Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure
Source abstract
Abstract
Abstract Nanotwinned metals with a gradient microstructure have attracted a great deal of attention due to their excellent mechanical performance of combining high strength and high ductility. In this work, a micromechanical model is developed to describe the stress-strain response of gradient-nanotwinned metals with a composite microstructure. The deformation mechanisms originated from bimodal grain size distribution in nanostructured materials and nanoscale twin lamellae in a grain are involved in derivation of flow stress. The contributions from the gradient distribution of microstructural size and the microcracks during plastic deformation are taken into account in simulating the mechanical properties such as the yield strength and ductility. Using the proposed model, we figure out the stress-strain relation of gradient nanostructured metals and analyze the quantitative relation between the mechanical properties and the geometrical/physical parameters related to the gradient-nanotwinned composite copper. Numerical results show that, the strength and ductility of the gradient-nanotwinned bimodal metals are both improved as twins spacing decreases. With the volume fraction of coarse-grained phase decreased, the strength is improved significantly accompanied by slight reduction of the ductility. In addition, the simulated results are in a good agreement with experimental results. The present work could be helpful to describe and predict the elastic-plastic deformation behavior of gradient nanostructured composite -metals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
2. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals10.1016/j.actamat.2007.01.038 ↗
3. Ultra-strength materials10.1016/j.pmatsci.2010.04.001 ↗
4. Mechanical behavior of emerging materials10.1016/S1369-7021(12)70218-3 ↗
5. Nanostructured metals: retaining ductility10.1038/nmat1141 ↗
6. The conflicts between strength and toughness10.1038/nmat3115 ↗
7. and high-ductility nanostructured and amorphous metallic materials10.1002/adma.201401595 ↗
8. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
9. Strength, strain-rate sensitivity and ductility of copper with nanoscale twins10.1016/j.actamat.2006.06.062 ↗
10. Metallic materials with nano-scale twins10.3724/SP.J.1037.2010.01422 ↗
11. Revealing the maximum strength in nano-twinned copper10.1126/science.1167641 ↗
12. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
13. Dislocation nucleation governed softening and maximum strength in nano-twinned metals10.1038/nature08929 ↗
14. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
15. A unified mechanistic model for size-dependent deformation in nanocrystalline and nanotwinned metals10.1016/j.actamat.2011.07.019 ↗
16. Defective twin boundaries in nanotwinned metals10.1038/nmat3646 ↗
17. Dislocation–twin interactions in nanocrystalline fcc metals10.1016/j.actamat.2010.10.028 ↗
18. Scaling of maximum strength with grain size in nanotwinned fcc metals10.1103/PhysRevB.83.132104 ↗
19. Analysis of size-dependent slip transfer and inter-twin flow stress in a nanotwinned fcc metal10.1016/j.actamat.2013.12.028 ↗
20. Prediction of mechanical properties in bimodal nanotwinned metals with a composite structure10.1016/j.compscitech.2015.12.013 ↗
21. Fracture, fatigue, and creep of nanotwinned metals10.1557/mrs.2016.65 ↗
22. Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals10.1073/pnas.0611097104 ↗
23. Deformation characteristics and stress–strain response of nanotwinned copper via molecular dynamics simulation10.1016/j.actamat.2009.05.028 ↗
24. Plastic anisotropy and associated deformation mechanisms in nanotwinned metals10.1016/j.actamat.2012.09.052 ↗
25. Brittle versus ductile behaviour of nanotwinned copper: a molecular dynamics study10.1016/j.actamat.2015.01.054 ↗
26. Modeling grain size dependent optimal twin spacing for achieving ultimate high strength and related high ductility in nanotwinned metals10.1016/j.actamat.2011.05.027 ↗
27. Surface stress effects on the yield strength in nanotwinned fcc metallic nanowires10.1115/1.4028039 ↗
28. Analysis of the twin spacing and grain size effects on mechanical properties in hierarchically nanotwinned face-centered cubic metals based on a mechanism-based plasticity model10.1016/j.jmps.2014.12.001 ↗
29. Strength, strain-rate sensitivity and ductility of copper with nanoscale twins10.1016/j.actamat.2006.06.062 ↗
30. Three-dimensional model of strength and ductility of polycrystalline copper containing nanoscale twins10.1016/j.actamat.2008.05.033 ↗
31. Crystal plasticity of nanotwinned microstructures: a discrete twin approach for copper10.1016/j.actamat.2011.05.036 ↗
32. Modulated oscillatory hardening and dynamic recrystallization in cryomilled nanocrystalline Zn10.1016/S1359-6454(02)00199-4 ↗
33. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
34. High tensile ductility and strength in bulk nanostructured nickel10.1002/adma.200800214 ↗
35. Tensile deformation and fracture mechanism of bulk bimodal ultrafine-grained Al-Mg alloy10.1007/s11661-009-0007-y ↗
36. Impact of the grain size distribution on the yield stress of heterogeneous materials10.1016/j.ijplas.2006.03.004 ↗
37. A bimodal bulk ultra-fine-grained nickel: experimental and micromechanical investigations10.1016/j.mechmat.2010.02.001 ↗
38. A statistical model for predicting the mechanical properties of nanostructured metals with bimodal grain size distribution10.1016/j.actamat.2012.06.059 ↗
39. Micromechanical simulation of fracture behavior of bimodal nanostructured metals10.1016/j.msea.2014.09.036 ↗
40. Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution10.1007/s00707-013-1050-8 ↗
41. Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper10.1115/1.4033519 ↗
42. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
43. Dynamic plastic deformation (DPD): a novel technique for synthesizing bulk nanostructured metals
44. Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures10.1016/j.actamat.2007.09.020 ↗
45. Make nanostructured metal exceptionally tough by introducing non-localized fracture behaviors10.1016/j.scriptamat.2008.04.048 ↗
46. Optimization of strain-rate to achieve exceptional mechanical properties of 304 stainless steel using high speed ultrasonic SMAT10.1016/j.actamat.2010.05.044 ↗
47. The influence of strain rate on the microstructure transition of 304 stainless steel10.1016/j.actamat.2011.03.005 ↗
48. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
49. Architectured surface layer with a gradient nanotwined structure in a Fe-Mn austenitic steel10.1016/j.scriptamat.2012.05.041 ↗
50. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility10.1016/j.actamat.2016.04.045 ↗
51. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
52. High Strength and High Ductility of Ultrafine-Grained. Interstitial-Free Steel Produced by ECAE and Annealing10.1007/s11661-011-1063-7 ↗
53. Enhancing torsion fatigue behaviour of a martensitic stainless steel by generating gradient nanograined layer via surface mechanical grinding treatment10.1179/1743284712Y.0000000192 ↗
54. Tension-induced softening and hardening in gradient nanograined surface layer in copper10.1016/j.scriptamat.2014.01.006 ↗
55. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
56. Modeling of the plastic deformation of nanostructured materials with grain size gradient10.1016/j.ijplas.2012.06.004 ↗
57. Gradient ultrafine-grained titanium: computational study of mechanical and damage behavior10.1016/j.actamat.2014.03.017 ↗
58. Microstructures-based constitutive analysis of mechanical properties of gradient-nanostructured 304 stainless steels10.1016/j.actamat.2017.02.035 ↗
59. Ashby · 1999
60. V. Congressional Record, 148, Pt. 4, 11 April 2002 to 24 April 2002 (US Congress, Washington, D.C, 2006.
61. Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes10.2355/isijinternational.43.438 ↗
62. B.C. De Cooman, K.G. Chin, J.K. Kim, High Mn TWIP steels for automotive applications, in: New Trends and Developments in Automotive System Engineering. (ed Chiaberge, M.) 101-128 (InTech, 2011.10.5772/14086 ↗
63. Constitutive model of the TWIP effect in a polycrystalline high manganese content austenitic steel10.1002/srin.200200212 ↗
64. High strength and high ductility copper obtained by topologically controlled planar heterogeneous structures10.1016/j.scriptamat.2016.07.003 ↗
65. The physics and phenomenology of strain hardening10.1016/S0079-6425(02)00003-8 ↗
66. Homogenization method for strength and inelastic behavior of nanocrystalline materials10.1016/j.ijplas.2004.02.002 ↗
67. Elastic solids with many cracks and related problems10.1016/S0065-2156(08)70176-5 ↗
68. A study of dynamic plasticity in austenite stainless steels with a gradient distribution of nanoscale twins10.1016/j.scriptamat.2017.02.005 ↗
69. A conventional theory of mechanism-based strain gradient plasticity10.1016/j.ijplas.2003.08.002 ↗