Detwinning behavior in commercial pure zirconium during orthogonal re-compression after pre-compression and annealing
Source abstract
Abstract
Abstract Twinning is an important plastic deformation mode for zirconium (Zr) and its alloys. Many researches have been carried out to investigate twinning related issues for Zr alloys. However, few study was reported on the detwinning in Zr alloys. In this work, pre-compression, orthogonal re-compression, and annealing were performed to investigate the deformation behavior of a commercial pure Zr (Zr702). Microstructure and texture evolution during deformation and annealing were examined by quasi-in situ electron backscatter diffraction (EBSD). It was found that {10–12} tensile twins were activated during pre-compression of Zr702 plate along rolling direction, while detwinning rather than secondary tensile twinning occurred when the pre-twinned sample was re-compressed along normal direction. Intermediate annealing between the pre-compression and the re-compression may hinder the subsequent detwinning. Moreover, the hindering effect was enhanced when larger pre-compression and longer annealing time were applied, which may be attributed to the annealing induced solute atoms precipitation and coherency loss of twinning boundary.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Nuclear Materials and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Nuclear applications zirconium alloy
2. Zirconium-an international nuclear material10.1016/0022-3115(81)90525-0 ↗
3. A model for texture development dominated by deformation twinning_ application to zirconium alloys10.1016/0956-7151(91)90083-D ↗
4. Effect of predeformation on microstructural evolution of a Zr alloy during 550–700°C aging after β quenching10.1016/j.actamat.2013.02.001 ↗
5. {11-21}-{10-12} double twinning in a Zircaloy-4 alloy during rolling at ambient temperature10.1016/j.scriptamat.2016.05.003 ↗
6. Grain fragmentation and twinning in deformed Zircaloy 2: response to positron lifetime measurements10.1016/j.msea.2009.10.066 ↗
7. Nucleation and growth of twins in Zr: a statistical study10.1016/j.actamat.2009.08.030 ↗
8. Twinning during β→α slow cooling in a zirconium alloy10.1016/j.scriptamat.2012.06.032 ↗
9. Isaenkova · 2015
10. Effect of intercritical annealing temperature on microstructure and mechanical properties of duplex Zr-2.5Nb alloy10.1016/j.jallcom.2018.10.320 ↗
11. Effect of texture on anisotropic creep of pressurized Zr-2.5Nb tubes
12. Influence of prior dislocation structure on anisotropy of thermal creep of cold-worked Zr–2.5Nb tubes10.1016/j.jnucmat.2011.02.044 ↗
13. Hydrogen in zirconium alloys: a review10.1016/j.jnucmat.2019.02.042 ↗
14. Phase analysis of hydride blister in zirconium alloy10.1016/j.jallcom.2017.11.359 ↗
15. A novel mechanism for nodular corrosion of Zircaloy-4 corroded in 773 K superheated steam10.1016/j.corsci.2017.06.007 ↗
16. Corrosion of zirconium and its alloys
17. The effect of final annealing after β-quenching on the corrosion resistance of Zircaloy-4 in lithiated water with 0.04M LiOH10.1016/j.jnucmat.2012.12.029 ↗
18. Development of thermomechanical processing method to enhance twinning in commercially pure Zr10.1016/j.scriptamat.2009.03.050 ↗
19. Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr10.1016/j.actamat.2015.01.037 ↗
20. Influence of texture and test velocity on the dynamic, high-strain, tensile behavior of zirconium10.1016/j.actamat.2012.05.001 ↗
21. Quantitative analysis of deformation twinning in zirconium10.1016/j.ijplas.2008.03.010 ↗
22. On the interaction between slip dislocations and twins in HCP Zr10.1016/j.msea.2009.01.035 ↗
23. Grain size effect on the thermally activated twin boundary migration in a zirconium alloy10.1016/j.msea.2018.03.118 ↗
24. Effect of pre-annealing deformation on thermally activated twin boundary migration in a zirconium alloy10.1016/j.jallcom.2018.01.288 ↗
25. Low cycle fatigue behavior of the textured AZ31B magnesium alloy under the asymmetrical loading10.1016/j.msea.2012.10.004 ↗
26. Detwinning of high-purity zirconium: in-situ neutron diffraction experiments10.1007/s11340-008-9213-6 ↗
27. Detwinning behavior of Mg–3Al–1Zn alloy at elevated temperatures10.1016/j.msea.2014.08.034 ↗
28. Annealing hardening in detwinning deformation of Mg–3Al–1Zn alloy10.1016/j.msea.2013.11.080 ↗
29. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
30. Tenckhoff · 1980
31. The influence of a secondary twin on the detwinning deformation of a primary twin in Mg–3Al–1Zn alloy10.1016/j.msea.2014.03.068 ↗
32. Effect of twin boundary–dislocation–solute interaction on detwinning in a Mg–3Al–1Zn alloy10.1016/j.jmst.2016.08.023 ↗
33. Effect of cold rolling on microstructure and mechanical properties of pure Zr10.1016/j.msea.2012.07.056 ↗
34. Effect of twin boundary segregation on damping properties in magnesium alloy10.1016/j.scriptamat.2016.10.019 ↗
35. Effect of dislocation-twin boundary interaction on deformation by twin boundary migration10.1016/j.msea.2016.03.061 ↗
36. {10-12} Twin variants selection mechanisms during twinning, re-twinning and detwinning10.1016/j.msea.2014.06.088 ↗