journal article·2018-05Open access

Microstructural development of powder metallurgy cobalt-based superalloys processed by field assisted sintering techniques (FAST)

R. Casas, F. Gálvez, M. Campos

Abstract

This study reports the microstructural evolution, physical and mechanical properties of cobalt-based superalloys processed from mechanical alloyed powders and consolidated by field-assisted sintering techniques (FAST). After an initial thermodynamic simulation of the ternary diagram by Thermocalc (R) to determine the composition, a sequential milling process was carried out at room temperature up to 40 h milling of two different alloying systems: CO-12Al-10W (at%) and Co-12Al-10W-2Ti-2Ta (at%). Characterization of the powders was performed by using X-Ray diffraction, scanning electron microscope with energy-dispersive X-ray spectroscopy (EDS) and particle-size analyzer. Consolidated samples were also characterized in terms of density, microhardness and hardness. In order to promote the dual gamma/gamma microstructure, both alloys were aged after solution annealing heat treatment, improving a new route of consolidation with a new level of performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Reed · 2006
2. The hotter the engine, the better10.1126/science.1179327 ↗
3. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
4. W.C.H.A.M. Beltran, in: C.T. Sims, N.S. Stoloff, Superalloys II, 1987 pp. 135–163.
5. Du Mond · 1980 · 3 · 589
6. New Co-based γ-γ′ high-temperature alloys
7. High temperature creep of new Ll2 -containing cobalt-base superalloys10.7449/2012/Superalloys_2012_823_832 ↗
8. Single-crystal solidification of new Co–Al–W-base alloys10.1016/j.intermet.2010.12.018 ↗
9. A new polycrystalline Co-Ni superalloy10.1007/s11837-014-1175-9 ↗
10. Blaise · Cobalt · 1970 · 49 · 192
11. Viatour · Cobalt · 1973 · 3 · 67
12. Drapier · Cobalt · 1965 · 27 · 59
13. Drapier · Cobalt · 1968 · 39 · 63
14. The thermal stability of intermetallic compounds in an As-cast SX Co-base superalloy10.1002/adem.201400249 ↗
15. First-principles investigation of phase stability, elastic and thermodynamic properties in L12 Co3(Al,Mo,Nb) phase10.1016/j.intermet.2016.08.002 ↗
16. Gamma-gamma prime-gamma double prime dual-superlattice superalloys10.1016/j.scriptamat.2017.04.029 ↗
17. Intermetallic compounds in co-based alloys-phase stability and application to superalloys
18. Improved high temperature γ’ stability of Co-Al-W-base alloys containing Ti and Ta10.1016/j.matlet.2013.09.023 ↗
19. The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys10.1016/j.jallcom.2015.01.031 ↗
20. The effects of alloying elements (Ta, Hf) on the thermodynamic stability of gamma prime-Co3(Al,W) phase10.1016/j.intermet.2012.06.006 ↗
21. A. Mottura, A. Janotti, T.M. Pollock, Alloying effects in the gamma prime phase of Co-base superalloys, in: Proceeedings of Superalloys 2012: 12th International Symposium on Superalloys, 2012, p. 685.10.7449/2012/Superalloys_2012_685_693 ↗
22. Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation10.1016/j.actamat.2014.06.020 ↗
23. Effects of quaternary alloying elements on the γ′ solvus temperature of Co-Al-W based alloys with fcc/L12 two-phase microstructures10.1016/j.jallcom.2010.08.050 ↗
24. Influence of ruthenium on microstructural evolution in a model Co-Al-W superalloy10.1016/j.actamat.2016.07.014 ↗
25. Thermodynamic, structural and elastic properties of Co3X (X=Ti, Ta, W, V, Al) compounds from first-principles calculations10.1016/j.intermet.2012.08.022 ↗
26. Microstructure and mechanical properties of γ’ strengthened Co-Ni-Al-W-base ODS alloys10.1016/j.matchemphys.2012.06.055 ↗
27. Thermodynamic assessment of Co-Al-W system and solidification of Co-enriched ternary alloys10.1007/s10853-010-5115-y ↗
28. Thermodynamic description of the γ’ phase in the Co-Al-W based superalloys10.4028/www.scientific.net/MSF.747-748.654 ↗
29. Experimental investigation and thermodynamic modeling of the Co-rich region in the Co-Al-Ni-W quaternary system10.1007/s11669-014-0327-5 ↗
30. Thermodynamic re-assessment of the Al-Co-W system10.1016/j.calphad.2017.09.007 ↗
31. Flow stress anomalies in γ-γ’ two-phase Co-Al-W-base alloys10.1016/j.scriptamat.2006.10.039 ↗
32. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
33. W.C. Oliver, G.M. Pharr, and I. Introduction, experiments, 1992.
34. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
35. On the minimum grain size produced by milling Zn-22%Al10.1016/S0921-5093(03)00294-6 ↗
36. Structural and thermodynamic properties of nanocrystalline fcc metals prepared by mechanical attrition10.1557/JMR.1992.1751 ↗
37. Mechanically milled AA6061/(Ti3Al)P MMC reinforced with intermetallics – the structure and properties10.1016/j.jmatprotec.2004.04.202 ↗
38. Alloying and the micromechanics of Co-Al-W-X quaternary alloys10.1016/j.msea.2014.05.044 ↗
39. Mechanical properties and lattice misfit of γ-γ’ strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system10.1016/j.intermet.2014.07.006 ↗
40. T. Report, Superalloys Report, no. January, 2016.
41. Creep and directional coarsening in single crystals of new γ-γ’ Cobalt-base alloys10.1016/j.scriptamat.2012.01.008 ↗
42. Creep properties of different γ’-strengthened Co-base superalloys10.1016/j.msea.2012.04.083 ↗
43. Effect of Ta additions on microstructure and mechanical properties of a single-crystal Co-Al-W-base alloy10.1016/j.matlet.2015.01.133 ↗