Effects of testing conditions on the deformation behaviour of a Ti-based bulk metallic glass
Source abstract
Abstract
This study investigated the deformation behaviour of a Ti32.8Zr30.2Ni5.3Cu9Be22.7 bulk metallic glass via indentation and compression tests with loading rate ranging from 30 μN/s to 30000 μN/s. The load-displacement (P-h) curves show evident displacement bursts (pop-in events). The statistic analysis reveals that the pop-in events are correlated to the loading rate, i.e., the pop-in size increasing linearly with the indentation depth and decreasing exponentially with the loading rate. Cube corner indenter with much sharper geometry favours the promoting of pronounced pop-in events, compared to Berkovich indenter. Similar loading rate effect can be observed in the micro-pillar compression tests. SEM observation of the deformed pillars reveals that the shear bands (along a ~50.7° plane with respect to the loading axis) initiate from the side wall and run across the entire pillars. The free-volume theory and shear transformation zone (STZ) are used to explain these observations quantitatively. The serration to smooth shape of P-h curves is most likely due to the simultaneous operation of multiple shear bands at high loading rate while the single shear band contribution could not be resolved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Test environments and mechanical properties of Zr-base bulk amorphous alloys10.1007/s11661-998-0004-6 ↗
2. Work-hardenable” ductile bulk metallic glass10.1103/PhysRevLett.94.205501 ↗
3. Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic properties10.1038/nmat982 ↗
4. Intrinsic shear strength of metallic glass10.1016/j.actamat.2010.11.046 ↗
5. Ductile bulk metallic glass10.1103/PhysRevLett.93.255506 ↗
6. On the hardness of shear bands in amorphous alloys10.1016/j.scriptamat.2009.07.037 ↗
7. Studies of shear band velocity using spatially and temporally resolved measurements of strain during quasistatic compression of a bulk metallic glass10.1016/j.actamat.2009.06.013 ↗
8. New regime of homogeneous flow in the deformation map of metallic glasses: elevated temperature nanoindentation experiments and mechanistic modelling10.1016/j.actamat.2004.09.005 ↗
9. A nanoindentation study of serrated flow in bulk metallic glasses10.1016/S1359-6454(02)00303-8 ↗
10. Nanoindentation studies of shear banding in fully amorphous and partially devitrified metallic alloys10.1016/j.msea.2003.10.032 ↗
11. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
12. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
13. Effect of the nanoindentation rate on the shear band formation in an Au-based bulk metallic glass10.1016/j.actamat.2006.08.028 ↗
14. Indentation of bulk metallic glasses: relationships between shear bands observed around the prints and hardness10.1016/j.actamat.2006.12.005 ↗
15. Unusual strain rate sensitivity of nanoscale amorphous CuZr/crystalline Cu multilayers10.1016/j.msea.2016.12.049 ↗
16. Composition mediated serration dynamics in Zr-based bulk metallic glasses10.1063/1.4935834 ↗
17. Serration dynamics in the presence of chemical heterogeneities for a Cu-Zr based bulk metallic glass10.1016/j.jallcom.2018.10.039 ↗
18. Low-temperature shear banding for a Cu-based bulk-metallic glass10.1016/j.scriptamat.2010.06.039 ↗
19. Tuned critical avalanche scaling in bulk metallic glasses10.1038/srep04382 ↗
20. Effect of size and base-element on the jerky flow dynamics in metallic glass10.1016/j.actamat.2013.10.023 ↗
21. Study of mechanical deformation in bulk metallic glass through instrumented indentation10.1016/S1359-6454(01)00263-4 ↗
22. Rate dependence of serrated flow in a metallic glass10.1557/JMR.2003.0103 ↗
23. Room temperature homogeneous ductility of micrometer-sized metallic glass10.1002/adma.201401123 ↗
24. Serrated plastic flow during nanoindentation of a bulk metallic glass10.1016/S1359-6462(01)01116-2 ↗
25. Effect of loading rate on the serrated flow of a bulk metallic glass during nanoindentation10.1016/j.actamat.2008.05.039 ↗
26. Effect of loading rate on creep behavior and shear transformation zone in amorphous alloy thin films, and its correlation with deformation mode transition10.1016/j.tsf.2019.04.050 ↗
27. A survey of instrumented indentation studies on metallic glasses10.1557/jmr.2004.19.1.46 ↗
28. Study of mechanical deformation in bulk metallic glass through instrumented indentation10.1016/S1359-6454(01)00263-4 ↗
29. Initial plasticity onset in Zr- and Hf-rich bulk metallic glasses during instrumented indentation10.1557/jmr.2007.0185 ↗
30. Deformation in a Zr57Ti5Cu20Ni8Al10 bulk metallic glass during nanoindentation10.1016/j.actamat.2006.06.063 ↗
31. Plastic deformation and mechanical softening of Pd40Cu30Ni10P20 bulk metallic glass during nanoindentation10.1557/JMR.2005.0331 ↗
32. Testing effects on hardness of a Zr-based metallic glass under nanoindentation10.1016/j.scriptamat.2017.05.046 ↗
33. Sample size matters for Al88Fe7Gd5 metallic glass: smaller is stronger10.1016/j.actamat.2012.06.019 ↗
34. Effect of sample size on deformation in amorphous metals10.1063/1.2884584 ↗
35. Structural changes and stress state effects during inhomogeneous flow of metallic glasses10.1016/j.scriptamat.2005.04.049 ↗
36. Effect of aspect ratio on the compressive deformation and fracture behaviour of Zr-based bulk metallic glass10.1080/09500830500395237 ↗
37. Theoretical strength and onset of plasticity in bulk metallic glasses investigated by nanoindentation with a spherical indenter10.1103/PhysRevLett.93.125504 ↗
38. Yield point of metallic glass10.1016/j.actamat.2006.05.024 ↗
39. Serrated plastic flow during nanoindentation in Nd-based bulk metallic glasses10.1016/j.intermet.2004.04.030 ↗
40. The effect of free volume on the deformation behaviour of a Zr-based metallic glass under nanoindentation10.1088/0022-3727/40/19/043 ↗
41. Nano-scratch behavior of a bulk Zr-10Al-5Ti-17.9Cu-14.6Ni amorphous alloy10.1557/JMR.2000.0130 ↗
42. Softening caused by profuse shear banding in a bulk metallic glass10.1103/PhysRevLett.96.105503 ↗
43. Initiation of shear bands near a stress concentration in metallic glass10.1016/j.actamat.2007.05.054 ↗
44. A three-parameter Weibull statistical analysis of the strength variation of bulk metallic glasses10.1016/j.scriptamat.2009.07.038 ↗
45. Origin of stress overshoot in amorphous solids10.1016/j.mechmat.2014.10.002 ↗
46. Mechanical behaviour of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
47. Rate dependence of serrated flow during nanoindentation of a bulk metallic glass10.1557/JMR.2002.0243 ↗
48. The transition from localized to homogeneous plasticity during nanoindentation of an amorphous metal10.1080/1478643031000118012 ↗
49. Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature10.1126/science.1067453 ↗
50. Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy10.1016/j.actamat.2005.04.003 ↗
51. Jiang · 2003 · vol. 93 · 9287
52. Transformation-mediated ductility in CuZr-based bulk metallic glasses10.1038/nmat2767 ↗