journal article·2019-06

Secondary hardening behavior in Ti alloy

Pei Li, Tianlong Zhang, Xun Sun, Hualei Zhang, Dong Wang, Qiaoyan Sun, Lin Xiao, Jun Sun

Publisher page

Abstract

Abstract We report the existence of secondary hardening behavior in Ti–10V–2Fe–3Al (wt.%) (Ti-1023) for the first time. Through controlling the ageing temperature window between 550 °C and 575 °C, alloys are found to show the existence of two hardness peaks with aging time. This heat treatment with secondary hardening phenomenon exhibits unusual increase of hardness and strength. Further experimental observations show that the first hardness peak corresponds with the well precipitated α phase at very short time. Further increase of aging time does not influence the morphology of these intragranular α precipitates, but accompanying with a continuous composition change, which could be the origin of the secondary hardness peak. This structure change followed by composition diffusion is the typical characteristic of pseudospinodal mechanism. Phase field and ab-initio calculations based on pseudospinodal mechanism analyze the detailed microstructure/composition evolution and related solid solution strength, which confirm the role of composition on the appearance of secondary hardening behavior.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Lütjering · 2007
2. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
3. Predicting phase equilibrium, phase transformation, and microstructure evolution in titanium alloys10.1007/s11837-005-0112-3 ↗
4. Modeling the correlation between microstructure and the properties of the Ti–6Al–4V alloy based on an artificial neural network10.1016/j.msea.2011.08.059 ↗
5. Modelling the correlation between processing parameters and properties in titanium alloys using artificial neural network10.1016/S0927-0256(01)00160-4 ↗
6. Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β-titanium alloys10.1016/j.actamat.2015.11.020 ↗
7. The indirect influence of the ω phase on the degree of refinement of distributions of the α phase in metastable β-Titanium alloys10.1016/j.actamat.2015.09.053 ↗
8. The role of the ω phase on the non-classical precipitation of the α phase in metastable β-titanium alloys10.1016/j.scriptamat.2015.08.019 ↗
9. Studies on single and duplex aging of metastable beta titanium alloy Ti–15V–3Cr–3Al–3Sn10.1016/j.jallcom.2014.03.183 ↗
10. Phase transformations and tensile properties of Ti-10V-2Fe-3AI10.1007/BF02655118 ↗
11. Precipitation processes in the Beta-Titanium alloy Ti–5Al–5Mo–5V–3Cr10.1016/j.jallcom.2015.05.251 ↗
12. Cyclic deformation response and micromechanisms of Ti alloy Ti–5Al–5V–5Mo–3Cr–0.5–Fe10.1016/j.msea.2011.08.045 ↗
13. Age-hardening behaviour of two metastable beta-titanium alloys10.1016/j.msea.2010.07.055 ↗
14. Aging response of coarse-and fine-grained β titanium alloys10.1016/j.msea.2005.06.027 ↗
15. Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti–5Al–5V–5Mo–3Cr10.1016/j.matdes.2014.04.015 ↗
16. Titanium alloys and processing for high speed aircraft10.1016/S0921-5093(97)00818-6 ↗
17. Tempering of steel10.1007/BF02642436 ↗
18. Secondary hardening and fracture behavior in alloy steels containing Mo, W, and Cr10.1007/s11661-997-1005-6 ↗
19. Effects of alloying additions and austenitizing treatments on secondary hardening and fracture behavior for martensitic steels containing both Mo and W10.1007/s11661-001-0144-4 ↗
20. Effect of alloying additions on secondary hardening behavior of Mo-containing steels10.1007/s11661-997-0047-0 ↗
21. Effects of Ni additions and austenitizing temperature on secondary hardening behavior in high Co-Ni steels10.1007/s11661-001-0213-8 ↗
22. Ultrahigh-strength steels for aerospace applications10.1007/BF03220942 ↗
23. Effect of secondary hardening on cutting forces, cutting temperature, and tool wear in hard turning of high alloy tool steels10.1016/j.measurement.2014.12.033 ↗
24. Secondary hardening mechanism of alloy steels10.1179/030634584790419917 ↗
25. The morphology of secondary-hardening carbides in a martensitic steel at the peak hardness by 3DFIM10.1016/j.ultramic.2008.11.010 ↗
26. Attributes, characteristics and application of titanium and its alloys10.1007/s11837-010-0071-1 ↗
27. Preface to the viewpoint set on: the current state of magnesium alloy science and technology10.1016/j.scriptamat.2010.06.029 ↗
28. Recent development in aluminium alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
29. Double-peak age strengthening of cold-worked 2024 aluminum alloy10.1016/j.actamat.2012.11.039 ↗
30. Double-peak ageing behavior of Mg–2Dy–0.5 Zn alloy10.1016/j.jallcom.2011.05.117 ↗
31. Age-hardening behavior of cast Al–Si base alloy10.1016/j.matlet.2003.12.027 ↗
32. Age strengthening behavior and mechanical properties of Mg–Dy based alloys containing LPSO phases10.1016/j.msea.2014.09.103 ↗
33. Non-classical homogeneous precipitation mediated by compositional fluctuations in titanium alloys10.1016/j.actamat.2012.07.033 ↗
34. Pseudospinodal mechanism for fine α/β, microstructures in β -Ti alloys10.1016/j.actamat.2013.10.026 ↗
35. From chessboard tweed to chessboard nanowire structure during pseudospinodal decomposition10.1038/nmat2431 ↗
36. Predicting equilibrium shape of precipitates as function of coherency state10.1016/j.actamat.2012.04.019 ↗
37. Integrated Computational materials Engineering (ICME) Approach to design of Novel microstructures for Ti-alloys10.1007/s11837-014-1011-2 ↗
38. Phase field modeling of defects and deformation10.1016/j.actamat.2009.10.041 ↗
39. Phase-field models for microstructure evolution10.1146/annurev.matsci.32.112001.132041 ↗
40. PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation10.1016/j.calphad.2008.08.004 ↗
41. Calculation of enhancement factors for solute diffusion in the fcc dilute random alloy10.1080/14786430310001646754 ↗
42. Total-energy method based on the exact muffin-tin orbitals theory10.1103/PhysRevB.64.014107 ↗
43. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
44. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
45. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
46. Coherent-potential model of substitutional disordered alloys10.1103/PhysRev.156.809 ↗
47. Coherent-potential approximation for a nonoverlapping-muffin-tin-potential model of random substitutional alloys10.1103/PhysRevB.5.2382 ↗
48. Anisotropic lattice distortions in random alloys from first-principles theory10.1103/PhysRevLett.87.156401 ↗
49. Vitos · 2007
50. Phase transformation in Ti-Mo and Ti-V alloys
51. Effects of omega-phase precipitation on β→α, α'' transformations in a metastable beta titanium alloy10.1016/S0921-5093(00)01891-8 ↗
52. Phase transformation kinetics during continuous heating of a β-quenched Ti–10V–2Fe–3Al alloy10.1007/s10853-014-8701-6 ↗
53. On variant distribution and coarsening behavior of the α phase in a metastable β titanium alloy10.1016/j.actamat.2016.01.023 ↗
54. Experimental study and computer modelling of the β⇒ α+ β phase transformation in β21s alloy at isothermal conditions10.1016/S0925-8388(02)00804-6 ↗
55. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
56. A generalized law of mixtures10.1007/BF00356585 ↗
57. Modelling solid solution hardening in high entropy alloys10.1016/j.actamat.2014.11.014 ↗
58. Thermodynamic and kinetic modeling of bcc phase in the Ti–Al–V ternary system10.1016/j.msea.2010.09.013 ↗