journal article·2017-01Open access

Influence of thermal treatments on the mechanical properties and the martensitic transformation in Fe-Pd-Mn ferromagnetic shape memory alloy

F.G. Bonifacich, J.I. Pérez-Landazábal, O.A. Lambri, P.B. Bozzano, V. Sánchez-Alarcos, J.A. García, G.I. Zelada, V. Recarte, G.J. Cuello

Abstract

Abstract The effects of high temperature thermal treatments on the hardening behaviour, the damping capacity and the martensitic transformation in Fe 66.8 Pd 30.7 Mn 2.5 Ferromagnetic Shape Memory Alloy have been determined by mechanical spectroscopy. Annealing below 753 K, lead to a hardening of the alloy without a marked decrease in the damping capacity. In addition, they increase both the austenite finish transformation temperature and the intensity of the damping peak related to the martensitic transformation. This variation can be controlled by the small volume fraction precipitation of small α phase particles. In contrast, thermal treatments performed above 753 K lead to a further hardening of the alloy, but they decrease the austenitic finish transformation temperature and the intensity of the damping peak related to the martensitic transformation; as a consequence of the decomposition of the metastable γ phase into the α+γ 1 stable phases. In addition, two new damping peaks related to the mobility of dislocations and grain boundaries have been discovered at around 700 K and 900 K, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Successive martensitic transformations in Fe-Pd alloys10.1016/0036-9748(81)90260-X ↗
2. Martensite transformations in Fe-Pd alloys
3. Martensitic transformation in the Fe–Pd alloy system10.2320/matertrans1960.25.585 ↗
4. Change in young's modulus of thermoelastic martensite Fe-Pd alloys10.1016/0036-9748(85)90321-7 ↗
5. Mechanism of FCC-FCT thermoelastic martensite transformation in Fe–Pd alloys10.2320/matertrans1960.27.719 ↗
6. Relation of magnetic domain structure to FCT martensite variants in Fe-Pd alloys10.1016/0036-9748(87)90182-7 ↗
7. Tweed structures associated with fcc-fct transformations in Fe-Pd alloys10.1007/BF02628361 ↗
8. High-resolution electron microscopy of the tweed microstructure in an Fe-Pd alloy10.1143/JJAP.27.L1387 ↗
9. Consideration of the tweed structure of Fe-Pd alloys by continuum elasticity theory10.4028/www.scientific.net/MSF.56-58.65 ↗
10. Analysis of lattice modulations in the tweed structure of an Fe–Pd alloy by image processing of a high-resolution electron micrograph10.1143/JJAP.29.2066 ↗
11. Role of annealing twin in the formation of variant structure of bct martensite in Fe–Pd alloy10.2320/matertrans1989.32.325 ↗
12. Initiation of FCC-FCT thermoelastic martensite transformation from premartensitic state of Fe-30 at% Pd alloys10.2320/matertrans1989.33.197 ↗
13. Phase transformation and magnetic anisotropy of an iron–palladium ferromagnetic shape-memory alloy10.1016/j.actamat.2003.08.024 ↗
14. Electronic and structural properties of Fe3Pd-Pt ferromagnetic shape memory alloys10.1063/1.1449443 ↗
15. Origin of tetragonality of BCT martensite in substitutional Fe–Pd (–Ni) disordered alloys10.2320/matertrans1989.33.215 ↗
16. Effect of Co and Ni on martensitic transformation and magnetic properties in Fe-Pd ferromagnetic shape memory alloys10.2320/matertrans.44.2499 ↗
17. Martensitic transformation in Pd-rich Fe–Pd–Pt alloy10.1016/S1359-6462(02)00349-4 ↗
18. Magnetostrictive and shape memory properties of Fe–Pd alloys with Co and Pt additions10.1088/0964-1726/14/5/014 ↗
19. Magnetic structure of an Fe–Pd–Rh alloy10.1063/1.2712174 ↗
20. Magnetostrictive strains in polycrystalline FePdRh alloy10.1063/1.2830965 ↗
21. Reversible and irreversible martensitic transformations in Fe-Pd and Fe-Pd-Co alloys10.1140/epjst/e2008-00661-7 ↗
22. Effect of Co and Mn doping on the martensitic transformations and magnetic properties of Fe-Pd ferromagnetic shape memory alloys10.4028/www.scientific.net/MSF.635.103 ↗
23. Effect of Mn addition on the structural and magnetic properties of Fe–Pd ferromagnetic shape memory alloys10.1016/j.actamat.2009.05.020 ↗
24. Hansen · 1985
25. Impact of local lattice distortions on the structural stability of Fe-Pd magnetic shape-memory alloys10.1103/PhysRevB.83.214415 ↗
26. Relaxation scenarios in Fe–Pd and Fe–Pd–Cu ferromagnetic shape memory splats: short range order and microstructure10.1016/j.scriptamat.2011.10.029 ↗
27. Plastic relaxation of the transformation strain energy of a misfitting spherical precipitate: ideal plastic behavior10.1007/BF02655099 ↗
28. Mura · 1987
29. The strain energy of a spheroidal inclusion and its application to bcc-hcp martensitic transformation10.1016/0001-6160(75)90099-1 ↗
30. On the minimization of strain energy in the martensitic transformation of titanium10.1016/0001-6160(77)90243-7 ↗
31. Shape memory alloys, Part I: general properties and modeling of single crystals10.1016/j.mechmat.2005.05.027 ↗
32. Shape memory alloys, Part II: modeling of polycrystals10.1016/j.mechmat.2005.08.003 ↗
33. Full tunability of strain along the fcc-bcc Bain path in epitaxial films and consequences for magnetic properties10.1103/PhysRevLett.103.216101 ↗
34. In situ Lorentz TEM magnetization studies on a Fe–Pd–Co martensitic alloy10.1016/j.actamat.2011.07.020 ↗
35. 2001
36. Nowick · 1972
37. Zener · 1956
38. A review on the problem of measuring nonlinear damping and the obtainment of intrinsic damping
39. Influence of defects on the irreversible phase transition in Fe–Pd ferromagnetic shape memory alloys10.1016/j.actamat.2014.11.054 ↗
40. Dynamic mechanical analysis of weak first-order martensitic transformation in an iron–palladium alloy10.1016/j.jallcom.2015.07.105 ↗
41. Mobility of twin boundaries in Fe-Pd ferromagnetic shape memory alloys10.2320/matertrans.M2016243 ↗
42. Internal friction behaviour of Ni-Mn-Ga10.1016/j.msea.2003.07.008 ↗
43. Damping capacity of thermoelastic martensite in shape memory alloys10.1016/S0925-8388(03)00268-8 ↗
44. Study of non-linear effects related to the Snoek-Köster relaxation in Nb10.1016/0925-8388(94)90477-4 ↗
45. Mechanical energy losses due to the movement of dislocations in molybdenum at high temperatures (0.3Tm)10.1016/j.jnucmat.2006.02.086 ↗
46. Peak Fit, V. 4, Jandel Scientific Software, Germany, 1995.
47. Friedel · 1967
48. F.Mezzetti, L.Passari, D.NobiliStudy of relaxation peaks in austenitic steels, in: Proceedings of the Fifth International Conference on Internal Friction and Ultrasonic Attenuation in Solids, vol. I, Aachen, Germany, 1973, pp. 436–443.10.1007/978-3-642-95275-3_47 ↗
49. Damping capacity in plastically deformed austenitic steels
50. Amplitude dependent damping study in austenitic stainless steels 316H and 304H, Its relation with the microstructure10.1016/S0022-3115(99)00070-7 ↗
51. Fricción interna debido a la interacción entre dislocaciones y átomos solutos10.1016/0001-6160(63)90096-8 ↗
52. Mechanism of carbon diffusion peak in fcc iron-nickel alloys10.7498/aps.14.354 ↗
53. Nature of the internal friction peak in face centered cubic interstitial solid solutions
54. The Snoek-Koester relaxation in body-centered cubic metals
55. Anelastic relaxation in high purity molybdenum single crystals at medium temperatures10.1016/j.msea.2003.06.007 ↗
56. Application of the positron annihilation technique in studies of defects in solids
57. Mechanical spectroscopy in commercial Fe–6 wt% Si alloys between 400 and 1000K10.1016/j.msea.2003.06.006 ↗
58. Philibert · 1991
59. Diffusion in materials – history and recent developments10.2320/matertrans1989.39.1169 ↗
60. Interaction processes between vacancies and dislocations in molybdenum in the temperature range around 0.3 of the melting temperature10.1016/j.jnucmat.2008.07.023 ↗
61. 1993
62. Bokshtein · 1980
63. Mechanical energy losses in plastically deformed and electron plus neutron irradiated high purity single crystalline molybdenum at elevated temperatures10.1002/pssa.201127703 ↗
64. Present state of the controversy about the grain boundary relaxation10.1007/BF02457391 ↗
65. Mechanical spectroscopy of commercial AZ91 magnesium alloy10.1016/S1359-6462(01)01171-X ↗
66. Effects of precipitation processes on damping and elastic modulus of WE 43 magnesium alloy10.1016/j.msea.2004.01.020 ↗
67. Use of the internal friction technique to measure rates of grain boundary sliding10.1016/0001-6160(74)90108-4 ↗
68. R. De Batist, Mechanical spectroscopy, in: E. Lifshitz (Ed.), Characterization of Materials, in: R.W. Cahn, P. Haasen, E.J. Kramer (Eds.), Materials Science and Technology, vol. 2B, Part II, VCH, Weinheim, 1991.
69. Massalski · 1996
70. Isothermal heat-treatment and phase transformation of Fe-Pd permanent magnet alloys10.2320/matertrans1960.24.144 ↗