journal article·2018-01

Structural phenomena induced in the course of and post low-temperature KOBO extrusion of AA6013 aluminum alloy

Andrzej Korbel, Krzysztof Pieła, Paweł Ostachowski, Marek Łagoda, Ludwik Błaż, Włodzimierz Bochniak, Mirosława Pawlyta

Publisher page

Abstract

Abstract AA6013 aluminum alloy in two states: supersaturated and precipitation hardened (T6 temper), was subjected to low-temperature KOBO extrusion with a high extrusion ratio (λ = 100) with alternating twisting frequency of 2.5 and 8 Hz. Higher twisting frequency resulted in lower extrusion force, which was linked to the high number of generated point defects. The same phenomenon is thought to be responsible for the lack of precipitation hardening in the wires extruded by the KOBO method from the T6 temper resulting either from tensile relaxation, derived from the deformations of crystal lattice around precipitations (interactions with point defects), or the change in solubility of the alloy's components in the overequlibrial concentration of point defects. The structural image of the phenomenon induced in the course of and post low-temperature KOBO extrusion of 6013 aluminum alloy, reveals the trans-grain rows of 'strips' (shear bands) saturated with point defects, with strong local disturbance of the crystal lattice. The images were interpreted as a stage of the 'strips' transformation (disintegration) into clusters of point defects, particularly interstitial atoms. With the use of TEM, HRTEM and HRSTEM techniques, the clusters were identified as nano-metric structural elements containing additional atomic planes. It was concluded, that if the number of generated point defects is higher than the number of defects taking part in the relaxation processes (decrease in, lack of precipitation hardening), during the ageing process, hardening clusters of point defects are formed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Alloy designation, processing and use of AA6XXX series aluminium alloys
2. Effect of the aging process on mechanical properties and machinability in AA6013 aluminum alloys10.5897/SRE2014.5929 ↗
3. 〈www.millproducts-alcoa.com〉 – (accessed 25 March 2017).
4. Microstructure and texture evolution during ECAP of an AlMgSi alloy: observations, mechanisms and modeling10.1016/j.msea.2005.08.049 ↗
5. Modeling of precipitation hardening in pre-aged AlMgSi(Cu) alloys10.1016/j.actamat.2005.08.006 ↗
6. Effect of Q-Al5Cu2Mg8Si6 phase on mechanical properties of Al-Si-Cu-Mg alloy at elevated temperature10.1016/j.msea.2017.03.087 ↗
7. Enhanced mechanical properties of an Al–Si–Cu–Mg alloy at 300 °C: effects of Mg and the Q-precipitate phase. Al5Cu2Mg8Si6 phase on mechanical properties of Al-Si-Cu-Mg alloy at elevated temperature10.1016/j.msea.2014.10.080 ↗
8. Dieter · 1986
9. Callister · 2001
10. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
11. The evolution of homogeneity and grain refinement during equal-channel angular pressing: a model for grain refinement in ECAP10.1016/j.msea.2005.03.083 ↗
12. Dynamic precipitation during severe plastic deformation of an Al-Mg-Si aluminium alloy10.1016/j.msea.2006.09.142 ↗
13. The influence of temperature and storage time at RT on nucleation of the β″ phase in a 6082 Al–Mg–Si alloy10.1016/S1359-6454(02)00470-6 ↗
14. The effect of predeformation on the β″ and β′ precipitates and the role of Q′ phase in an Al–Mg–Si alloy; AA602210.1016/j.scriptamat.2005.04.013 ↗
15. Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing10.1016/j.msea.2006.09.144 ↗
16. Aging behavior and mechanical properties of 6013 aluminum alloy processed by severe plastic deformation10.1016/S1003-6326(14)63543-3 ↗
17. A combination of high electrical conductivity and mechanical strength in AA1070 commercially pure aluminum wires fabricated by KoBo extrusion10.3139/146.111355 ↗
18. Extrusion of metals and alloys by KOBO method
19. Study on the solid solubility extension of Mo in Cu by mechanical alloying Cu with amorphous Cr(Mo)10.1016/j.actamat.2008.08.013 ↗
20. Softening of nanostructured Al-Zn and Al-Mg alloys after severe plastic deformation10.1016/j.actamat.2006.04.025 ↗
21. Stratified plastic flow in metals10.1016/j.ijmecsci.2017.04.006 ↗
22. Visco-plastic flow of metal in dynamic conditions of complex strain scheme10.1007/s11661-011-0688-x ↗
23. Mechanical properties of aluminum extruded via the KOBO method with direct and lateral outflow10.3139/146.110953 ↗
24. One dimensional motion of interstitial clusters in Ni-Au alloy10.1016/j.jnucmat.2007.03.124 ↗
25. Damsk · 1963
26. Cottrell · 1964
27. Lüders deformation and superplastic flow of metals extruded by KOBO method10.1080/14786435.2013.765977 ↗
28. A new constitutive approach to large strain plastic deformation10.3139/146.111311 ↗
29. Anomalies in precipitation hardening process of 7075 aluminum alloy extruded by KOBO method10.1016/j.jmatprotec.2014.09.008 ↗
30. A. Korbel, W. Bochniak, Method of plastic forming of materials, U.S. Patent No 5,737,959 (1998), European Patent No 0711210 (2000).
31. Refinement and control of the metal structure elements by plastic deformation10.1016/j.scriptamat.2004.06.020 ↗
32. The aging characteristics of aluminum alloys. Electron transmission studies of Al-Mg-Si alloys
33. Vacancy effects on one-dimensional migration of interstitial clusters in iron under electron irradiation at low temperatures10.1080/14786435.2016.1194533 ↗
34. Superplastic flow of metals extruded by KOBO method
35. Direct observations of defects in quenched gold10.1080/14786435908238228 ↗
36. Fission-fusion correlation by fission reactor irradiation with improved control10.1016/0022-3115(90)90245-I ↗
37. Similarity and difference between fcc, bcc and hcp metals from the view point of point defect cluster formation10.1016/S0022-3115(99)00167-1 ↗