journal article·2019-03

Effective grain refinement of pure Cu processed by new route of equal channel angular pressing

Hongfei Wang, Chunyan Ban, Nannan Zhao, Qingfeng Zhu, Jianzhong Cui

Publisher page

Abstract

Abstract Microstructures and mechanical properties of pure Cu processed by equal-channel angular pressing (ECAP) at room temperature (RT) were investigated. Samples were subjected to eight passes using routes BC, A and X. A new route which is called route X was proposed in this paper. Route X has a specific rotation angle of the sample between consecutive passes to maintain the angle between the shear plane (SP) and grain elongation plane (EP) equal to the angle between adjacent faces of {111} slip plane in each pass. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were utilized to investigate the deformed microstructure. The ultrafine grained (UFG) bulk pure Cu was fabricated by three different routes for eight passes. The TEM and XRD results revealed that dislocation density and grain size are both lower using route X after eight passes. The results of the tensile tests at RT showed that route X has better strength and elongation than routes A and BC processed samples, which is attributed to the lower dislocation density and smaller grain size with mostly high angle grain boundaries using route X. Furthermore, the fracture mechanism of ECAPed samples was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Structure and properties of ultra-fine grain Cu–Cr–Zr alloy produced by equal-channel angular pressing10.1016/S1359-6454(01)00437-2 ↗
2. Effect of equal channel angular pressing on tensile properties and fracture modes of casting Al–Cu alloys10.1016/j.msea.2006.04.044 ↗
3. Effect of processing routes on microstructure and mechanical properties of 2014 Al alloy processed by equal channel angular pressing10.1016/S1003-6326(09)60380-0 ↗
4. Finite element analysis of equal channel angular pressing of strain rate sensitive metals10.1016/S0924-0136(02)00796-3 ↗
5. Temperature and strain rate effects on the strength and ductility of nanostructured copper10.1063/1.1618370 ↗
6. The effect of ECAP and Cu addition on the aging response and grain substructure evolution in an Al–4.4wt% Mg alloy10.1016/j.msea.2009.08.037 ↗
7. The shearing characteristics associated with equal-channel angular pressing10.1016/S0921-5093(98)00750-3 ↗
8. Using equal-channel angular pressing for refining grain size10.1007/s11837-000-0128-7 ↗
9. EBSD analysis of nano-structured copper processed by ECAP10.1016/j.msea.2011.03.075 ↗
10. Microstructural evolution in copper subjected to severe plastic deformation: experiments and analysis10.1016/j.actamat.2006.07.008 ↗
11. Effect of the route and strain of equal-channel angular pressing on structure and properties of oxygen-free copper10.1016/j.msea.2006.04.156 ↗
12. Observations and issues on mechanisms of grain refinement during ECAP process10.1016/S0921-5093(00)00978-3 ↗
13. Influence of ECAP routes on the microstructure and properties of pure Ti10.1016/S0921-5093(00)01411-8 ↗
14. Equal channel angular pressing of magnesium at room temperature: the effect of processing route on microstructure and texture10.1080/09500839.2012.682740 ↗
15. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
16. A new method for the identification and quantification of magnetite–maghemite mixture using conventional X-ray diffraction technique10.1016/j.talanta.2012.03.001 ↗
17. Microstructure and mechanical properties of ultrafine-grained copper produced using intermittent ultrasonic-assisted equal-channel angular pressing10.1007/s11661-016-3622-4 ↗
18. Microstructure–properties relationship in a one-step quenched and partitioned steel10.1016/j.msea.2013.09.063 ↗
19. Stacking faults in face-centred cubic metals and alloys10.1080/14786435708242709 ↗
20. Deformation twinning in polycrystalline copper at room temperature and low strain rate10.1016/j.actamat.2005.10.002 ↗
21. Effect of strain path on structure and mechanical behavior of ultra-fine grain Cu–Cr alloy produced by equal-channel angular pressing10.1016/j.actamat.2005.01.046 ↗
22. Texture evolution in equal-channel angular extrusion10.1016/j.pmatsci.2009.01.001 ↗
23. Texture evolution during multi-pass equal channel angular extrusion of copper: neutron diffraction characterization and polycrystal modeling10.1016/j.actamat.2005.01.023 ↗
24. Annealing effects on the corrosion resistance of ultrafine-grained pure titanium10.1016/j.corsci.2014.08.017 ↗
25. Factors influencing tensile ductility of OFHC Cu having different ultrafine grained structures10.2320/matertrans.M2010089 ↗
26. Superplastic extensibility of nanocrystalline copper at room temperature10.1126/science.287.5457.1463 ↗
27. Structure and mechanical properties of ultrafine-grained metals10.1016/S0921-5093(97)00183-4 ↗
28. Mechanical properties and microstructure development of ultrafine-grained Cu processed by ECAP
29. Microstructure and strength of pure Cu with large grains processed by equal channel angular pressing10.1016/j.matdes.2013.05.029 ↗
30. Fracture micromechanisms of Cu nanomaterials prepared by ECAP
31. Investigation of texture and mechanical properties of copper processed by new route of equal channel angular pressing10.1016/j.matdes.2012.08.002 ↗