journal article·2019-07

Effect of quenching rate and its coupling model on precipitation and strength of Al–Cu–Cd alloys

Sheng Luo, Gang Wang, Yisen Hu, Yu Zhong, Yiming Rong

Publisher page

Abstract

Abstract The mechanical properties of Al–Cu–Cd alloys primarily depend on the heat treatment conditions, including quenching and aging treatment. The quenching factor analysis method has been widely used to describe the effect of continuous quenching on the properties of alloys, and the precipitate strengthening model focuses on the aging treatment process by calculating the evolution of physical parameters of precipitates affecting the properties of alloys. In this paper, a coupling model is proposed to predict the evolution of yield strength of Al–Cu–Cd alloys at different quenching rates and different aging times. To couple the two models, the equivalent isothermal quenching temperature is proposed, and the effects of Cd in the solid phase transformation of aluminum alloys is considered. The yield strength of Al–Cu–Cd alloys under different aging times and different quenching rates is determined experimentally. The predictions of the coupling model show good agreement with the experimental measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Effect of ageing on precipitation kinetics, tensile and work hardening behavior of Al-Cu-Mg (2024) alloy10.1016/j.msea.2017.05.090 ↗
2. Modeling the precipitation kinetics and tensile properties in Al-7Si-Mg cast aluminum alloys10.1016/j.msea.2016.12.042 ↗
3. Effect of Sc and Zr additions on the microstructure/strength of Al-Cu binary alloys10.1016/j.msea.2017.09.032 ↗
4. KINETICS OF PRECIPITATION IN ALUMINUM-ALLOYS DURING CONTINUOUS COOLING10.1007/BF02642924 ↗
5. Improvement of quench factor Analysis in phase and hardness prediction of a quenched steel10.1007/s11661-012-1574-x ↗
6. Modeling quench sensitivity of aluminum alloys for multiple tempers and properties: application to AA202410.1007/s11661-010-0359-3 ↗
7. THE KINETICS OF GRAIN BOUNDARY NUCLEATED REACTIONS10.1016/0001-6160(56)90041-4 ↗
8. Effect of precipitation during quenching on the prediction of the mechanical properties of Al-5 pct Cu alloy after T6 treatment10.1007/s11661-017-4291-7 ↗
9. The influence of precipitation on plastic deformation of Al-Cu-Li alloys10.1016/j.actamat.2013.03.015 ↗
10. Modeling the strengthening response to aging process of heat-treatable aluminum alloys containing plate/disc- or rod/needle-shaped precipitates10.1016/S0921-5093(02)00398-2 ↗
11. Modelling of the age hardening behaviour of Al-Mg-Si alloys10.1016/S1359-6454(00)00301-3 ↗
12. An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates10.1007/s11661-012-1211-8 ↗
13. A model for precipitation kinetics and strengthening in Al-Cu-Mg alloys10.1016/j.msea.2007.03.033 ↗
14. A precipitation hardening model for Al-Cu-Cd alloys10.1016/j.matdes.2018.04.057 ↗
15. PRECIPITATION HARDENING10.1016/0079-6425(63)90010-0 ↗
16. THEORY OF STRAIN INTERACTION OF SOLUTE ATOMS10.1103/PhysRev.74.639 ↗
17. EFFECTS OF DISLOCATIONS ON MOBILITIES IN SEMICONDUCTORS
18. THE INFLUENCE OF GRAIN BOUNDARIES ON THE NUCLEATION OF SECONDARY PHASES10.1016/0001-6160(55)90014-6 ↗
19. A yield strength model for the Al-Mg-Si-Cu alloy AA611110.1016/S1359-6454(03)00028-4 ↗
20. Strengthening effect of unshearable particles of finite size: a computer experimental study10.1016/S1359-6454(99)00179-2 ↗
21. Modeling of precipitation hardening in Mg-based alloys10.1007/s10853-006-1185-2 ↗
22. Friedel · 1956