journal article·2019-10

Effect of microstructure evolution on mechanical properties of a TiZrAlB alloy rolled by different processes

S.G. Liu, B.H. Chen, H.L. Luo, S. Yang, X.Y. Zhang, M.Z. Ma, R.P. Liu

Publisher page

Abstract

Abstract For the development of structural titanium alloys with excellent mechanical properties, the effect of rolling temperature and cooling rate on phase composition, microstructure evolution, and mechanical properties in a full-α TiZrAlB alloy were investigated. Optical microscopy, scanning electron microscopy, transmission electron microscopy, and statistical analysis, were employed to further understand and control the processing-structure-property relationships. The experimental results of specimens rolled at a temperature range from the α to β phase region demonstrated a significant grain refinement trend as the rolling temperature increased, and the work hardening effect was stronger in specimens rolled at the α+β double phase region than those rolled in the single phase region. The high density of the original β grain boundaries also enhanced the mechanical properties when the specimens were rolled at temperatures around/above the β-transus temperature. The highest strength (σ0.2 = 1121 MPa and σb = 1387 MPa) with a failure elongation of 6.1% was obtained in 840 °C-rolling water-quenched specimens, however, the furnace cooling led to worsened mechanical properties. In sum, the variation in the mechanical properties of the series of rolled alloys was mainly ascribed to the microstructure evolution under the different rolling processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Correlation between atomic diffusivity and densification mechanism during spark plasma sintering of titanium alloy powders10.1016/j.jallcom.2019.02.002 ↗
2. A high Zr-containing Ti-based alloy with ultralow Young's modulus and ultrahigh strength and elastic admissible strain10.1016/j.msea.2016.08.038 ↗
3. A study of epitaxial growth behaviors of equiaxed alpha phase at different cooling rates in near alpha titanium alloy10.1016/j.actamat.2016.10.012 ↗
4. Ivasishin · Metall. Mater. Trans. A · 2003 · 34 · 14710.1007/s11661-003-0216-8 ↗
5. The structure and mechanical properties of as-cast Zr-Ti alloys10.1016/j.jallcom.2009.08.105 ↗
6. The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti-Zr system alloys for dental applications10.1016/j.msec.2013.09.032 ↗
7. Shape memory behavior in Ti-Zr alloys10.1016/j.scriptamat.2010.11.048 ↗
8. The orthorhombic α″ martensite transformation during water quenching and its influence on mechanical properties of Ti-41Zr-7.3Al alloy10.1016/j.intermet.2014.03.010 ↗
9. Effect of rolling temperature on microstructure and mechanical properties of a TiZrAl alloy10.1016/j.msea.2015.03.051 ↗
10. Effect of thermomechanical processing on evolution of various phases in Ti-Nb-Zr alloys10.1016/j.jallcom.2004.04.113 ↗
11. Effects of Y addition on microstructure and mechanical properties of Ti-25Zr alloys10.1016/j.msea.2019.01.096 ↗
12. Superelastic properties of biomedical (Ti-Zr)-Mo-Sn alloys10.1016/j.msec.2014.11.010 ↗
13. Study of microstructure evolution and strengthening mechanisms in novel TiZrAlB alloy10.1016/j.msea.2017.03.060 ↗
14. Influence of phase composition and microstructure on mechanical properties of hot-rolled Ti-χZr-4Al-0.005B alloys10.1016/j.jallcom.2018.04.043 ↗
15. Tailoring elastic admissible strain of TiZr alloy by cold rolling deformation10.1016/j.jallcom.2018.11.388 ↗
16. Optimization of phase composition and mechanical properties in Zr alloys by micro-alloying10.1016/j.matlet.2017.05.082 ↗
17. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
18. Influence of in content on physical properties of β-type TiNbZrIn powders prepared by mechanical alloying10.1016/j.vacuum.2018.02.020 ↗
19. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
20. Thermo-mechanical processing, microstructure and mechanical properties of TiZrB alloy10.1016/j.msea.2017.11.117 ↗
21. Dynamic recrystallization behavior of a biomedical Ti-13Nb-13Zr alloy10.1016/j.jmbbm.2015.12.025 ↗
22. The effects of V content on the microstructure and mechanical properties of hot rolled TiZr based alloys10.1016/j.jallcom.2015.12.199 ↗
23. The effect of quenching medium on the wear behaviour of a Ti–6Al–4V alloy10.1007/s10853-007-2298-y ↗
24. Effect of ageing treatment on the deformation behaviour of Ti-50.9 at.% Ni10.1016/j.actamat.2009.06.059 ↗
25. 1986 · 80
26. Martensitic transformation in Zr-Ti alloys10.1007/BF02665407 ↗
27. Modification of alpha morphology in Ti-6Al-4V by thermomechanical processing10.1007/BF02644991 ↗
28. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6Al-4V10.1016/j.msea.2014.07.086 ↗
29. Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: lamellar colonies evolution and tensile properties10.1016/j.matdes.2017.02.053 ↗
30. Charlie Kong, Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling10.1016/j.msea.2017.10.075 ↗
31. Micromechanical behavior and thermal stability of a dual-phase α+α’ titanium alloy produced by additive manufacturing10.1016/j.actamat.2018.09.050 ↗
32. Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy10.1016/j.actamat.2015.05.008 ↗
33. Study on the formation mechanism of α lamellae in a near β titanium alloy10.1016/j.pnsc.2016.06.009 ↗
34. Microstructure design and mechanical properties in a near-α Ti-4Mo alloy10.1016/j.actamat.2015.06.043 ↗
35. The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure10.1016/S1359-6454(01)00236-1 ↗
36. Grain refinement and tensile properties of a metastable TiZrAl alloy fabricated by stress-induced martensite and its reverse transformation10.1016/j.msea.2018.02.104 ↗
37. Nucleation and growth mechanism of α-lamellae of Ti alloy TA15 cooling from an α + β phase field10.1016/j.actamat.2012.12.025 ↗
38. Crystallographic and morphological relationships between β phase and the Widmanstätten and allotriomorphic α phase at special β grain boundaries in an α/β titanium alloy10.1016/j.actamat.2007.08.029 ↗
39. Specific analysis of EBSD data to study the texture inheritance due to the β → α phase transformation10.1023/A:1022842712172 ↗