journal article·2020-02

Flash-butt welded Ti6242 joints preserved base-material strength and ductility

Pingwei Xu, Lei Zhou, Moliu Han, Zhijian Wei, Yu Liang

Publisher page

Abstract

Abstract Microstructure and mechanical properties of flash-butt welded two-phase Ti–6Al–2Sn–4Zr–2Mo (Ti6242) alloy are investigated. High ductility that is at least comparable to that of the matrix and extra strain hardening are achieved in welded joints because of the formation of a particular semi-equiaxed structure in the double-affected zone (DAZ). Also, no strength loss is observed, and this is attributed to a uniform hardness distribution in a narrower welding zone. The soft DAZ, which is sandwiched between welding seam and stress-affected zone, enables better deformation compatibility among these zones, and weakens their stress concentration. Furthermore, such semi-equiaxed structure effectively suppresses the formation of dense slip bands and crack nucleation and provides a strong barrier against its propagation. This work provides a new understanding of this particular microstructure, which is expected to have a higher combination of strength and ductility in Ti alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. High-temperature flow characterization and microstructural evolution of Ti6242 alloy: yield drop phenomenon10.1016/j.msea.2016.07.043 ↗
2. Flow characterization of a duplex near α ti6242 alloy through interrelation of microstructural evolution, 3D activation energy map, and processing map10.1002/adem.201500426 ↗
3. Effect of beam offset on microstructure and mechanical properties of dissimilar electron beam welded high temperature titanium alloys10.1016/j.matdes.2017.03.056 ↗
4. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
5. Beam oscillation, porosity formation and fatigue properties of electron beam welded Ti-6Al-4V alloy10.1016/j.jmatprotec.2018.10.040 ↗
6. Effect of trace solute hydrogen on the fatigue life of electron beam welded Ti-6Al-4V alloy joints10.1016/j.msea.2016.12.102 ↗
7. Mechanical properties and microstructure of laser welded Ti–6Al–2Sn–4Zr–2Mo (Ti6242) titanium alloy10.1016/j.msea.2016.02.068 ↗
8. Microstructure and tensile properties of laser beam welded Ti–22Al–27Nb alloys10.1016/j.matdes.2012.10.022 ↗
9. Microstructure characterization and mechanical properties of linear friction welded Ti-6Al-4V alloy10.1002/adem.200700034 ↗
10. Tool geometry optimization in friction stir spot welding of Al-steel joints10.1016/j.jmapro.2017.02.004 ↗
11. Joint formation and mechanical properties of back heating assisted friction stir welded Ti–6Al–4V alloy10.1016/j.matdes.2016.10.012 ↗
12. Microstructures and mechanical properties of flash butt welded high strength steel joints10.1016/j.matdes.2016.01.129 ↗
13. Microstructure evolution and mechanical properties of flash butt-welded Inconel 718 joints10.1016/j.msea.2018.01.104 ↗
14. Microstructure and mechanical property of linear friction welded nickel-based superalloy joint10.1016/j.matdes.2015.09.143 ↗
15. Effect of electron beam welding on the microstructures and mechanical properties of thick TC4-DT alloy10.1016/j.matdes.2011.09.004 ↗
16. Localized tensile strain distribution and metallurgy of electron beam welded Ti–5Al–5V–5Mo–3Cr titanium alloys10.1016/j.jmatprotec.2012.06.023 ↗
17. Laser welding of Ti6Al4V titanium alloys10.1016/j.jmatprotec.2008.08.026 ↗
18. Mechanical properties and microstructure of laser welded Ti–6Al–2Sn–4Zr–2Mo (Ti6242) titanium alloy10.1016/j.msea.2016.02.068 ↗
19. Effect of microstructure evolution of the lamellar alpha on impact toughness in a two-phase titanium alloy10.1016/j.msea.2016.09.017 ↗
20. Study of crack propagation mechanisms during Charpy impact toughness tests on both equiaxed and lamellar microstructures of Ti–6Al–4V titanium alloy10.1016/j.msea.2014.09.048 ↗
21. An experimental investigation on flash butt welded rails10.1016/j.engfailanal.2015.07.009 ↗
22. Microstructure characterization and mechanical properties of linear friction welded ti‐6Al‐4V alloy10.1002/adem.200700034 ↗
23. Characterization of deformation in primary α phase and crack initiation and propagation of TC21 alloy using in-situ SEM experiments10.1016/j.msea.2018.03.123 ↗
24. Crack initiation and mechanical properties of TC21 titanium alloy with equiaxed microstructure10.1016/j.msea.2013.08.012 ↗
25. Length-scale-dependent deformation and fracture behavior of Cu/X (X=Nb, Zr) multilayers: the constraining effects of the ductile phase on the brittle phase10.1016/j.actamat.2011.08.016 ↗
26. Further improvement in ductility induced by the refined hierarchical structures of pearlite10.1016/j.msea.2018.12.069 ↗
27. Strain hardening and ductility in a coarse-grain/nanostructure laminate material10.1016/j.scriptamat.2015.03.006 ↗