of four structural steels processed by surface spinning strengthening10.1016/j.msea.2017.08.007 ↗
18. Predicting surface deformation during mechanical attrition of metallic alloys10.1038/s41524-019-0171-6 ↗
19. Ultrafine gradient microstructure induced by severe plastic deformation under sliding contact conditions in copper10.1016/j.matchar.2018.02.017 ↗
20. Surface strengthening behaviors of pure Cu with heterogeneous microstructures10.1016/j.msea.2018.05.008 ↗
21. Inositol 1, 4, 5-tris-phosphate activation of inositol tris-phosphate receptor Ca2+ channel by ligand tuning of Ca2+ inhibition10.1073/pnas.95.26.15821 ↗
22. Effect of surface mechanical attrition treatment (SMAT) on microhardness, surface roughness and wettability of AISI 316L10.1016/j.matchemphys.2010.10.038 ↗
23. Study of the effects produced by shot peening on the surface of quenched and tempered steels: roughness, residual stresses and work hardening10.1016/j.apsusc.2015.08.110 ↗
24. Hall-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
25. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
26. Meyers · 2008
27. Kocks-Mecking analysis of the size effects on the mechanical behavior of nickel polycrystals10.1016/j.ijplas.2017.07.003 ↗
28. Modeling of the plastic deformation of nanostructured materials with grain size gradient10.1016/j.ijplas.2012.06.004 ↗
29. Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes10.1016/j.scriptamat.2017.08.034 ↗
30. Significance of stacking fault energy in bulk nanostructured materials: Insights from Cu and its binary alloys as model systems10.1016/j.pmatsci.2018.11.001 ↗
31. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
32. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni10.1016/j.actamat.2006.02.013 ↗
33. Influence of long term annealing on grain boundary character distributions in nickel10.1016/j.msea.2005.05.103 ↗