journal article·2019-05Open access

CAFE based multi-scale modelling of ductile-to-brittle transition of steel with a temperature dependent effective surface energy

Yang Li, Anton Shterenlikht, Xiaobo Ren, Jianying He, Zhiliang Zhang

Abstract

It is still a challenge to numerically achieve the interactive competition between ductile damage and brittle fracture in ductile-to-brittle transition (DBT) region. In addition, since two types of fracture occur at two independent material length scales, it is difficult to process them with the same mesh size by using finite element method. In this study, a framework of modelling DBT of a thermal mechanical controlled-rolling (TMCR) steel is explored by using the cellular automata finite element (CAFE) method. The statistical feature of material’s microstructure is incorporated in the modelling. It is found that DBT curve cannot be reproduced with only one temperature dependent flow property, for which another temperature dependent variable must be considered. A temperature dependent effective surface energy based on typical cleavage fracture stage is proposed and obtained through a continuum approach in present work. The DBT of TMCR steel is simulated by using CAFE method implemented with a temperature dependent effective surface energy. It is found that numerical simulation is able to produce a full transition curve, especially with scattered absorbed energies in the transition region represented. It is also observed that simulation results can reproduce a comparable DBT curve contrasting to the experimental results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Continuum theory of ductile rupture by void nucleation and growth: Part I—yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
2. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
3. A complete Gurson model approach for ductile fracture10.1016/S0013-7944(00)00055-2 ↗
4. An extended model for void growth and coalescence10.1016/S0022-5096(00)00019-3 ↗
5. Ductile fracture models and their potential in local approach of fracture10.1016/0029-5493(87)90234-2 ↗
6. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
7. On the relationship between critical tensile stress and fracture toughness in mild steel10.1016/0022-5096(73)90008-2 ↗
8. A local criterion for cleavage fracture of a nuclear pressure vessel steel10.1007/BF02663302 ↗
9. A statistical model of brittle fracture by transgranular cleavage10.1016/0022-5096(86)90013-X ↗
10. Statistical model for carbide induced brittle fracture in steel10.1179/030634584790420384 ↗
11. Experimental and numerical investigation of ductile-to-brittle transition in a pressure vessel steel10.1016/j.msea.2008.06.046 ↗
12. Evaluation of fracture toughness and its scatter in the DBTT region of different types of pressure vessel steels10.1016/j.engfailanal.2010.08.018 ↗
13. An analysis of the temperature and rate dependence of Charpy V-notch energies for a high nitrogen steel10.1007/BF00045863 ↗
14. An analysis of the brittle-ductile transition in dynamic crack growth10.1007/BF00032217 ↗
15. Numerical modeling of the ductile-brittle transition10.1023/A:1007520917244 ↗
16. Determination of the fracture toughness of a low alloy steel by the instrumented Charpy impact test10.1023/A:1016323522441 ↗
17. Ductile to brittle transition of an A508 steel characterized by Charpy impact test: Part I: experimental results10.1016/j.engfracmech.2004.03.010 ↗
18. Ductile to brittle transition of an A508 steel characterized by Charpy impact test: Part II: modeling of the Charpy transition curve10.1016/j.engfracmech.2004.03.011 ↗
19. A modeling approach for the complete ductile–brittle transition region: cohesive zone in combination with a non-local Gurson-model10.1007/s10704-013-9914-4 ↗
20. The CAFE model of fracture—application to a TMCR steel10.1111/j.1460-2695.2006.01031.x ↗
21. Shterenlikht · 2003
22. Shterenlikht · 2004
23. Modeling the ductile-brittle transition behavior in thermomechanically controlled rolled steels10.1007/s11661-005-0292-z ↗
24. A general method for coupling microstructural response with structural performance
25. Three-dimensional cellular automata modelling of cleavage propagation across crystal boundaries in polycrystalline microstructures
26. 2018
27. Calibration of the Weibull stress scale parameter, σu, using the Master Curve10.1016/j.engfracmech.2004.03.009 ↗
28. Temperature dependence of Weibull stress parameters: studies using the Euro-material10.1016/j.engfracmech.2005.11.006 ↗
29. Inferring the temperature dependence of Beremin cleavage model parameters from the Master Curve10.1016/j.nucengdes.2010.11.009 ↗
30. Calibration of Beremin model with the master curve10.1016/j.engfracmech.2015.02.003 ↗
31. A probabilistic model for prediction of cleavage fracture in the ductile-to-brittle transition region and the effect of temperature on model parameters10.1016/j.msea.2005.09.098 ↗
32. Prediction of fracture toughness in ductile-to-brittle transition region using combined CDM and Beremin models10.1016/j.msea.2015.12.090 ↗
33. Constraint effect on the brittle-to-ductile transition of single-crystal iron induced by dislocation mobility10.1016/j.ijmecsci.2018.09.047 ↗
34. Micromechanical modeling of grain boundary resistance to cleavage crack propagation in ferritic steels10.1007/s10704-009-9415-7 ↗
35. Modelling of dislocation mobility controlled brittle-to-ductile transition10.1016/0921-5093(94)90970-9 ↗
36. Thermal activation of crack-tip plasticity: the brittle or ductile response of a stationary crack loaded to failure10.1103/PhysRevB.71.024108 ↗
37. Mechanics and physics of brittle to ductile transitions in fracture10.1115/1.1325408 ↗
38. 2018
39. An empirical correlation between temperature and activation energy for brittle-to-ductile transitions in single-phase materials10.1088/0031-8949/2007/T128/017 ↗
40. Brittle-ductile transition in low carbon steel deformed by the accumulative roll bonding process10.2320/matertrans.MD200817 ↗
41. The brittle-ductile transition in silicon10.1080/01418619108206126 ↗
42. Calculation of stresses and strains in four-point bending creep tests10.1111/j.1151-2916.1971.tb12263.x ↗
43. Fett · 2009
44. Effects of microstructure on cleavage fracture in pressure vessel steel10.1016/0001-6160(86)90222-1 ↗
45. Micromechanics of cleavage fracture initiation in ferritic steels by carbide cracking10.1016/j.jmps.2004.05.008 ↗
46. Stochastic modeling of the independent roles of particle size and grain size in transgranular cleavage fracture10.1007/BF02649480 ↗
47. Determination of energetic parameters controlling cleavage fracture in a Ti-V microalloyed ferrite-pearlite steel10.1016/S1359-6462(98)00467-9 ↗
48. Measurement of bainite packet size and its influence on cleavage fracture in a medium carbon bainitic steel10.1016/j.msea.2011.09.001 ↗
49. Cleavage initiation in steel: competition between large grains and large particles10.1016/j.msea.2012.11.019 ↗
50. Determination of the energetic parameters controlling cleavage fracture initiation in steels10.1111/j.1460-2695.1997.tb00296.x ↗
51. Effect of carbide distribution on the fracture toughness in the transition temperature region of an SA 508 steel10.1016/S1359-6454(02)00313-0 ↗
52. Effects of grain size on fracture toughness in transition temperature region of Mn–Mo–Ni low-alloy steels10.1016/S0921-5093(03)00344-7 ↗
53. Mobility of edge dislocations on {110} planes in tungsten single crystals10.1016/0001-6160(64)90144-0 ↗
54. Dislocation core structure and dynamics in two atomic models of α-zirconium10.1016/j.actamat.2010.01.028 ↗