Rate sensitivity and work-hardening behavior of an advanced Ti-Al-N alloy under uniaxial tensile loading
Source abstract
Abstract
Abstract In the present work, titanium alloys doped with different amounts of impurity solutes were studied as regards their strain rate sensitivity, work-hardening and fracture manner. The experimental results revealed a transition of both the strain hardening behavior and fracture manner with increasing the impurity content. Namely, the low impurity content Ti exhibited features of intergranular crack, whereas the high impurity content Ti showed transgranular cracking instead. In addition, the physical activation volumes were found to reduce with the impurity content, which is attributed to both dislocation pinning and solute drag effects. A constitutive model was proposed to understand the mechanical behavior of the materials. The highlights of the model are of separating deforming grains into plastic and elastic groups and of giving them different properties. To describe the volume of grains changing from elastic to plastic deformation with strain, a controlling function was applied based on an empirical analysis. It turns out that the proposed model predicted stress-strain curves in well agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods10.1016/j.msea.2012.11.058 ↗
2. Titanium powders via gas-solid direct reaction process and mechanical properties of their extruded materials10.2320/matertrans.L-M2015816 ↗
3. Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration10.1557/jmr.2017.338 ↗
4. Advanced mechanical properties of a powder metallurgy Ti-Al-N alloy doped with ultrahigh nitrogen concentration10.1007/s11837-018-2780-9 ↗
5. Microstructure and mechanical properties of CP-Ti fabricated via powder metallurgy with non-uniformly dispersed impurity solutes10.1016/j.msea.2018.01.031 ↗
6. Effect of interstitial solutes on the strength and ductility of titanium10.1016/0079-6425(81)90001-3 ↗
7. Origin of dramatic oxygen solute strengthening effect in titanium10.1126/science.1260485 ↗
8. A comparative study on the microstructure and mechanical behavior of titanium: ultrafine grain vs. coarse grain10.1016/j.msea.2016.05.093 ↗
9. Compressive responses of ultrafine-grained titanium within a broad range of strain rates and temperatures10.1016/j.mechmat.2017.07.015 ↗
10. Mechanical and microstructural response of Ti-24Al-11Nb as a function of temperature and strain rate10.1016/S1359-6454(96)00089-4 ↗
11. A review on the strain rate dependency of the dynamic viscoplastic response of FCC metals10.1016/j.pmatsci.2017.04.004 ↗
12. Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy10.1016/j.actamat.2011.12.002 ↗
13. Rate-dependent hardening model for pure titanium considering the effect of deformation twinning10.1016/j.ijmecsci.2015.04.008 ↗
14. Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium10.1016/S1359-6462(02)00005-2 ↗
15. Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium10.1016/j.actamat.2016.07.044 ↗
16. Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy10.1016/j.actamat.2015.11.026 ↗
17. Dynamic mechanical properties and microstructure of Ti-6Al-7Nb biomedical alloy as function of strain rate10.1179/1743284713Y.0000000252 ↗
18. The variation of strain rate sensitivity exponent and strain hardening exponent in isothermal compression of Ti–6Al–4V alloy10.1016/j.matdes.2009.09.055 ↗
19. Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr β-Ti alloys10.1016/j.scriptamat.2018.02.028 ↗
20. Strain rate effects in the ultrafine grain and nanocrystalline regimes — its influence on some constitutive responses10.1007/s10853-006-0700-9 ↗
21. Mechanical behavior of microstructure engineered multi-length-scale titanium over a wide range of strain rates10.1016/j.actamat.2013.03.011 ↗
22. Predicting plastic flow and irradiation hardening of iron single crystal with mechanism-based continuum dislocation dynamics10.1016/j.ijplas.2013.01.015 ↗
23. Young's modulus and damping of Ti-6Al-4V alloy as a function of heat treatment and oxygen concentration10.1016/0921-5093(90)90097-M ↗
24. Influence of interstitial elements on the bulk modulus and theoretical strength of a-titanium: a first-principles study
25. Lütjering · 2007
26. Orientation dependence of the strain-rate sensitivity and thermally activated flow in iron single crystals10.1016/0001-6160(70)90058-1 ↗
27. Effect of strain rate on the mechanical properties of magnesium alloy AMX60210.1016/j.msea.2015.10.022 ↗
28. Indentation-based rate-dependent plastic deformation of polycrystalline pure magnesium10.1016/j.msea.2018.01.036 ↗
29. Temperature dependence of yield stress, deformation mode and deformation structure in single crystals of TiAl (Ti−56 at% Al)10.1080/01418619708205149 ↗
30. Activation volume and strain rate sensitivity in plastic deformation of nanocrystalline Ti10.1016/j.surfcoat.2012.05.130 ↗
31. Effect of grain size on compressive behaviour of titanium at different strain rates10.1016/j.msea.2015.08.031 ↗
32. Dislocation-motion as an underdamped oscillator and electron-dislocation interactions in dilute lead solid-solutions10.1016/0001-6160(76)90028-6 ↗
33. The role of Peierls relief in the low-temperature plasticity of pure alpha-Ti10.1063/1.2126949 ↗