Effects of microstructure defects on the internal friction of C/SiC composites
Source abstract
Abstract
Abstract The internal friction of C/SiC composites was studied by forced vibration at the frequency and amplitude modes, and the effects of microstructural defects on the internal friction of C/SiC composites were investigated systematically and the internal friction mechanism was also discussed. Test results indicated that the microstructure defects in C/SiC samples improved the internal friction and had greater effects on the internal friction tested at low frequency and high amplitude. The slip friction of weak interphase was the main internal friction mechanism for C/SiC samples with interphase damage, and the internal friction increased slowly with the porosity. As the interphase was corroded completely, the pores in C/SiC composites became the main factor controlling the internal friction, and the internal friction increased rapidly with the porosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. SiC-matrix composites: nonbrittle ceramics for thermo-structural application10.1111/j.1744-7402.2005.02009.x ↗
2. Advanced ceramic matrix composite materials for current and future propulsion technology applications10.1016/j.actaastro.2004.05.052 ↗
3. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
4. Damping behavior of 6061Al/Gr metal matrix composites10.1007/BF02656638 ↗
5. Damping analysis of composite materials and structures10.1016/j.compstruct.2007.10.024 ↗
6. Internal friction of carbon-carbon composites at elevated temperatures10.1016/S0925-8388(03)00254-8 ↗
7. Effect of structure of pyrocarbon on the static and dynamic mechanical properties of carbon/carbon composites10.1016/j.msea.2014.07.038 ↗
8. Damping studies in fiber-reinforced composites-a review10.1016/S0263-8223(99)00041-0 ↗
9. Damping in composite materials: properties and models10.1016/j.compositesb.2015.03.081 ↗
10. The effect of layup and boundary conditions on the modal damping of FRP composite panels10.1177/0021998310382314 ↗
11. Micromechanical damping models for fiber-reinforced composites: a comparative study10.1016/S1359-835X(02)00019-2 ↗
12. Damping characteristics of CVI-densified carbon-carbon composites10.1016/S0008-6223(00)00014-2 ↗
13. Effects of microstructure on the internal friction of carbon-carbon composites10.1016/S0921-5093(00)00798-X ↗
14. Internal friction behavior of unidirectional carbon/carbon composites after different fatigue cycles10.1016/j.msea.2014.02.020 ↗
15. Internal friction and dynamic modulus of three-dimensional silicon carbide-matrix composites10.1016/j.matlet.2005.03.040 ↗
16. Effect of fiber directionality on the static and dynamic mechanical properties of 3D SiCf/SiC composites10.1016/j.msea.2016.02.006 ↗
17. Effect of interface type on the static and dynamic mechanical properties of 3D braided SiCf/SiC composites10.1016/j.msea.2016.05.080 ↗
18. Temperature dependence of internal friction and elastic modulus of SiC/SiC composites10.1016/S0925-8388(03)00252-4 ↗
19. Effect of SiC coating and heat treatment on damping behavior of C/SiC composites10.1016/j.msea.2007.06.049 ↗
20. Influence of heat treatment on the internal friction of 2D-C/SiC composites10.1016/j.jmatprotec.2008.08.014 ↗
21. Reactivity of a C/SiC composite in water vapour10.1016/S0955-2219(00)00207-7 ↗
22. Microstructural evolution of coating-modified 3D C/SiC composites after annealing in wet oxygen at different temperatures10.1016/j.corsci.2010.04.032 ↗
23. The effect of heat treatment on the strength and toughness of carbon fiber/silicon carbide composites with different pyrolytic carbon interphase thicknesses10.1016/j.carbon.2013.01.076 ↗
24. Effect of SiC coating and heat treatment on the thermal radiation properties of C/SiC composites10.1016/j.jeurceramsoc.2013.12.012 ↗
25. Oxidation behavior from room temperature to 1500 °C of 3D-C/SiC composites with different coatings10.1111/j.1151-2916.2002.tb00205.x ↗
26. Oxidation behaviors of C/SiC in the oxidizing environments containing water vapor10.1016/S0921-5093(02)00644-5 ↗
27. Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer10.1016/j.jallcom.2014.03.050 ↗
28. Internal friction behavior of C/SiC composites with environmental barrier coatings in corrosive environment10.1111/j.1744-7402.2010.02589.x ↗
29. Internal friction behavior of carbon–carbon composites10.1016/S0008-6223(00)00069-5 ↗
30. Internal friction behaviour of carbon fibre reinforced multilayered (PyC-SiC)n matrix composites10.1016/j.compositesb.2017.01.068 ↗
31. Effects of flexural fatigue cycles on the internal friction behavior of SiCnws-C/C composites10.1016/j.ceramint.2018.11.049 ↗
32. Vibration damping characteristics of carbon fiber-reinforced composites containing multi-walled carbon nanotubes10.1016/j.compscitech.2011.03.022 ↗
33. Enhancement of internal friction of carbon-carbon composites by selective oxidation10.1016/S0925-8388(03)00255-X ↗
34. Internal friction vs. thermal shock in C/C composites10.1016/j.compositesb.2016.06.078 ↗
35. Low-frequency internal friction of foamed Al10.1080/01418619808239989 ↗