journal article·2019-02

Grain size stability in a cryomilled nanocrystalline Al alloy powders containing diamantane nanoparticles

W. Hanna, K. Maung, M. Enayati, J.C. Earthman, F.A. Mohamed

Publisher page

Abstract

Abstract The thermal stability of nanocrystalline Al-5083 alloy powders stabilized by diamantane molecular diamonds was compared with that of the nanocrystalline Al-5083 alloy powders with no diamantane. Both materials were produced by mechanical milling in a liquid nitrogen medium. The results revealed that Al-5083 with diamantane exhibited greater thermal stability than the alloy without diamantane in the temperature range of 473 °K to 773 °K (0.56 to 0.91Tm) for various annealing times from 0.5 h to 48 h. In this regard, calculations showed that while the grain size was still in the nanoscale range ( 150 nm) in the absence of diamantane. The above finding can be qualitatively explained in terms of Zener's particle pinning concept. The stability of nanocrystalline Al-5083 powder by adding diamantane is discussed in terms of retaining the nanostructure and maintaining hardness and strength over long periods of time when the powder is used in surface coating via cold spray
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Nanostructured materials, basic concepts and microstructure10.1016/S1359-6454(99)00285-2 ↗
2. Suryanarayana · 2004 · 13 · 333
3. Synthesis and mechanical behavior of nanostructured materials via cryomilling10.1016/j.pmatsci.2005.04.004 ↗
4. Synthesis of nanostructured materials by mechanical milling: problems and opportunities10.1016/S0965-9773(97)00014-7 ↗
5. Benavides · 2000 · 155
6. Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion10.1063/1.1757035 ↗
7. Microstructure and properties of pure titanium processed by equal-channel angular pressing at room temperature10.1016/j.scriptamat.2008.05.001 ↗
8. Shewmon · 1969
9. High grain size stability of nanocrystalline Al prepared by mechanical attrition10.1557/JMR.2001.0474 ↗
10. Thermal stability of cryomilled nanocrystalline aluminum containing diamantane nanoparticles10.1007/s10853-011-5659-5 ↗
11. Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy10.1007/s11661-006-0044-8 ↗
12. High strain rate superplasticity in bulk cryomilled ultra-fine grained 5083Al10.1007/BF02586105 ↗
13. Liao · 2002 · 323
14. Grain growth behavior of a nanostructured 5083 Al-Mg alloy10.1557/JMR.2001.0133 ↗
15. Isolation and structure of higher diamondoids, nanometer-sized diamond molecules10.1126/science.1078239 ↗
16. High-strength nanocrystalline Ni-W alloys produced by electrodeposition
17. Klug · 1974
18. Mechanically driven alloying and grain size changes in nanocrystalline Fe-Cu powders10.1557/JMR.1992.1751 ↗
19. Grain growth behavior of cryomilled INCONEL 625 powder during isothermal heat treatment10.1007/s11661-002-0011-y ↗
20. The microstructure of mechanically alloyed Al-Mg determined by X-ray diffraction peak profile analysis10.1016/j.msea.2003.12.016 ↗
21. Nanostructure formation by mechanical attrition10.1016/0965-9773(95)00027-5 ↗
22. A dislocation model for the minimum grain size obtainable by milling10.1016/S1359-6454(03)00230-1 ↗
23. Estimating grain size distributions in nanocrystalline materials from X-ray diffraction profile analysis10.1080/01418619808224072 ↗
24. as quoted by Smith CS
25. Manohar · ISI Int. · 1998 · 38 · 91310.2355/isijinternational.38.913 ↗
26. Progress report on recent advances in physical metallurgy: (C) The quantitative relationship between microstructure and properties in two-phase alloys10.1179/imr.1973.18.1.31 ↗
27. On the theory of the effect of precipitate particles on grain growth in metals
28. The interaction of crystal boundaries with second phase particles
29. Fullman · 1952 · 179
30. The interaction between spherical particles and triple lines, and quadruple points10.1016/0956-7151(92)90403-2 ↗
31. Nes, On grain boundary drag on second phase particle10.1016/0036-9748(83)90216-8 ↗
32. Five decades on the Zener Equation10.2355/isijinternational.38.913 ↗
33. Super thermostability of nanoscale TIC-reinforced copper alloys manufactured by a two-step ball-milling process10.1080/14786435.2015.1112442 ↗
34. HREM study of dispersoids in cryomilled oxide dispersion-strengthened materials10.1080/01418619308221210 ↗
35. Enayati · Kona Powder Part. J. · 2017 · 34 · 20710.14356/kona.2017006 ↗
36. Effect of recrystallized grain size on grain growth10.1063/1.1698164 ↗
37. Grain growth in high-purity aluminum and in an aluminum magnesium alloy
38. Some factors affecting the rate of grain growth in metals
39. The deformation and ageing of mild steel10.1088/0370-1301/64/9/303 ↗
40. The cleavage strength of polycrystals
41. Cold spray deposition of nanocrystalline aluminum alloys10.1007/s11661-005-0182-4 ↗
42. Secondary recrystallization effects in nanostructured elemental metals10.1016/0956-716X(92)90401-Y ↗