The influence of impurities on the ductility and toughness of a low-temperature-aged U-Nb alloy
Source abstract
Abstract
Abstract The effect of impurity level and inclusions on the mechanical properties, especially the ductility and toughness, of two low-temperature-aged U-5.5Nb alloys were extensively investigated. Two U-5.5Nb alloys with different impurity levels, i.e., total C+N contents of 330 and 840 mass ppm, are discussed here. The methods used in the present study were scanning electron microscopy with energy-dispersive X-ray spectroscopy, optical microscopy, time-of-flight secondary ion mass spectrometry, tensile and impact mechanical property tests, and nanoindentation measurement. According to the results, both the low- and high-impurity-level samples contain two types of inclusions, namely, U(N,C) and Nb2C inclusions. The inclusion volume fraction, average inclusion radius, inclusion spacing, and number of inclusion particles per unit area all increase with increasing impurity level. In addition, the ductility, i.e., elongation, reduction in area, and impact toughness decrease with increasing impurity level. However, the impurity level has little effect on the yield strength. The inclusions have a detrimental effect on the ductility and toughness of the alloys because the inclusions are the preferential sites for void nucleation. Based on the experimental observations, an illustration of the failure mechanisms for the tensile and impact fracture behaviors for the low-temperature-aged U-5.5Nb alloy is presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. The effects of microstructure on the hydriding for 500 °C/2 h aged U-13 at%Nb alloy10.1016/j.jnucmat.2017.03.014 ↗
2. The microstructure and hydriding characteristics of high temperature aged U-13 at% Nb alloy10.1016/j.jnucmat.2015.03.051 ↗
3. Effects of natural aging on the tensile properties of water-quenched U-6%Nb alloy10.1016/j.jnucmat.2004.01.014 ↗
4. Effect of niobium element on the electrochemical corrosion behavior of depleted uranium10.1016/j.jnucmat.2016.05.035 ↗
5. X-ray diffraction analyses of aged U-Nb alloys10.1016/j.jallcom.2006.11.089 ↗
6. Thermodynamic modeling of the U-Mn and U-Nb systems10.1016/j.jnucmat.2008.07.008 ↗
7. The effect of quench rate on the microstructure, mechanical properties, and corrosion behavior of U-6 wt pct Nb10.1007/BF02648560 ↗
8. Phases metastables dans les alliages uranium-niobium10.1016/0022-3115(64)90122-9 ↗
9. Low temperature age hardening in U-13 at% Nb: an assessment of chemical redistribution mechanisms10.1016/j.jnucmat.2009.06.025 ↗
10. Martensitic structures and deformation twinning in the U-Nb shape-memory alloys10.1080/01418610010010971 ↗
11. Neutron diffraction study of the deformation mechanisms of the uranium-7 wt% niobium shape memory alloy10.1016/j.msea.2005.10.001 ↗
12. Texture development and deformation mechanisms during uniaxial straining of U-Nb shape-memory alloys10.1080/14786430500036314 ↗
13. Mechanisms of void formation during uniaxial tensile testing in a low-temperature-aged U-Nb alloy10.1016/j.msea.2018.03.031 ↗
14. Determination of the mechanical properties of inclusions and matrices in α-U and aged U-5.5Nb alloy by nanoindentation measurements10.1088/2053-1591/aa9864 ↗
15. R.E. Hackenberg, U-Nb aging final report, Los Alamos NationalLaboratory, Report, LA-14327, 2007.10.2172/1820470 ↗
16. Metallurgical characterization of melt-spun ribbons of U-5.4 wt%Nb alloy10.1016/j.jnucmat.2018.02.002 ↗
17. R.E. Hackenberg, Property and Lifetime Prediction in Aged U-Nb Alloys - A Statistical Assessment, Los Alamos National Laboratory, Report, LA-14389, 2009.10.2172/957046 ↗
18. R.J. Jackson, Isothermal Transformations of Uranium-13 Atomic Percent Niobium, Dow Chemical Company, Rocky Flats Division, 1971, Report, RFP-1609.10.2172/4079457 ↗
19. R.E. Hackenberg, The Surprising Occurrence of Non-steady-state Growth of Divergent Lamellar Decomposition Products in Uranium-niobium Alloys: A Preliminary, Los Alamos National Laboratory, 2012, Report, LA-UR-12-25218.10.2172/1052805 ↗
20. The effect of low-temperature aging on the microstructure and deformation of uranium- 6 wt% niobium: an in-situ neutron diffraction study10.1016/j.jnucmat.2016.09.004 ↗
21. X-ray diffraction analyses of aged U-Nb alloys10.1016/j.jallcom.2006.11.089 ↗
22. L. Hsiung, J. Zhou, Sinodal Decomposition and Order Disorder Transformation in a Water Quenched U-6 wt%Nb alloy, Lawrence Livermore National Laboratory, 2006, Report, UCRL-TR-224432.10.2172/900131 ↗
23. The influence of impurities on the crystal structure and mechanical properties of additive manufactured U-14 at%Nb10.1016/j.scriptamat.2016.11.010 ↗
24. Effect of impurity level and inclusions on the ductility and toughness of an ultra-high-strength steel10.1016/j.msea.2017.05.013 ↗
25. A discussion of the effect of inclusion volume fraction on the toughness of steel10.1016/j.msea.2007.02.015 ↗
26. The influence of the carbon addition on the microstructure of a U-Nb alloy and the features of Nb2C inclusions10.1051/metal/2017098 ↗
27. Metallographic preparation techniques for U-6 wt%Nb10.1016/j.jnucmat.2012.05.013 ↗
28. J.G. Avery, The Effect of Innoculation of Uranium and Uranium-6 Weight Percent Niobium with 0.01 to 1.0 Weight Percent Titanium on Impurity Levels, Dow Chemical Company, Rocky Flats Division, 1974, Report, RFP-2067.10.2172/4289333 ↗
29. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
30. A discussion of the spacing of inclusions in the volume and of the spacing of inclusion nucleated voids on fracture surfaces of steels10.1016/j.msea.2008.11.065 ↗
31. ASTM E23, E23-09: Standard Test Method for Notched Bar Impact Testing of Metallic Materials, Annual Book ASTM Stand. ASTM, West Conshohocken, PA, 2009.
32. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
33. Micro-mechanical characterization of uranium10.1016/j.jnucmat.2008.09.035 ↗
34. A constitutive model for a uranium-niobium alloy10.1063/1.2208907 ↗
35. Large strain deformation in uranium 6 Wt Pct niobium10.1007/s11661-011-0931-5 ↗
36. R.E. Hackenberg, Synthesis and Characterization of Nonbanded U-Nb Plate, Los Alamos National Laboratory, 20007, Report, LA-14316.
37. Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements10.1016/j.actamat.2004.08.002 ↗
38. Effects of processing on microstructure and properties of α-uranium formed parts10.1016/S1359-6462(02)00137-9 ↗
39. Effect of volume fraction and shape of sulfide inclusions on through-thickness ductility and impact energy of high-strength 4340 plate steels10.1007/BF02648395 ↗
40. Thermodynamic modelling of the C-U and B-U binary systems10.1016/S0022-3115(00)00713-3 ↗
41. Effect of strain rate on fracture of U-5.5Nb alloy10.1080/02670836.2017.1319117 ↗
42. Elastic, plastic, and strength properties of U-Nb and U-Nb-Zr alloys
43. Grain refinement and mechanical response of U-5.5 wt%Nb alloy produced by cold rolling and heat treatment10.1016/j.jnucmat.2017.07.012 ↗
44. Fracture of uranium alloys
45. Using ab initio calculations in designing bcc Mg-Li alloys for ultra-lightweight applications10.1016/j.actamat.2008.08.037 ↗
46. Elastic properties of face-centred cubic Fe-Mn-C studied by nanoindentation and ab initio calculations10.1016/j.actamat.2012.07.038 ↗
47. Influence of carbon on the tensile properties of U-0.1 wt%Cr10.1023/A:1015461022009 ↗
48. General yielding of Charpy V-notch and precracked Charpy specimens
49. Simple formula for dynamic stress intensity factor of pre-cracked Charpy specimen10.1016/0013-7944(80)90081-8 ↗
50. Fracture parameters determination at yield point and fracture initiation in instrumented impact testing10.1016/0013-7944(86)90267-5 ↗
51. Removal of iron from aluminum: a review10.1080/08827508.2010.542211 ↗
52. The effect of inhomogeneous plastic deformation on the ductility and fracture behavior of age hardenable aluminum alloys10.1016/j.ijplas.2004.03.003 ↗
53. Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet10.1016/j.msea.2012.08.117 ↗
54. Plastic deformation inhomogeneity in a single crystal nickel-base superalloy10.1016/S0921-5093(01)01666-5 ↗
55. A criterion for inhomogeneous plastic deformation10.1080/14786437008225836 ↗
56. Effects of heat treatment on microstructure and dynamic shear localization of U-Nb alloy
57. The fracture morphology and microstructure of U-Nb alloy at high strain rate
58. Fractographic correlations with mechanical properities in ferritic martensitic steels10.1088/2051-672X/aa7931 ↗
59. Effects of inclusions, grain boundaries and grain orientations on the fatigue crack initiation and propagation behavior of 2524-T3 Al alloy10.1016/j.msea.2013.05.053 ↗